Much has been said about this application which is very useful but at the moment the only way to install is this, we already read it in one previous post But here it is for those who want to try the version patched to full which must install via ssh following the guide that we have already dealt with in this post: Install Applications via ssh
Processing:
We download the file iBluetooth.app.rar
We unzip the downloaded file and we will have a folder called iBluetooth.app, we install it via ssh to the iPhone following the process that I already said above in the / applications path.
We give the permissions 0777 recursively, that is, to all the folders and internal files of the iBluetooth.app folder (we do this from the browser that we are using either Winscp, filezilla, etc.)
We restart the iPhone and transfer files, you can know how the application is used in the following entry: How to use.
Note: this version maybe because it is the first to develop the use of the iPhone's bluetooth as a normal phone (that is, it is not equipped) is not completely finished but you can test it with small files such as images with which it does not give much problem, but with large files such as songs, sometimes it does not finish passing them or one happens and another does not happen.
But they can also download it easier and faster from the ClubiFone repo:
just add in cydia:
http://clubifone.org/repo/
I can send files perfectly but when trying to receive it says a failure in the bluetooth connection, does anyone know why ??? Thank you
I have done everything as you say, but the application icon does not appear on my iphone. It is a 2.2.1 3g… what am I doing wrong? I restart and nothing does not come out, to the application folder there is to give it the same permission is say 0777?
The same thing happens to me as David, but I have given 0777 permissions to all the files, the only thing I have a question about. In what folder exactly should it be put ???
Can you write me the full path ??? Thanks!!!
DAVID, Energy,
It also happened to me, to solve it I have entered the BossPrefs (if you have it) and I have marked it so that it does not show me the icon (at the beginning it was enabled), I have left the springboard and it still did not appear. Then I went back in, enabled it and when I returned to the springboard, it already appears.
I hope it helps you
The same happens to me.
I install it, I give it the permissions, I restart the iPhone and when I give it to the program it tells me:
Error
Unable to start the stack, please try restarting the application. If the problem persists, try rebooting the device.
Ditto. Permission 0777 recurring, I enter subfolders, I don't know why permission 0777 is not applied to those files and I apply it, but nothing, it does not appear on the iphone ...
But why do you insist on giving it 777 permits? It has worked for me with 755. Doing what I said above
friend, we give permission to 0777 for the simple reason that the friend who made the tutorial indicates so:
»We recursively give the 0777 permissions, that is, to all the folders and internal files of the iBluetooth.app folder (we do this from the browser we are using, be it Winscp, filezilla, etc.)»
I even installed it from the clubifone repo and it tells me that it can't be opened ... what's up?
terroba,
It has worked for me with the permissions that I tell you. Anyway, if you follow the link that comes at the beginning of the post «Install Applications via ssh», it tells you that the necessary permissions are 755
Apparently there are problems with the transfer of music and videos, I have not been able to send or receive other video or music equipment, will it be because of the format ???
But installing the clubifone Repo does it install the full version or the 6-day trial?
damn pirates! this page sux
Shut up GIL !!!!!!
hello, another one that joins those that does not appear in the icon, I have also done what "rubenysuifon" said and I am still the same.
If someone has solved it please leave a brief explanation.
All the best
The icon does not appear to me either: s
I have done the boss prefs, I have tried to put it in the 755 permissions and nothing at all
Help to!!
The same thing happens to me too, I uploaded the .app by SSH, first I gave permissions 0755 and nothing happened, then I gave permission 0777 and the icon does not appear, I hope they upload the .ipa later and it is available in Cydia or Installous .
(I did the BossPref thing and it didn't work out either)
If someone solves it please let me know !!
greetings.
a.
In the other post I did what they said and everything without problems, and without giving permissions or anything like that…. and I have been able to send videos of the cycorder ...
The application icon does not appear to me either and I have followed everything to the letter, does anyone know any solution ?????
Hello, I download it from cydia and it tells me that it cannot be opened, I try to enter it by ssh and I do not get the icon, there must be an error or something in all this, if someone knows something about what it could be, what Please say so, I am beginning to think that it is because of something on my mobile or that it has something open that does not let you open the application, you have to have something installed, I don't know, a greeting.
For those who do not see the icon after restarting, just restart the springboard and it already appears, at least it worked for me.
Hello everyone, when using WinSCP to access my iphone, I try to change the famous permissions but I can't get an error when doing so:
Command 'chmod 0777 "Documents"'
failed with return code 137 and error message
-sh: line 52: 236 Killed chmod 0777 "Documents".
PLEASE HELP!!!! 🙁
Well I did it with the winscp and it worked for me, but I did it with the 755.
tp I could see the icon, but it is easy to see it on the screen.
what to do is-:
1. When you finish installing from winscp, restart the iphone (turning off is not the same as restarting) (you can restart it can be done in 2 ways: pressing the home button and the top button for 10 seconds, or go to bosspfrefs and go down there where it says power and then press rebbot.
2. After the iPhone is rebooted, you will see the icon. Now what you have to do is get into bosspfres press power and then press fast respring.
and voila the sprinboard will be restarted and voila, the icon will appear there
I also get the error
Unable to start the stack, please try restarting the application. If the problem persists, try rebooting the device.
How do I solve it??
Rafael ami that error I solve it in the same way that I put above.
I do a fast respring and I go back in until the program works for me.
PS: I tell you, because the program worked for me and suddenly I got the error and I did what I told you and that's it, it worked again
I have managed to make the icon appear but when I open the application I get the famous error, Unable to start the stack, please try restarting the application. If the problem persist, try rebooting the device.
I have followed all the steps that are said here, the fast respring thing and all that but it keeps giving me the error, how can this be solved?
Saludos y gracias
It happened to me exactly all the errors that they described above and I was solving them according to what each one indicated first, the solution icon did not appear: restart the springboard via boss prefs then I got «Unable to start the stack, please try restarting the application. If the problem persist, try rebooting the device »solution: change the permissions to 7777
Thanks "rod2" I have changed the permissions to 7777 and it has worked great for me. A crash 😉
I did step by step ... and if the icon appears but it gives me the error that one, with permissions 0775 and 0777 ... I don't know what it will do
Setting the permissions to 7777 is how I made it work myself
Hi, I have a 3G iphone, I installed winSCP but I can't connect. the firmware I have is 2.2.1 and it seems that the password "alpine" does not work with this firmware. Can anybody help me? Thanks
martin you have to follow the following steps:
connect your iphone to pc
connect your iphone to wifi
in winscp put the ip of your iphone, the port is 22 leave it as is
user: root
pass: alpine
and ready
I already tried permissions 0777, 7777, 0775; The icon appears but and the loading screen appears, but then the application is exited. The Firmwire of my iphone is 1.1.4. I hope someone has an answer
Or in case I have to activate bluetooth.
Hi Anthony, I can't connect, I get the sign with connection refused. I imagine that since the password is up to firmware 2.2 it could change to 2.2.1
I already did it Anthony, I was missing the openSCH program, now I am fighting for the icon to appear ...
When I click on the icon I get «the application« iBluetooth »cannot be opened» I have already changed the permissions and tried everything but it still won't let me. Any solution? My firmware is 2.1
THIS APPLICATION WHAT SOFTWARE REQUIRES? I have 2.0, will I run?
For those of you who have problems, I recommend making sure that you change the permissions to 7777, make sure that everything is marked and do not get confused with 0777 with this it will serve you temporarily but putting all 7 will always work for you, also always remember the respring step or restart if it's not like you haven't done anything
Hello, I have followed all the steps, I have put and checked that all the permissions are in 7777 (for folders and files), I have restarted and I have managed to get the application icon. But when I try to start the application it tells me "The ibluetooth application cannot be opened", can someone tell me what I am doing wrong?
Hello, I also got the famous error, but as they say before mentioned the 7777 permissions are the good ones for me with the 0777 permissions it did not work for me, but I am doing well and I have been able to transfer photos without problem.
You have to take into account, once the ibluetooth.app folder is copied via winscp and you open it, you get all the files, the first three are folders, !!! eye, you have to give properties above the folder and change the permissions and then open the folder and the file inside you also have to give properties above and also change the permissions, if not, it will not work for you.
regards
I have the mobile in 2.1 all the files and folders with 7777 and it tells me that the application cannot be opened. Can someone give me a logical reason why this happens to me and what would be its solution. Thanks.
I am the same as another one I read here and ps I saw that they do not follow up on it ... I am not an iPhone expert .. I have a 2G with FW 1.1.4 ..
I had no problem with the icon, if it appeared the first time, but after the main screen of the ibluetooth it only says "loading" for 2 seconds and the application exits ... = S (I already tried with 755 and 777 and nothing !! )
Kreo ke does not work for version 1.1.4!
Hello, I already did everything they say but the program keeps telling me that it cannot be opened and I changed the permissions and nothing could help me
I have the same problem as IZ .. I have FW 2.0.1, I already installed it as TOM says from clubifone.org/repo, I have changed the permissions… but nothing. Does anyone know how to make it work? Thank you.
Another possibility is to register on the xSellize page, look for the source in Cydia and download it directly from there without modifying anything, it worked for me OK
I have the iphone in 2.0.0 and with the same problem as IZ and amyamure, they already solved that ????
Hello dears. I am a pioneer in working on the iPhone, but you start with something. The first thing I have done is try to install the iBluetooth on my 3G version 2.1 and it doesn't work for me. Can someone tell me exactly what is the path where I should put the iBluetooth.app folder on iPhone and if I should do something other than the permissions from the WinSCP. I would appreciate any help. Thanks.
I was looking for it everywhere but as this application is only for PC and Mac. ?????
hello everyone like iz I have an iphone 1.1.4 2g and it doesn't work for me
I tried to give it a 7777 but it rejects it and only leaves it in 0777, I tried it with several permissions but it could not, what can I do? because it doesn't want to work .. some help, thanks
Well, look and I have done the same steps and when I give it the ibluetooth option I get a message telling me that the application cannot be opened, it will be that someone could tell me why this happens
i have an iphone 3g
Hello, I have an 8 g iPhone, firmware 1.1.4, I connect the iPhone through WinSCP without problem, I put the files, I pass them to 0777, I restart the iPhone and when I tap on the icon that creates me on the screen , Nothing, nothing happens, it does not go to the other screenshot, someone would know what happens to my iphone or if I need to download another app, etc. I don't know why help me. Thank you. Stevens from Colombia
hello Stevens something similar happened to me, I solved it by updating my iphone to 2.2 with this tutorial https://www.actualidadiphone.com/2009/03/13/instalar-ibluetoothfull-via-ssh/
I hope I've helped
Good but I had a super problem monononononononon, since when updating to 2.2. My iPhone got damaged, that is, in 1.1.4 almost everything works for me, but when I went to 2.2 I did not know what happened and I had to lower it again to 1.1.4, but I will take your advice, also I do not believe that is the descent back to 1.1.4 as difficult as last time, thank you. I'm writing to see how it went.
I have the ipod touch with 3.0
I installed the ibluetooth from the clubiphone repository in cydia and it gives me the error
Unable to start the stack, please try restarting the application. If the problem persists, try rebooting the device
THANK YOU
But that bluetooh has made me ugly sometimes. when they go looking for me to pass something on to me they don't find me and the music cannot be saved on the ipod.
hello I have iphone 3g version 3.0 with jailbreack I did almost everything they told me but when wanting it enters the appbluetooth files to give it permission it cannot enter; and when I pay for the iphone, the application icon appears but it does not start.
hello I have version 3.0 iphone 3g I followed the steps with 7777 permissions and it worked for me thanks
Hi Juan… .in my case I have an iPhone 3GS with version 3.0 tb and I am not capable…. I have tried everything… with permissions 0755 I get the famous error message in English and with permissions 7777 it seems to open the application but It does not leave the loading and there it stays… .It does not load the application…. Anyone know if it is because the new terminal is the iphone?
by the way I forgot to comment… ..at the time they told me that it was because I had the bluetooth of the iphone disconnected… .If I go to settings and I connect it, it makes me look for devices that obviously never gets to be found and I get the bluetooth icon at battery side… ..well what I do is exit settings and the icon remains… .then I go to the application and when I give it this time what it always does is that automatically the bluetooth icon next to it disappears the battery and it takes me out of the ibluetooth application at the same time… .. I don't know what else to try !!!
hello everyone like iz I have an iphone 1.1.4 2g and it doesn't work for me
I tried to give it a 7777 but it rejects it and only leaves it in 0777, I tried it with several permissions but it could not, what can I do? because it does not want to work .. some help, I can not start k, thanks
Hello, I have an iPhone 3G with firm 3.0 and it worked for me by recursively giving 7777 permissions. But when restarting it was stuck in «Loading» as mentioned above, what I did then was to turn off and turn on the device again, and then if it started .
At the moment it works, but sometimes it hangs on "loading" when starting, and what I do is a respring and it starts again.
I hope it serves you, greetings.
Hello everyone from Medellin-Colombia. Well the question is that I just bought the new ipod touch 64 GB 3G and I would really like to know how I can transfer files via Bluetooth. Should these same steps be followed? or is there something different for this new model
I would appreciate any information you can provide me. Thanks
Hello to me, the ibluetooth did not work for me either by ssh or the one downloaded from the clubifone repo, but the one downloaded from this other repo worked for me: repo.beyouriphone.com
I hope this is useful, regards!!!
It did not work for me crist: !!!
Is the repo well annotated ???
I did not use any repo, I will try with open ssh the one from beyour only works on iphone 3g
Hello, I did everything that the manual said, but when I try to enter the application I get «Unable to star the stack, please try restarting the application. if the problem persist, try rebooting the device »can someone help me.
Hello, I have the following problem and I do not see the solution in any post
1.- I install Ibluetooth from Cydia from the xsellize repo
2.- Once installed I get in and give the permissions to the folder / applications / ibluetooth permissions 7777
3.- reboot iphone
4.- I try to start iPhone and I get “Unable to start the stack, please try restarting the application. If the problem persist, try rebooting the device "
5.- can someone help me?
Version iphone 3gs 3.1.2 32gb
Thank you
hello, I have had all the previous problems I got the error….
but my problem is the following I open the application but it remains on the main page:
ibluetooth loading… and from there it doesn't happen, why is that?
thank you anyway
Friends, I have an iPhone 3G, firmware 3.0.1, and it only worked with 7777 permissions ... none of the other options let me do anything, it gave me the STACK error or something like that ... and always remember to check the box DARPERMISSES RECURSIVELY ... blah, blah, blah in the WinSCP ... restart (preferably, turn the iPhone off and on again) and it should work ...
Hello good look I install the repo and nothing tells me that it does not find it, so why: S ... and I can not install it in any way!
Hector, make sure you didn't write clubipHone instead of clubiFone. It happened to me.
does this work with iphone 3GS 3.1.2 16gb?
Does this work on an iphone 3gs version 3.1.3 with 32gb memory?
Greetings! I have an iPhone 3G V.4.2.1 this is released and has Cydia installed, download the Ibluetooth and install it according to the tutorials that are here. Use Open Ssh and Wiscp, I left the files in 0777, when I restarted it, the application appeared but when I clicked it to start, it begins to load and suddenly disappears, nothing appears and it still does not work….
can you help me???