These custom firmwares 5.0.1 with jailbreak untethered, hacktivados and that do not modify the baseband have been created by Actualidad iPhone exclusively for its readers.
With them you can keep your baseband to keep the liberation from your iPhone with Ultrasn0w or Gevey SIM. You just have to install them by pressing SHIFT + Restore (Alt + Restore on Mac) in iTunes and selecting the downloaded firmware.
Hacking can cause problems with push notifications, for this we recommend using SAM or push doctor.
If you don't need release or keep baseband I recommend using Redsn0w.
Custom Firmware 5.0.1 for iPhone 4.
Custom Firmware 5.0.1 for the iPhone 3GS.
NOTE: it seems that there is a problem with PwnageTool, the application with which we have created these firmwares and the hacktivation fails even if you select it correctly in the menu. Wait for an update or use Redsn0w if you don't need to keep baseband.
Very good Gnzl. Thank you for the tremendous work that the entire team does.
Just a question. To put this Custom, it is not necessary to put it in Pwned DFU mode before?
Hello. Thank you very much in advance for the effort and inconvenience. Just a question: I know how to enter the custom (DFU mode is not necessary, but in the way you indicate), but (and forgive my ignorance), I should put the custom in it and then do something else or it will already be with the unthetered jail incorporated ? Greetings
Hello, I have baseband 04.11.08 and I have already jailbroken untethered, how can I change baseband !? Thank you
Hello good!! Very good job, as always, you will never stop surprising us… !!
I have a question: I have firmware 5.0, can I use these 5.0.1 Custom firmwares directly or do I first have to update to 5.0.1 without uploading the baseband via Redsn0w?
It won't be an innocent right? Hahaha
Where do you download push doctor, very good contribution thank you
Many thanks to this iPhone News team !!!
You make great contributions 🙂
You can publish if someone has installed it and it went well ... Thank you very much for this work
When installing it in DFU mode I get the error "1600" as soon as I start the restoration of a 3GS.
So I have tried it in normal mode and I get the error "1604", any ideas?
Correct me if I'm wrong. I currently have it tethered on iOS 5.0. From iTunes I install this firmware and without further ado I already have it with untethered in iOS 5.0.1? That easy, without more? In my case, I am officially with Movistar, will I have a problem with push notifications (due to activation)? Thanks.
Do I have to put them in DFU mode?
someone explain a little more !!! please ! You have to put it in dfu, then you have to jalibreke it with resn0ws?
In theory you do not have to put it in dfu only from itunes press shiff from and restore at the same time and itunes will let you choose the location where you have downloaded the firmware, and once it is installed, you have it jailbreaked. BUT notice I have not tried it, I hope someone puts a comment that it has gone well .. Let me know if you try it ..
Thankssssssss
juan, if I'm not mistaken, this firmware 5.0.1 with jailbreak untethered is the previous step that is done with resn0ws… when you download the original firmware and then create it based on that. … Is it as I say ???
Press shiff and restore at the same time and thus lets you choose the location of the downloaded firmware
Nothing, there is no way. I have the 3GS with v 4.2.1 and I get the 16xx errors, I have even tried with the "iREB" tool and neither. I have restored to v 4.2.1, to make a clean restoration to v 5.0.1 of the above downloaded and nothing, more 16xx errors.
I think that the activation of the firmware 5.0.1 that you have put above is not activated, hence the problem.
I hope they release the PwnageTool for win… soon.
Sorry, it was not shif but we go to iTunes and click on Alt + Restore (MAC) or Shift + Restore (Windows), a new window will open, we look for the new downloaded firmware and that's it !!!.
To solve error 16xx you have to use a program called iReb, there they will guide you to put the iPhone in dfu mode and then iTunes is opened and the shift button on the keyboard is pressed together with clicking on restore and there you choose the firmware. I don't know about the other, but I think that if you specify that they are custom with jailbreak untethered, you should not pass redsnow. I hope it serves you. Greetings.
Thanks my corduroy! I'm downloading! when I try it I will tell you how it went! Health!
Thanks for the firmwares, but wouldn't it be possible to publish them without activating?
I already had a lot of problems with push in the past and I prefer to activate the iphone with the original card.
Thank you again.
Normally, whoever enters a custom, is because he does not use the iPhone with the operator with which he has taken the phone, and hence the one that is usually made hacktivados, because whoever uses the iPhone with the operator is the same as the baseband he has, since you don't need to have it released.
In part you are right, but in part not, those who have the 3gs with baseband 5.15.x if they go up from baseban I understand by many users that they are left without wifi or without gps…., So it is not only to free it….
I have it live, but I don't want to risk uploading the baseband and then running out of gps or wifi….
No, that is not like that.
Any official firmware does not leave you anything useless.
That happened to those who put the baseband of the ipad 3 1g in the 3GS to be able to release it a while ago, but only to those.
I have put this custom in iphone 4 to preserve the releasable baseband that I have.
I have done it from a MAC and I have not had any type of problem, it has been installed correctly and I already have it working.
To those that give you an error, see if you have activated the umbrella server, maybe for that reason it is giving you the problem, or if you have modified the Host files. Because apple is signing this firmware and you shouldn't have any problem.
trenti, I ask you a question, once you installed it, you already have cydia installed, or you have to do something. we only connect it to itunes with alt + restore, we mark the firmware that we download from here, it is installed and ready ??? if so, very good !!! and fundamental that the baseband does not rise
Ready, I have managed to restore it, what interfered me was the hosts file that I modified to be able to do the jail to v 4.2.1 that redirected the activation to cydia. After running 74.208.10.249 gs.apple.com from the hosts file, I used the iReb and it updated it correctly to v 5.0.1, keeping my baseband (5.15.04).
My iphone is company-unlocked, so I don't know if it auto-activates or not. You just need to test the push and notifications.
Thank you #Gnzl
But this has to be done after installing ios5? or before?
I have restored from 4.0.1 releasable baseband using first a mac (error 1604), and then on windows the same until I used iReb to put it in DFU. The problem now is that I don't have the original company sim, and I can't get past the initial setting screen. Any advice?
But if this custom is Hacked, so you don't need the original sim to activate it, it already comes in the custom.
I know, that's why I don't understand why you're asking me now. But I have tried with my sims (none the original from series or from the company), and it still does not work, I cannot go through the configuration screen without a card inserted: /
You say no card inserted? It is that although this hacktivated, you must have a SIM inside the iphone, the thing about the hackivation is so that it can be started without the SIM of the original operator, but a SIM does have to be inserted in the iphone.
I am in the same situation as Xurxo, I have put this CFW on it but it does not pass from the config. of the SIM, although I have the gevey with the SIM inserted, but nothing. 🙁
Surely you have a colleague or acquaintance who leaves you a SIM from the official operator, with that it would be worth.
to this custom tb there is k to pass the redsnow again to fix the fault that?
It does not matter that the gevey sim is in? Another question I have v 4.3.3, I simply update through iTunes with this custom firmware and this is not it? I should go no!? Thank you 🙂
Nothing hacked, I just put the 5.0.1 custom downloaded from here and it tells me that the sim is invalid ...
Same problem, it is not hacked.
Fuck !!!
It gives me errors when restoring -.-
Is it hacked then or not? I'm interested without hacktivar !!
NOTHING ... installed and it is not hackative .. there is no way to activate the mobile .. go fabric 🙁
Another error while restoring ... FAIL
Nothing, as you all point out, is not hacked, and no matter how much gevey or ultrasn0w happens to it, there is no way it works. Now what?
It is not activated and I have tried SAM and it is not possible, it still does not activate and I still do not have Facetime and notifications ... What could be the solution?
Hahaha
HAPPY DAY OF THE SAINT INNOCENTS !!! 😉
HAVE YOU BEEN AN INNOCENTED? I KILL YOU !!!! :) :) :)
Seriously ... is it hacked?
ahh nono ... I say it will be an innocent thing about the thread .. you will see!
Not mine ... I have installed on the iphone of a colleague who needed this to be activated and NOTHING does not activate the mobile ... my comment is simple despair lol
Come on ... almost better I wait for sn0wbreeze to come out and do the custom myself, because with this one it's not going to be ... right?
With the Sn0Wbreeze if it is activated?
I have gone through the activation problem, but I have opened redsn0w I have passed the jailbreak and it has activated me without problems ...
Luck!
Hugo: Can you explain to us how you have done it exactly? It would be a great help!!! 🙂
Well I was in the same step as everyone, I have put the custom firmware. For those who have errors when loading them of the 16XX type, I recommend that you use iReb to put the iPhone in DFU mode and then open iTunes and restore with the Custom Firmware.
Once here when configuring language, country and location, it does not let go further since it detects that the SIM card I have is not the original one.
I close everything, I open RedSn0w, the latest version, I click on jailbreak, I follow the instructions that it indicates to me and the operations begin, when I restart I can access the desktop and with Cydia perfectly installed.
Baseband preserved and working.
I have only had a small problem, I have configured it as a new iphone, not from the backup I had, and now I am not able to load my copy.
Does anyone know how to do it?
Thank you!
I can not help you with the copy ... but a question ...
I have also passed the redsnow after seeing that the iphone is not activated .. when you have jail and it asks you to Install cydia .. do you also deactivate iphone?
I have also passed the redsnow and NOTHING
I have only selected Install Cydia, nothing else ...
Hey.
I have done the same as Hugo and if the copy is loaded, it has been automatic.
When passing redsnow I have not selected anything but Install Cydia
It is not hacktivated !! 🙁
Hello, I have an iPhone 4 released with gevey, does the custom firmware serve me? How do I not upload the baseband, with what program?
Well, as the gentlemen who have made this custom do not provide us with a solution to the activation problem, we are clear about it.
I have tried to activate it with a SIM of the operator for which it is blocked, and I can access the iphone, I install the ultrasn0w, appsinck, etc and then I remove the SIM and put the one of another operator, it restarts and tells me that the activation, that is, it is not worth activating it with the operator's SIM and then inserting another one from a different one.
They have made us shit but good.
It is not an innocent, it is hacktivated, then the liberation has to be done by each one in their own way.
You are not wrong. One thing is the release for the phone to allow calls with the SIM of any operator, and quite another is the Activation of the iphone to allow you to access its use.
I know what each thing is, this firmware I have created myself, and it is hacktivated.
.
If necessary, I will make a new one.
.
You also have the tutor on the cover to do it yourself
Well, your custom firmware doesn't work, if you've screwed up, assume it and try to fix it and don't be an edge to people, many people have messed up doing this that you show here.
Try putting another custom firmware Gonzalo! Surely it will be great if you check it out.
All the best
I have not put edge at any time, re-read what I have written because you must have misinterpreted it.
.
In fact, the one who has not been correct in the ways has been you, comments like yours take away the desire to do this "work".
It was not my intention.
But why do you answer so quickly to this and when you are asked questions do you go over 55 questions out of 60? It would take you a short time, you answer half of them with a yes, this or no, the other.
Sorry if I got a little bad, but I would like you to make things easier for those of us who do not know as much about the subject as the majority of AI readers.
Today, that I am on vacation, I have gone on an excursion, when I arrived I had 187 emails, I cannot answer them all, most of the questions are solved in the tutorials, the rest are quickly solved in google.
.
This is a hobby for me, it is not a job, I have my separate job, this week I'm on vacation, I can't spend the day answering comments ...
.
My job on the blog is to do tutorials, not answer the comments (I tell you officially, it is not part of my job here), I answer as many as I can, but it is impossible to manage everything.
.
I'm sorry.
Gzlo is not hacktivated, maybe you missed the option, if you can upload the two 3gs and 4 hacktivados and 3gs 4 not hacktivados, thank you very much despite this small error, you are the best, oh, be patient if it does not come out the first time. We get angry but let's keep trying, happy holidays to all and a prosperous year 2012
I did not miss marking the option, I am 100% sure, I have heard that there are people who have had the same thing creating it, it may be a pwnagetool failure.
.
I'm going to do it and upload it again, but it takes 8 hours to upload, it will be tomorrow ..
.
A greeting.
Don't bother doing them. A moderator of the iphone-dev forum has acknowledged the bug and advises redsnow while they fix the problem.
“There seems to be a lack of hacktivation in the newest PwnageTool. «
Thanks for the warning, I put it in the post.
thank you very much makina !!!!
Gentlemen, after eating the coconut a lot seeing that the iphone could not be activated to use any SIM, I have managed to find the solution.
It is essential to make a first activation using the SIM of the company for which the phone is blocked, but so that later you can put another SIM and not ask for the activation again, the solution in the ZIP that I have posted on Megaupload .
This is the address to download it.
I hope you like it.
http://www.megaupload.com/?d=0OM3FXP6
Greetings and enjoy the iphone.
IT HAS WORKED!!! THANK YOU serisa64 !!!
I confirm that to perform the famous activation download the link that comments serisa64 !!!!
Thank you very much for everything Gonzalo !!! You do a phenomenal job !!
I was able to activate it with Redsnow… I can install Ultrasn0w but it doesn't catch me coverage.
This is all sooo weird!
The same, ultrsnow installed and puts No service. And push notifications are dead
Reinstall the custon normally, then you activate the iphone with a valid operator SIM and do the manual that you can download at the megaupload address that I have put a few posts above.
So you fix it fixed.
The problem in my case is that I will not be able to get an original sim (Orange UK) 🙁
Sorry, could you put a link for a reliable tutorial to use SAM and fix notifications?
Thanks in advance
For an iphone with the operator's own SIM, although with an old baseband (in case some day I need to put a different SIM in it) would this firm be worth it? although not hacktivated.
From what I understand, the hacktivation is only valid to activate the phone and with a SIM from the operator itself, it should activate it and without changing the baseband or anything like that, right?
Greetings.
I have the solution for those who do not activate the iphone after installing the custom!
I've been with 2 iphone 3gs since yesterday, and I have finally achieved it:
1. Create a Custom firmware with redsn0w, from the extras section.
2. put the iphone in DFU, with redsn0w
3. Load the custom with itunes.
4. Pass redsn0w, selecting install cydia.
5. the activated iphone will be restarted, and with cydia.
6. install corona from cydia
READY, the iphone will be activated !!!
I usually activate iPhones always with SIM cards ... I have one from Orange, one from Vodafone, one from Movistar and one from AT&T that are no longer in operation but that are already good for this. Surely a colleague of yours has SIM dead laughing at home of some portability.
Hacking has always given one problem or another ...
Hello, how do I have the iPhone 4 with 5.0 and the firmware 04.11.08?
My question is if I can do the jb updating to 5.0.1 and if I can use UltraSnow to put the phone with another operator in another country .. !! I live in the USA and I plan to send the phone to Ecuador where it would work with Claro .. !!
I need to keep the baseband, I hope then?
I need to keep the baseband to continue with the gevey sim, what do I do? (I use PC)
I have a question, what is the use of the button in extras in the network Sn0w Custom IPSW «Preserve base band with a custom IPSW»?
I want to thank gnzl infinitely thanks to this tutorial and the link of the custom firmware I am writing to you from my iphone 4 with ios 5.0.1 and jailbreak untethered without uploading baseband I tell you my new year story hehe on the 31 as at 5 I decided to jailbreak it and upload my iphone to ios 5.0.1 (my iphones is 4 I have baseband 4.10.01 and I had ios 4.3.5 I use gevey to be able to open it and use telcel I'm from Mexico) without uploading baseband xq if not my iphone was going to become an expensive ipod after checking several tutos and news of how to make jail without uploading bb I did it through sn0wbreeze the last one I do not remember the version because everything was excellent until in my pho and it was frozen in the apple of apple and from there I started crying I downloaded all the firmwares I wanted to do it through redsn0w and nothing happened from the inche apple was frozen and did not load until I download this link of the custom made by the genius of gnzl I tell you to pass one to me of the worst years evos since I was able to restore my iphone until day 1 almost at 12 in the morning of day 2 use the sn0wbreeze irb to put it in dfu then enter itunes and shift + update select the custom of gnzl and TRAZZZ !!! My iPhone was restoring God I wanted to cry then I was afraid that the baseband would be uploaded (I clarify I am a newbie in this jailbreak and I had an iPhone for 3 years and I had never jailed until now and I did that more than anything to update ios but this man is a genius and I wanted to thank "personally" gnzl) and then checking all that if he asked me to put the original at & t sim, thank god I had it, I put it in, the iphone was completely restored by checking ios 5.0.1 baseband 4.10.01 I really think I cry this was the worst and the best start to the year of my life and nothing got my gevey and TRAZZZ !! Telcel 100% woooowwww I hope my anecdote will serve several of you I looked for a lot and I did not have to do it thanks gnzl x making it possible greetings to all and I hope you have a very good year I hope you enjoy it as I do
aaaa and those of us who do not have the sim of at & t ._. ? I got stuck where sim asks me, I have gevey to use it with telcel
Hi, are you going to publish the custom firmware again?
I would be very grateful.
Miguel A.
I tell you my experience for those who have problems with these cutom. I installed this custom but I did not start my iPhone 4 so a little desperate I chose to download redsnow beta 3 the last one and create my own custom once I create it I put my iPhone 4 in dfu mode and restore with iTunes I did not get any error once I immediately installed the jaibreak with the redsnow and everything was perfect I started my iphone I configured it with the rules of my country and then I put the gevey and after a while I took a signal from my iporeador the notifications puh did not work but I activated them with the sam from cydia and now my iphone works very well it is harder for the battery than in version 4 I think that with my experience I think the redsnow is more reliable also it never asked me for the original sim of my iphone I imagine that this custom created with redsnow is hacked
Good afternoon my corduroy, I did exactly the same as you but the only thing I need is to activate the push notifications, would you be kind enough to tell me how to do it or a tutorial link to do it. Thank you very much in advance my corduroy! a hug from Venezuela!
To activate the notifications I first have to install Samy Sam pref that you find it in cydia once it is installed we have to follow a few steps that if you inform me your email I give you the address of the video I followed it as it is and it worked for me the only thing that It is important for the notifications to be activated is that you have to know the cell phone operator which is authorized your iPhone, otherwise you would have to try with many companies and it would be delayed send me the mail and I will post the video tutorial greetings
I have a question to see if you can help me. I am going to update my iphone to 5.0.1. It is from vodafone and I use a gevey for another sim. The question is: Once updated, will I need a vodafone sim to start it?
Gracias y saludos.
Hello, I restored it by keeping baseband with pwnage tool, which supposedly would release my iphone, because when I finished everything, what I found was a very expensive brick, since iTunes asks me for the original sim that of course I do not have. So I have a restored phone but without being able to access it, without being able to know if it kept the old baseband, and without being able to unlock it or jailbreak it!
Can someone provide me with a solution? Thanks a lot
When will they be raised again? megaupload already passed away!
regards
There is a mirror to download the custom ones, ME's no longer pulls ...... we all know why
someone who has downloaded that cunstom firmware to send it to me by email since there is no way to download it
How are you, please, I want to ask you a favor, I have an iPhone 2g and I would like to upload its version to 5.0.1 without changing the baseband, is there any way of that
to be able to request a new active and functional download link to be able to download Custom Firmware 5.0.1 for the iPhone 4. and Custom Firmware 5.0.1 for the iPhone 3GS.