The new update of the BlackRa1n Software to perform the Jailbreak as well as the software to release the iPhone (for use with any company) BlackSn0w has already been released. Remember that they already support the iPhone 3GS both to jailbreak and to release it.
If you already have the jailbreak and want to free your iPhone, you just have to add the reservoir to Cydia blackra1n.com and install the BlackSn0w App.
For those who are jailbreaking for the first time:
- Download BlacrkRa1n
- Connect iPhone
- Click on the only program button
- Wait for it to turn on again
- Enter the Blackra1n app.
- There you will find to install Cydia, BlackSn0w (unlock the iPhone) and iCy
- To free simply install BlackSn0w.
I just called with a Vodafone card and another from BT from my Movistar 3GS 32GB with 3.1.2 !!
Hello I wanted to ask if the BlackSnow is valid for unofficial mobiles of movistar and with the basend 05-11?
one thing that is not clear to me:
I have it with the old baseband, I update it with Itunes, I install blackra1n with the executable, then cydia and blacksn0w, all that well, but would my iPhone 3g be activated or would I have to activate it in some way?
Hi!… a question… I had already jailbroken the 3.1.2 firmware constum… I just downloaded the blackra1n and made it run… it ran and I reset it and everything… after I turned on the phone I looked at it and It is the same as before… identical… now, my question is, did the blackra1n do something ???
graciasss
blackra1n works only if you have the official apple firm 3.1.2 or 3.1
HELLO
I have an iphone2G and when doing the jailbreak according to your instructions and after the restart I do not get the blackra1n icon on the iphone, I already did this jailbreak on an iphone3GS with the previous version of blackra1n and it works perfect for me. Are there any known issues about blackra1n and the iphone2G?
Thanks in advance.
Look, blackra1n RC3, jailbrekea devices either ipod touch or iphone, with the 3.1.2 updated from baseband 5.11.07 and the blacksn0w, it unlocks the iphone with version 3.1.2, with baseband 5.11.07 ...
Can you confirm that you have activated it with an unofficial card and now the Push works correctly? Because if so, it is great news for all those who have acquired an iPhone in a non-legal way!
Thank you!!!
Do you know if the iTouch can now be jailed without turning it off ... I ask you to restore it when you turn it on ???
Jose, I understand what you mean, without a doubt, but there is a small problem and it is activating it without the original operator card ……., That is the point I am referring to, that if it is activated alone or you have to some way???
If I jailbreak my 3G 3.0 16gb. Will I have to reinstall all the Cydia applications or will it remain as it was but with the new firmware released?
Of course, if I update it to 3.1.2 before, everything will be erased, right?
Aptbackup and appbackup are the solution?
regards
sorry Mundi but I'm lost, can the 3GS be released in this way now? Thank you!
On a Movistar iPhone 3G, Jailbreaked with a Custom Firmware 3.1.2, do you know if by the nose, I have to Jailbreake it with the Blackra1n and then pass the BlackSn0w to it to release it?
Because apparently it only releases those that have previously been jailbroken with the Blackra1n ... and I would like to know, if someone has managed to unlock theirs, having previously jailbroken their device with a Custom Firmware.
Salu2 and thank you.
Hello I have an iphone 3g firware 05.11.07 3.1 will I be able to install the blacksnow from cydia please help
I am also interested in knowing if this is how Push will work.
Currently I have an iPhone 3G 16GB from the USA, with version 3.1.2, jailbrikeado and released using ultrasn0w, and I am not using Push applications (I have installed the firmware 3.1.2 modified from this page, installed the Push Fix application and nothing, it does not work).
I would like to know if by passing the Blackra1n and the Blacksn0w I will finally make the Push work for me.
However, I bought an AT&T SIM card on eBay to try to get the Push to work for me 🙂
Thank you
Very good badass question, I have not seen a useful question for a long time, if it can be released and Jailbreak the 3GS now I add it
Shit on your mother, you bastard world that you think you are son of the great whore
Hi, how are you? I'm only interested in updating the baseband, you know how to do it.
thank you very much.
My question is if this new version of Blackra1n allows the iphone with firmware 3.1.2, baseband 05.11 and new bootrom to be jailbroken without the need for it to be connected to the computer every time it is turned on.
Thank you
hello, the truth is that this guy is a real crack
iphone 3g (16GB) and iphone 3GS (32GB) updated with itunes, jailbroken, released and working perfectly !!! a 10 to Geohot !!
take care people and any questions you can ask
regards
Hi the blacksnow works only with the official apple firmware thanks
Let's see if I can clarify it ... I connect it, it synchronizes with iTunes and immediately afterwards I run Blackra1n, without having given it "eject" before, right?
I take this opportunity to congratulate you on the web, since I have the iPhone you are a must.
ATTENTION!!!!! IT DOES NOT WORK FOR THE LAST GENERATION 3GS AS THEY HAVE A DIFFERENT IBOOT !!! WHEN INSTALLING THE BLACKRA1N, THE PHONE IS IN RECOVERY MODE WHEN YOU RESTART IT AND TO START IT YOU NEED TO USE THE BLACKRA1N !!!
TAIS ADVISED !!
I have installed a custom FW from here on this page. of 3.1.2 with the old bb, logicamnte. Do not know what to do. I update to the official 3.1.2 and then I pass blackra1n and blacksnow? Or do I leave it as it is? This week I sell my 3G and I think I will restore and when he asks me to put the backup copy, I will leave it as 'new iPhone'. Then blackra1n and blacksnow would pass. So all the content is deleted from the iPhone?
Hola!
How can I update the baseband and re-jailbreak it without losing all the Cydia applications that I have installed?
Thank you
This guy is a crack porfin I already have the jailbreak and everything perfect Thanks from today he is my idol
Wenas, I do not want to be heavy, but can someone confirm that they have activated it with an unofficial card and now the "Push" works correctly and that "does not" receive notifications from others?
Because if so, people who, for example, have acquired an iPhone from the USA will be able to activate it with an Orange card, Vodafone, ... and use the Push !!!
Thank you very much!
HEY…. THE JAILBREAK AND RELEASE WITH THIS UPDATE ALSO APPLIES FOR IPHONE 2G ????? URGE ... ALREADY I WANT TO UPDATE THE FIRMWARE ... GRAX
Has anyone done it on windows 7? any problem?. Greetings
I have the official 3GS 3.1.2 with the baseband 05.11.07 and windows 7 and everything went excellent, I am free and working 100% Thank you !!!
Reporting me iphone 3Gs 3.1 unlocked and working 100 percent..with t-mobile fuck you at & t ,,, from Puerto Rico..thanksx geohot ..
Ami also went blank. But I did it again and it worked for me on 3gs.
Make sure you have closed / ALT / CONTROL / DELETE / All iTunes functions.
Now a strange thing happens to me when installing MobileSubstrate. I run out of Wifi. I reset the connections and it works until I completely turn off the iphone again.
Any solution?
Well, I have a problem and serious, version 3.1.2 iphone 3GS of 32 Gigas, install BlackSn0w and everything ok works with another sim from another company the problem is that the wifi networks were not working, it did not detect any, so as they say over there I restarted the network services and when the mobile was restarted it was already dead.
The apple logo appears and after a while it turns off and does the same thing again, I connect it to iTunes and it doesn't recognize me, it doesn't appear as USB or anything. I mean I have a dead phone.
ARgh !!!
That happened to me and I don't think I had the iBoot-359.3.2 because with the first version I did.
Do the DFU thing.
You already know with the iTunes on and the ipod connected with cable press the shutdown button (button at the top) and the Home button (below the screen) Wait about 10 seconds and stop pressing the shutdown button. But without dropping home.
Now I'm going to reinstall the first version if it works again.
I BY ERRO UPLOADED THE BASEBAN 05.11.07 AND FOUND A PROGRAM Q INSTALLED WITH CYDY AND I COULD DOWN IT TO 04.26.08 IT IS CALLED FUZZYBAND… SEARCH THEM ON GOOGLE AND READ THE INSTRUCTIONS I RECOMMEND IT TO AMI IF IT WORKED FOR ME ..
The wifi does not work for me, how can I install cydia if I always get TIME OUT when I do it with my 3g without… ..
Good morning everyone, I tell you that it would be good if you update a report about the new Iphone 3GS that are being distributed in the last two weeks which already come with a new iBoot-359.3.2. which does not allow jailbreak, now I have managed to sustain it by doing it with Blackra1n in windows, disabling the autolock and syn atumatic box in iTunes, we hope that soon our Gurus GeoHot and Deavteam will be able to get a new tool against this new strategy of Apple and as we say in my country ………. Apple here is your dad… .. (Geohot Devteam) Hehehehehe Thank you for your attention
July IMPOSSIBLE that with fuzzyband you have lowered the baseband from 5.11.07 to 4.26.08. That was tried more than 35134636 times by people who mistakenly updated and blocked the iPhone 3G with that baseband. Otherwise the blackra1n would not have been so expected for more than 2 months since 3.1 came out and hence the baseband update as well. NOT A viable SOLUTION. Use Blacksn0w that works perfectly and that's it.
Pure happiness I could no longer use my company and now it was released and had 5.11.07 it works very well and fast! Yeah!
Daniel… It worked for me the first time I can show you that it worked for me, I have it so I don't know how to show it to you…?
It is possible that the FuzzyBand worked for Julio Fajardo, the only thing that was needed to make it work is that the bootloader was 5.08, and that's it!
That bootloader came in the 3G that had come out before February 2009, the teams that come out after those yes no way!
Ok, that in the end does not matter, now we can update our iphones to the latest OS 3.1.2 and enjoy our phone with any operator, because blacksn0w makes it possible !!!
100% functional, I already tried it with an iPhone 3GS
Those of us who have the problem with the iPhone 3GS 32GB with the new iBoot, who sign up to make the geohot report, will already be aware? The thing is to also notify devteam to release a new tool for jailbreak with the new iBoot
I'm trying it with a 32 Gb iPod Touch officially updated to the latest version with iTunes. I open the Blackra1n, I give to make it ra1n and I turn on the iPod and when it starts up it stays with the “connect to iTunes” logo but it stays with the screen as orange… Has it happened to someone?
I can't get the balckra1n icon on my iphone… ..
can someone tell if the push works when jailbreaking ??? I have the iPhone 2g with version 3.1.2. Thank you
There is no case, I do everything and I cannot install blackra1n, it does the whole process alone but it does not install the application, I have an iphone 3g 16g
iTunes updated to today and new firmware updated with iTunes ...
that I can do?
claudio
Are you using Mac ???? because the same thing happened to me on mac I didn't want to work…. then I had to do it through windows ...... and it worked for me ...
Hello everyone, if I find out I just received my iphone 3gs with I imagine a new iboot I have done the backra1n thing and it works for me since I can put applications but if I turn it off it is over I have to restore someone it has already worked with the new version ?.
Another serious question can be put version 3.0 and put another program to jailbreak it. (I only want to add applications to my mobile, not release it)
Thank you
Carlos Nu, what version of modem does your 3gs have?
ruben has the 05.11.07 with version 3.1.2
Wenas to2 I have been 3 days with my iPhone 3G s of 32gb from VOMISTAR and the truth is that it is «easy» to jailbreak it, or whatever you say.
I have been from Nokia all my life, and I am getting familiar with this phone, but there is a lot of bad information on the internet.
ye put the Blackra1n but if you restart the iphone you will have to restore everything, ye put redsn0w, but it turns out that I do not want to restore the itunes the mobile, although I do it step by step.
anyway….
I don't know what to do ...
I will get the N900 that brings a linux operating system and is easier, ke this
Hi there!!!
I have followed the entire blakra1n installation process on my iphone 3gs 32gb but the final part, which is to install the cydia and snow from the iphone, gives me a cydia installation error.
is there someone who can help me?
Thank you
EMI first of all, if your iPhone recently bought it from you, it will give you a bit of trouble.
Since those of Apple have launched all the iPhones with new 1boot and tell you that the blackra1n will give problems a little.
Once installed you will not be able to restart the mobile because you will lose all the information and you will have to restore the mobile.
My advice on what you ask: is that once the blackra1n is installed on your mobile, wait for it to have 3G or Wi-Fi and then open the application, I advise you to only install cydia na more
Hello Terry !! First of all thank you !!!
I understand what you tell me, what I think my iphone was from an old stock since it came with 3.0.0.
What I was referring to is that once the process of downloading the file to the computer, connecting the iphone, install it, restart it, when opening the black1n on the iphone and install cydia, it takes a long time, until it ends up giving cydi failure! !!
When I try to do the process again, it keeps giving me that failure.
Ask if someone can give me a hand !! Thanks dew !!!
Emi: my bad advice is that you update it to 3.1.2 and then do the blackra1n thing, and I tell you my experience that I discovered it this afternoon.
If you turn off the phone, or restart, and it asks you to restore everything again.
You simply connect to the USB cable and then you give the blackra1n and it restores it without losing anything you had, it leaves it as you had configured it.
I hope I have helped you, since this is also new to me.
PS: I miss you nokia 🙁
Hello, I wanted to ask you a question, good results that my iPhone 3g just arrived and I do not know why I was given this tutorial and the result that I released it Comoros appears here and everything is perfect but now results that I want to return to as factory And I wanted to know if I restore it and update it again, the release will go and all without having problems with future updates, please alludenme
Hello namesake pos to restore you just connect the USB cable to the mobile, open Itunes and give it to restore.
If you give it to restore, it leaves it as the beginning erases everything
and it won't give you trouble at all.
Hope that helps
Hola!
I need help!!
My new iphone 3gs 32gb from two days ago:
- I got off Blackra1n
- I completely turn off iphone
- I run blackra1n
- I ask for iphone and connect it to usb
- he tells me «done»
- disconnect from usb
- I try to turn on iphone and it does not turn on!
- I open iTunes and the only thing I can do is restore.
Have I already lost everything? I can't install blackra1n? why?
Please someone help me, I'm a bit denied for these things ... hehehe !!!
Thank you!!
Hello Ducky, first of all at no time during the Tuto does he say that you have to turn off the mobile.
It is super easy to follow the TuTo ke is up to the letter And it will come out.
Do you know what happened to you?
iPhone has launched to get rid of the iPhone with a new 1boot that will give problems with the blackra1n and they were already solving it, they say there
If you install the blackra1n you should not restart the mobile or turn it off and if you happen to be restarted by accident, you connect it to the USB cable and give the blackrain to restore it and leave it as you had it, you can also restore it as many times Kieras with iTunes but it leaves you like new.
Hope that helps
Thank you very much Terry !!
I restored it and it kept me until the sms! it's great!
But one question… I have read somewhere that the brand new iphones have something different installed (sorry for the ignorance) and for that reason blackra1n does not work. Is it what you tell me that will give problems? I better wait then to jailbreak until there is a new blackra1n?
Thank you very much!
Hi Ducky again and I'm glad what I told you worked for you.
The new iPhone 3G s from October launched with new 1boot that give problems to blackra1n, which can be installed but you should not restart the iPhone or turn it off. Because it will ask you to restore it and you know what you can if that happens to you again.
Anyway
well I have a pretty serious problem to see if you can help me
to solve it because almost everything went well with the jailbreak, the only thing is that
cydia is not installed, what do I do ...
I forgot to say that it is an Iphone 3g and I have it with firmware 3.1, help me if you can, what can I do to install cydia?
Hello, I updated my ipone inadvertently to the most advanced version, and it got blocked. He asks me to put the original chip and I can only make emergency calls, I am desperate, I have been more than a month without being able to fix it, I would be very grateful if some of you would give me a hand, thank you I wait for your answers
Hi Emmanuel, let's see what you're saying, I imagine your phone is from another country ???? If so, you should get a simcard from the operator for which the phone was sold and in this way it will allow you to enter the phone to do the jailbreak process… .Any concerns do not hesitate to ask… ..
Anyone know if they solved this iphone 3GS 32GB iboot problem
Well, I wanted to know something, I just bought an iPhone 3GS 32gb and I would like to jailbreak it. Being new, it has the new iboot and I have the boot problem, could you tell me if by jailbreaking it with blackra1n and not being completely convinced by the boot problem, I could restore it without apple blocking it for having modified the ecid or how it was say that about 3gs iphones? thanks in advance
JAVIMELLADO there are no problems, I have the new one and it works well for me, the only thing is that you don't have to restart it outside the home because to start it you need a computer, it is easy when it crashes you connect to the computer and you start the blackra1n and you wait a little tight twice "Ok" and the iphone works without having to restore it or such ......
Hello javimellado, you can easily do it, I have the same problem, the only thing is that when you run out of battery ... that is to say that you run out of battery or when you restart for some reason you must connect it again to the computer with the application of blackra1n, but in my case I already made it routine and it does not bother me, also for enjoying the benefits of an iphone 3gs jailbreak ... believe me that the inconvenience is minimal hehehehe have a good day
If you already have a jailbroken iPhone 3.0, can you upgrade to version 3.1.2 without having to reinstall all pirated apps, cydia downloads, and folder settings, or do you have to reinstall everything and configure it again? ?
Thank you
Today I have lost my phone. It restarted when I installed an application and until I returned home to pass the blackrain to it, I was left hanging.
I look forward to the improvement of the blackrain quickly
regards
Hello friend and I am from Argentina, but I bought my iphone released and now when updating it without kerer to the latest version it blokio. A row has been going on for more than a month that no one finds the solution, why do I get a card without original, impossible friend, this crazy I don't know what to do, if you have any idea let me know, I'll thank you
Hello, how are you all… to confirm from Guadalajara, Mexico that this works perfectly. BlackSn0w and Blackra1n made it much easier for me to activate the iPhone 3G. Thanks to everyone who makes this website possible. And well, you have to contribute with a donation to http://www.blackra1n.com
do you have to connect the iphone on, off or in dfu mode ????
Greetings! I have an Iphone3G_16G, I migrated to OS 3.1.2 and I managed to free it using blackra1n all good for calls [Sure! Dominican rep]. But when I try to install Cydia from blackra1n it starts downloading, unpacking it, respringing; But the Cydia Icon never appears among the icons.
* I have tried several times, all the time it has wifi, I have restarted it and nothing. Can someone give me a help with this?
Hello good, I have the same problem that you have put many. I have the latest model of iPhone and I have already installed the jailbreak, but every time it turns off I have to open it with the computer and with the blackra1n ...
I would like to know if to avoid this, is there a way to eliminate the applications that appear in my blackra1n menu (the black tear), the one from Cydia and another that I got and I don't know what is called Installous ... and if I delete them Can I turn on the normal mobile? And when they create a valid jailbreak for the last iPhones, can I reinstall it?
Thank you very much
LET'S SEE ... I COMMENT A DOUBT.
I HAVE AN IPHONE 3G WITH MOVISTAR. COULD YOU FREE IT TO BE ABLE TO USE IT WITH ANY OTHER COMPANY AND CONTINUE USING IT WITH MOVISTAR AND ITS CORRESPONDING DATA PLAN (15EUROS / MONTH FLAT RATE)?
It happens that I have an iPhone 3g and I had the option to erase data activated after 10 attempts and a certain naughty hand was in charge of activating it and then I deleted everything, tell me what I do now because the Itunes does not recognize it ... it helps ...
Actualiphoneros brothers, how are you, to whom it may concern, greetings in advance, I have two 3 GB 8G iphones, one released, the other was released, but I put the firmware 3.1.2 since it had the firm 3.0 to my surprise, I updated one because it is more recent and another because the Bluetootch or the wifi did not work, I thought it was problems with the firm, which they think is from the mobile, now I can not install the snow because it does not connect to wifi or bluetotch, what can I Do you have any idea how to make a backup with all the programs that is running and put it on the other? If possible, tell me a name and a form that I will take care of the rest. Thanks in advance.
hi this works for iphone 3gs 32g with baseband 5.12.01 ??
I have it unlocked but not released….