Here we bring you custom firmwares prepared exclusively for you.
All are Hacked and do not upload the baseband (you can free with ultrasn0w).
If you have an iPhone with the operator's original sim card, you don't need these firmwares, you can jailbreak with Greenpois0n or Limera1n.
If you have already updated to iOS 4.1 you cannot unlock your iPhone or download the baseband, these firmwares only work if you are on a version prior to iOS 4.1
In the iPhone 3G I have not activated multitasking because in my opinion it does not work well.
They are installed from iTunes pressing Alt + Restore (on Mac) and Shift + Restore (on Windows).
Some people need to have PwnageTool open for it to work, so for Windows users I don't know if it will work for you, I await the results in the comments.
You have to put the iPhone in DFU mode to install it:
Connected to the computer, press Home + Power until the iPhone turns off and the apple appears again, then you release Power and hold home until the iTunes cable appears, then Shift + Restore or Alt + Restore and select these firmwares.
iPhone 3G - Click here
iPhone 3GS - Click here
Iphone 4 - Click here
Let's see if someone tries it on windows and tells us how… Anyway, I don't think it will take too long for the version for windows to come out, right? they usually come out relatively close to each other, don't they ???
As I said, a versi someone comments after doing it in windows.
Pd: thank you for keeping us constantly up to date on the iphone topic, for me you are the best page in Spanish that there is right now related to this topic and the most up-to-date one.
Downloading the 3G to use in Windows…. I'll tell you how it goes.
Multitasking on a 3G on iOS 4.1 works perfectly. Nothing to do with 4.0.
Does this restore erase the entire iPhone as factory? Or updating does not delete anything.
Thanks for the curre !! Does anyone know if the jailbreak is tethered in the 3GS with new iboot? As far as I know in the limerain and the greenpoison it is not, but I have the doubt if these customs follow the same process
A greeting!
a question! the power button does not work for me… is there a way to put the iphone in DFU mode without using this button ??? it's an old 3GS boot
I get error 1600 in win 7
I think I will have to wait for the iREB for 3gs or they will release the tool for Win
If it worked for someone, please post it
Greetings 😉
I think the iPhone 4 loaded: ((The firmware does not catch me when restoring, it does not pass half in the status bar ... Please HELP !!!! I had made the JB and it was fine until I installed something and restarted it was left hanging in the apple and it did not come out, so I had to restore, I made another custom to give it a little more root and when restoring it it crashed in the middle of the restoration. Then I tried with the original 4.1 and now it does not go beyond the half of the restoration bar….
Do you have any ideas please, HELP
For joan and lougedo ;:
Use iReb or Tinyumbrella to get him (and put him Joan) out of recovery mode
The same thing happened to me as nelmaster_vc: 3gs boot new, error 1600 (yes, in windows xp)
lougedo: the same thing happened to me, you have to install the ios from another computer.
I almost went crazy, but you can
as ireb is used in mac, I don't know how to download libusb, it's not like in windows. The tinyumbrella is not to save the ssh?
HOLY SHIT I don't know what happened when I had nothing but open the Tintumbrella
THANK YOU GONZALO
A doubt because with the limera1n and the greenpois0n towards the jailbreak and when restarting after installing something, it did not start and stayed in the block?
yesterday I tried with the pwnage tool and the first time but after 3 hours I uninstalled a couple of things from the cydia after trying them and Bumm again the hand hung when restarting ????
In the 3G it does not have multitasking, so I assume that it does have wallpaper and battery percentage, right?
I think I'm going to be encouraged to try it from Windows: the 4.1 that Sn0wbreeze created for me is not too fine.
The first time I tried the greenpoisOn I tried it from a pc, and it failed the first time, the limera1n was holding something else, so I had to wait for the pwnage tool, and now this, I don't know whether to do the jailbreak again or no, why these mistakes of getting caught on the block ??
I have tried to install the custom firmware made by me because it is free, and the restoration does not finish, it lacks nothing, but it has been like this for a long time now. I don't know whether to try to uninstall iTunes and reinstall it. You had to do a tutorial so as not to lose anything and not have to add or uncheck everything that I had seen before, games, podcasts ...
By the way, when the iTunes and cable symbol appears… isn't it the restore mode and not the DFU?
lougedo to several people the same thing happens to you, it happens to me too and I tried 1000 things but nothing ... .., it is best to keep communicated and when we have a solution, comment it here, if you have any solution or something, please comment me are the same
Greetings and see you soon
I have iPhone 4 16Gb and when I try to restore it gives me an error and tells me that the restoration has not been possible in mac and itunes 10
Notifications and youtube work. I released my iPhone 3G with iOS 4.1 but I have not been able to get the notifications or YouTube to work. Do these images do it?
In the previous post I have forgotten the questions in the first sentence. Do notifications and youtube work?
Let's see if someone comments on it
Hello. Well, I updated to 4.1 and since I did not read anywhere about the baseband ... because I'm silly, I anticipate it, well now I have the 02.10.04 baseband.
This means that I cannot release it yet, or that I will never be able to release it ...?
Thank you.
No Julieta, the only thing is that you have to wait for the iPhone wizards to take out for that baseband, I don't think it will take long.
is it necessary to have pwnageTool open? I want to do it on an iPhone 3G with jail 3.1.3 of which I don't have original sim, and I don't want to risk having it dead, I want to do it with windows, pwnage tools is only for mac
Gnzl, the question is: when the device is hacked, the Push is lost?
And on the other hand: all firmware created with PwnageTool 4.1 preserve the baseband? Or do you have to activate a special option?
All preserve the baseband by default
The push is normally lost, but I guess a pushFIx / doctor will come out right?
Hudiny, you leave me more calm ... I just bought the iphone 4 with vodafone and now God knows when I'll be able to use it as an mv for yoigo ...
Excuse me, I need to know if it works with an iPhone 3g 3.1.3 jailbreak with spirit or should this method have been used before? thanks in advance
With spirit no
You have to restore to 3.1.3 again
you have to do it as if it were a donwgrade, if you do it from iTunes bye
Hello everyone again, I have already jailbroken it again and now it seems that it is going well. Recapping before doing the jail this last time I realized that the failure of getting stuck in the apple, installed sbsettings and then the appsync 4.1 from repo.clubiphone.com, after installing it, it always hit, last night it had been enjoying the jail for 3 hours until I get home and install the appsync that repo, and bumm. again. And then it came about that I even did the restoration, that if I do not know why it was. Today thanks to GNZL I have been able to establish with tinyumbrella, and I have tried to do it with my custom and the restoration did not finish either, so I opened the umbrella, the bug is out. and on the iphone I look at the next page of the springboard and there was cydia, so if I had done the restoration right !!, then I decided NOT to install the Clubiphone Appsync but I did it from hackulo.us and it goes perfect.
Here is my story and problems with the jailbreak
sorry for the stump
Damn, «GOOD» I don't see, they are very close to each other 😀
Nothing, I am not able to install the FW. I start the ireb, doing all the steps until it ends up putting a screen on the iphone that puts Fimware custom waiting…. In itunes I give shift + restore, I select the FW and after 10 min preparing the iphone it returns error 1604.
Regards!!
Someone under Windows who has restored to a 3g and lived to tell about it?
Nothing, I have not been able to install it on a 3G from Windows. Not with iReb or anything.
I'll wait for the new sn0wbreeze, to see if it goes a little better than 2.0.2
I have a 3GS with a new boot and when restoring the firmware, the itunes gives me error 21. I have changed the usb port I have deleted the iTunes and I have reinstalled it and nothing! Do you know what it can be?
Are the ipod touch going to be uploaded ???
No raquel, upgrade to 4.1 and do the jail with Greenpois0n or limera1n
What was this firmware made with? because with SN0WBREEZE it has the problem of not saving the backup copies !!!!!
I have an iphone 4 4.1 with baseband 2.10.04 if I pass this modified Firmware it will lower me
to the baseband to the previous «releasable»?
ADMIRAL the baseband, even if you downgrade the firmware, it is impossible to download it. the baseband is already there !!!!!
Because it says at the beginning "If you have an iPhone with the operator's original sim card, you don't need these firmwares, you can jailbreak with Greenpois0n or Limera1n."
I have an original 3gs but I would not like to upload baseband in case I sell it one day ...
Do these firmwares work for me?
Hello everyone. At the time of restoring my iPone 4 to 4.1 with tiny umbrella so that it does not turn up the base band, it hung a little more than half and did not advance, I tried several times until I realized that when the process of rastauracion had to turn off the Umbrela. Then iTunes gives an error and iPhone is left with the «cable hung» (iTunes logo and the cable on the screen). turning on the umbrella again, clicking the button «Kick Device Out Of Recovery», it exits the recovery mode and turns on. ************************************************** ******************************************* I also noticed if the act Then you turn off the iPhone and jailbreak it, you don't need to activate it !!!
Enjoy it.
Greetings.
It does not work in windows for 3g and I tried it or with ireb it lets me install it
Thanks for the contributions. I have tried it on iphone 3 gs new bootroom with the latest version of itunes and it gives me error 21 even with tinyumbrella and tts server activated. I think these firmw are not valid for windows xp.
I also have error 21, with a windows 7.
Well, we're fine …… I've been there all afternoon and I can't get anything ……
By the way it is not the 1st JB that I do …… .I have been from the iPhone 2G and this has never happened to me…
these firm already come with cydia ??
Well, in winbugs it gives me error 21 xD
Jojojo, I started trying with this current iPhone option and because of things in life I came to this:
Follow this tutorial:
viewtopic.php? f = 56 & t = 3545
There is one caveat, however. If you use sn0wbreeze and select the activate option while creating your ipsw file, you will very likely no longer be able to backup or restore your iPhone using iTunes. There is an issue with the hacktivation portion of sn0wbreeze.
See details on a somewhat complicated solution here:
viewtopic.php? f = 8 & t = 3389
Running IOS 4.1 on Iphone 3g, activated and jailbroken, Recommendation: Slowly, read well, do not accelerate, I had to do it three times to realize that when building the ipsw I had left the "activate" option activated, so they should not do, in the second link are the instructions to hack it.
I had ios 3.1.2, so I had not updated the baseband, those who have 4.0 I think you can also, but each one study their case, for those who have 3.1.2 it serves and verified by this post.
Jojojojo, a while ago I was not so HAPPY !!!!
pS: don't activate multitasking when building the custom, there are other methods to do it. Shaolin !!! and thanks to this post.
Well, after being busy all day, and having infinite 16xx errors, I tell you my experience. I have a 3G that had the 3.1.3 with JB, and made with a powerbook g4 ...
Once I have the customized signature, made by me or downloaded there (look for there are many), the first error seemed to be that when trying to put it with iTunes and in DFU mode caused by myself ... chaska, it did not go.
Then I realized reading on the Dev-Team website that the DFU must be triggered from the PwageTool, once it has finished:
- CLOSE the program,
-disconnect iPhone, -
-connect again,
-restore the customized signature with iTunes
-and if the progress bar on the iPhone gets stuck near the end, open the PwageTool again, just open it.
I hope this helps someone.
If I already put the solution, but you have deleted my comment 🙁 Good luck.
Nobody has deleted anything.
Well, it seems that no one with windows has been able to update (with these customs), we will wait for snowbreeze. to see if it comes out this weekend. although from what they say, the better we stay at 4.0.1 star which is better than 4.1
Hello Alberto, according to your comment is that 4.0.1 is better than 4.1, I want to know why version 4.0.1 drives me crazy, very slow, it stops and this firmware is crazy. i have a 3g. please comment on the performance of firmware 4.1 thanks
They deleted what I asked !!!!!!! Well I would like to know if this firmware was created with SN0WBREEZE or with which one? xq with the sn0wbreeze I have problems with backups !!! I hope they answer me !!!!
Question: I have my iPhone with 4.0.2 (I think) + jailbreak and I wanted to go to 4.1 ... but if I load the new firmware (official and original) through iTunes, will my pirated apps be deleted? before being able to jailbreak ??
Hi, I have an iPhone 4 with version 4.0.1 and every time I try to restore with iTunes using the firmware you have set, I get an error (sometimes 21 and sometimes 1600) and it won't let me start. I have tried it in DFU mode, in recovery mode, with the Pwnage open, closed, all the combinations and it still does not work.
Do I need something to do?
Hello again, I already managed to solve it, now the problem I have is that when I put this firmware that you have put in, it appears "no service", that is, I have no coverage, I cannot call! everything else works except the phone ...
Please tell me how to solve it because I am already desperate searching the internet and not finding anything.
I don't think you searched much like you say
you have to install ultrasn0w from cydia
it won't let me install and firmware I have a 3g, what am I doing wrong? I have tested it in dfu mode and with the pwnage open, you can give me more precise instructions, thanks !!
Gondip how did you get it to install the firmware? Could you explain it to me? Thank you
more precise instructions:
https://www.actualidadiphone.com/2010/10/20/tutorial-para-instalar-ios-4-1-con-pwnagetool/
I have not been able to update with these custom firmware, neither in windows 7, nor in a MAC. It gave me an error when entering DFU mode with PWNAGE TOOLS ... I don't know what could be happening, My phone is unusable, right now I'm restoring it as it was with firmware 4.0.
Gnzl tell me these firmwares you made it so that there are no problems with hacking I have a
3gs ios 3.1.2 new model and baseband that can be unlocked thanks in advance for uploading the firmwares
I require one not hacktivated !! Since loading these ios the operator settings are not updated !! And it does not stop leaving a little message in the sms that the mobile data is deactivated !! And another the wifi does not turn off !! In sleep mode !! It eats the battery beastly !!
For those that give you an error, with those rare numbers, before installing the custom firmware you have to pass it the latest version of ireb, which can be found on this site http://ih8sn0w.com/index.php/welcome.snow. hello2