Jailbreak for iPhone 3G with iOS 4.0.1 now available

It only takes a few minutes available and version 4.0.1 for the iPhone 3G already has its Jailbreak thanks to redsn0w 0.9.5 beta 5. Here are the links to download the application whether you are Windows users or Mac users:

  • Mac
  • Windows

Source: iSpazio

Edito- The jailbreak process always carries a risk. The tool is perfectly functional for version 4.0.1 and an iPhone 3G. If an error occurs during the jailbreak, ActualidadiPhone is not responsible since we only try to provide you with the information in a timely manner, nothing more.


Follow us on Google News

125 comments, leave yours

Leave a Comment

Your email address will not be published. Required fields are marked with *

*

*

  1. Responsible for the data: AB Internet Networks 2008 SL
  2. Purpose of the data: Control SPAM, comment management.
  3. Legitimation: Your consent
  4. Communication of the data: The data will not be communicated to third parties except by legal obligation.
  5. Data storage: Database hosted by Occentus Networks (EU)
  6. Rights: At any time you can limit, recover and delete your information.

  1.   dSK said

    I have an iphone 3g with the jaibreak I need to restore it to do it with this ios or can I use the backup?

  2.   nachooo said

    This new version is also unlockable ???? or upgrade to a new baseband ??? to leave them again blocked?

  3.   Lolo said

    And so much. I'm biting my nails until I jail for 3gs and every time I open the blog and see jailbreak my heart leaps so that finally it will always be for 3g. Thank you a lot to all the k ace the jail possible. But we need jail 3gs now !!!

  4.   elpumpy said

    I support what happened with the 3gs and take out for God!

  5.   adrian said

    They should stop supporting 3G and only give it for 3Gs and 4.

    If they don't have the money to buy the new one, it's not our fault.

  6.   mrdan03 said

    Since then Adrian, they have me with the 3g and the edge to the hilt!

  7.   adri said

    Does ultrasn0w work with this update?

  8.   Luar said

    Smell the balls from the last two comments on 3G support. Well, those of us who don't have money to buy a 3gs can you leave it to us, right?
    A little kiss.

  9.   adrian said

    No thanks, each with their things.

  10.   camilo said

    who is the person who is in charge of these publications just tried to jailbreak, trusting me with the security of this page and a fiasco has resulted…. The jailbreak for any iPhone 4.0.1 is not free yet, but on the official twitter they say not to update ... ps I have stayed with an ibrick thanks to you. more seriousness please

  11.   Microsoft said

    Congratulations Camilo Sesto, how lucky you are.

  12.   sitanglo said

    It seems incredible to me that if you do not know how to jailbreak, blame yourself with your comments to the best iphone website, the jailbreak works perfectly on an iphone 3g

  13.   dnages said

    I think it's great that the jailbreak came out so soon, but my question is if the ultrasnow 0.93 works and so I can release it?

    I await your answers… Thank you !!!

  14.   nacho said

    Camilo, I'm sorry about what happened to you, but you had to do something wrong. The 0.9.5b5 version of redsn0w even allows you to jailbreak version 4.1 of the beta released today and works perfectly for 4.0.1 of an iPhone 3G. Ah, I forget to tell you that at no time is it said that the jailbreak is for any iPhone, it is only for the 3G, of course the title says so.

  15.   Albo addicted said

    I wonder… ..with this Jailbreak when it is for 3GS, we can install 4.0.1 from iTunes and then run this reds0ws and that's it?
    Or will we have to do it every time we reboot?

    The other thing that I was wondering… .Will the new and old Bootrom work on the 3GS? If so, we will be tied to the cable.

    Regards,

  16.   Luis Antonio said

    And does the ultrasn0w work with this version?

  17.   Albo addicted said

    Do we have to have something backed up? …… those who have already done it in 3G tell us that it is necessary, to be attentive to 3GS.

    Regards,

  18.   jacob said

    It is necessary to update the 3G to 4.0.1 and later apply it in jailbreak or, on the contrary, it can be applied with 4.0.1 directly without having to update it previously.

    Salu2

  19.   Raul_GP said

    Hello,

    I have downloaded redsnow from the link, but when I browse and look for the original firm (the one saved in the folder uauario-Libreria-iTunes-iPhone Software Updates, I get the error: «Unable to Recognize Specific IPSW». Do I need to download Any special signature? Is the original invalid?

    I have a 3G and I just restored it (and 4.0.1 was installed). It works ok but I have lost the jailbreak

    Thank you so much for your help

  20.   wamms said

    @adrian: Well, you don't know what I'm glad I didn't buy the 3GS, I'm still happy with my 3G and on top of that they take out the jailbreak before ...
    yes, when I arrive I will try to get the 4 (if it no longer has problems), but I do not think I am the typical donkey that buys everything new every year ...

    I'm going to try the jailbreak and I'll tell you something ...

  21.   explode him said

    lolo we are with you…. take out the jailllllllllllllllllllll for the 3gs god mioooooooooooooooooooo for queeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

  22.   servesa said

    I have the same problem as Raul GP. What can we do? With how happy I was ... and now it's not going !! What can we do???

  23.   servesa said

    It is already solved. When you update to 4.01 later to redsn0w you do not have to give it the 4.0.1 firm but the 4.0 one that can be downloaded from various sites. So working perfect. Luck!!! and it really works

  24.   Luis Antonio said

    But did the ultras0w work for you?

  25.   adri said

    Does the ultrasn0w work on 4.0.1?
    thanks!

  26.   jesus said

    I have an iPhone 3g and it is luxurious, before I had it in 4.0 and it was very slow, with 4.01 it is much faster. eye only for 3g. Those of you who have an iPhone 3GS have to wait for the update to come out in a few days.
    I tell you how I did it.
    You only need to download the. REDSNOW-WIN-9.9.5B5-ZIP AND FOR JAILBREAK DOWNLOAD
    THE IPHONE VERSION 1.2-4.0-8A293 IPSW ..
    I am delighted with the new version. I now have the iphone with the version
    4.0.1 (8A306) and firmware modeden 05.13.04.
    THANK YOU VERY MUCH FOR ALL THE INFORMATION. GREETINGS

  27.   okercho said

    As I have read, the Baseband does not change, so the ultrasn0w should work… I am recharging my iPhone to update… I will keep my fingers crossed!

  28.   frankerbus said

    ULTRASNOW !!! pull or no pull ??????????????????????????????????????????? ???

  29.   frankerbus said

    this means that in a little while the jail and unlock for iphone 4 😉 (it is what I was waiting for comex and musclenerd)

  30.   wamms said

    I don't know if it pulls or not pulls the ultrasnow, I don't need to release it!
    But the redsn0w has worked perfect for me ...

  31.   adrian said

    now I tell you if it goes…. I have taken a risk xDDD

  32.   frankrebus said

    the ultrasn0w if it goes.
    but curious thing.
    you install 4.0.1 you pass redsnow
    you connect to wifi
    you update the cydia
    you install redsn0w
    device reboots and wifi network hangs
    need to reset network settings
    and then everything is fine

    just that little detail so they don't get scared.
    (There are 2 that do the same to me)
    END

  33.   adrian said

    if it goes ultrasn0w, the phone is going very fast now (3G) until I have encouraged myself to activate the wallpaper, I have noticed an improvement in the wifi and I notice the bars of the phone signal a little strange, it will be my thing ... xDD
    All very well and very fast !!!!!

  34.   okercho said

    I confirm that the UltraSnow goes, and the first impressions (before restoring) with the active multitasking is that it goes quite well. He is still restoring my crap, so I don't know how it will have been, but I remain hopeful xD

    Regards!

  35.   frankrebus said

    Right now I will tell you if the appsync for the ios4 is going (I imagine that when this goes, they will not think about it) but I will tell you in a moment

  36.   eGarOv said

    Downloading… but it's slow… 2 hours left… = Y

  37.   frankrebus said

    CONFIRMED appsync for iOS 4.x works on iOS 4.0.1 xD so if you have a 3g GIVE IT !!!

  38.   nite life said

    Hello! Can you tell me the steps to follow to do it correctly? Thanks!

  39.   nelvin said

    Nachoo…. that doesn't work !!!! i have an iphone 3G and it doesn't work .. it says: unable to recognize IPSW. Oseaaa .. that does not recognize it ... RECOMMENDATION !!!! DO NOT GIVE UPDATE UNTIL A COMPATIBLE TOOL IS COMPATIBLE !!!!!

  40.   javi said

    I give the download link and it tells me that this site has exceeded the bandwidth….

  41.   silver said

    Nevin,

    Update to 4.0.1 from itunes.
    Once you have it updated, open reds0w and select firmware 4.0 and not 4.0.1 and follow the steps of the program.
    Apparently the jailbreak is done from version 4 final.

    It is what he puts in all the forums.

    regards

  42.   nelvin said

    silver
    minutes before reading what you had written .. I had already done it, but anyway .. thank you very much.

    SALU2

  43.   Alex said

    I just updated my 3G to 4.01 and I can attest that the improvement is more than remarkable.

  44.   Passanlu said

    redsn0w 0.9.5 beta 5 is the same as previously used for firmware 4.0?

  45.   Cristián said

    Hello, very good news, I congratulate you. Take advantage of asking about the Jailbreak for the 3GS with IOS 4 from ITunes, does anyone know something, since they only announced it?
    Thank you very much.
    Your rating: 0 0

  46.   javivi said

    Wenas, I wanted to ask you if you could put an alternative download link, since I'm trying to download it, but it says that the bandwidth has been exceeded ..: S
    I use windows and I am updating it now, but I cannot download the redsn0w ...

  47.   javivi said

    By the way Pasanlu, don't pay too much attention to me, but I think it's not the same, because this is 0.9.5b5-5 (according to the image) and the one of ios4.0 was 0.9.5b5-3 (I just looked at it on my computer)

    Waiting to be able to download the new one that won't let me…. : S

  48.   frankrebus said

    honestly the 4.xx does not get along with the 3g better leave them in 3.xx the phone is encouraged too much

  49.   frankrebus said

    @javivi the program has already been released for two weeks before 4.0.1 came out. You can find it on many sides of the web just put the name in google 😉

  50.   fernando90 said

    the redsn0w 0.9.5 does not recognize the firmware 4.0, if someone can give me a hand, I have done everything right I download the iPhone1,2_4.0_8A293_Restore.ipsw, but redsn0w does not recognize it

  51.   fernando90 said

    I do not know if it will be the windos 7 x64, but I update and I can not perform the jailbreak I have tried several times and nothing, if someone could give me a little help

  52.   ggv said

    If it is win 7 x64 we suffer the same! 😉

  53.   Frankerebus said

    Hey those of the windos 7 x64 do not have to have problems check your version of iTunes

  54.   diego said

    and if i have an iphone 3gs?

  55.   manuel said

    I have a 16g iphone, first I raised it to version 3.1.3. I could never unlock it so that it takes the signal but if I used it as an ipood., now I raised it to 4.0.1 and the resnow did not unlock it for me that now I don't know what to do wr and tried cosi with all the custon ... help me..p

  56.   manuel said

    lo0lz

  57.   frankrebus said

    .

    .

    @ fernando90. eye has to be redsnow 0.9.5. b 5-5
    use the links in the post if they work.
    the hack works perfectly in any windows os you do not have to have problems with your win7 x64 check that you have itunes in 9.x installed
    check that you enter the dfu mode correctly when the software asks you to
    check that your iphone is actually a 3G
    check that you select 4.0 when browsing from redsnow

    @Diego x at the moment there is no ssolcuion for 3gs if you are in 4.0 and without saved shsh
    THIS TUTOERIAL IS FOR 3G

    @Manuel «are you sure it's a 3G ????
    ah the best is a 3GS….
    check the procedure well

    END

    .
    ,

  58.   Caesar Salad said

    I have the same problem that Fernando does not recognize the ispw

  59.   mcatta said

    The ispw 4.0.1 does not recognize me either, with 4.0 everything worked ok

  60.   toni said

    but don't you realize that this program doesn't work for 4.01?

  61.   toni said

    What's more, you just have to see that it is the same version as the one used to correct the problems in 4.0.

    there is currently nothing to jailbreak IOS 4.0.1 and if there is, I want proof that it works.

  62.   toni said

    the only thing that can be done is a botch, which they have not bothered to explain, and is restoring the IOS 4.0.1 from iTunes and later "patch" with the jailbreak of the IOS 4.0, and see if it works ...

    Personally, I wait for 4.1 to come out and it is all functional ... lest we "screw it up"

    PS: before publishing anything, take a good look at the way of doing things ...

  63.   IPHONE-FOR-ALL said

    with good afternoon greetings ... and this IOS runs better than the previous 4.0 ?? Will it be worth uploading it to 4.0.1? and do the respective jailbreak?

  64.   alligator said

    To do the jb first enter itune and update second when it is updated in any case to make the jb with the redsnow gives a compatibility problem with 4.01 which has to be put in the redsnow the firm 4.0 and with that they will update it afterwards enter cydia if you have a problem turn off the iphone and turn it on and again enter cydia and look for Ultrasn0w and install it if there is a problem install it again and it will be released

  65.   alligator said

    and then give thankssssssssss

  66.   Daniel said

    It doesn't happen to me from "waiting for reboot" it doesn't happen from there, why? What happens!? did I do something wrong !?

  67.   Daniel said

    Done it is Jailbreakeado but the ultrasn0w does not work for me !!!

  68.   croxz said

    I have the same problem, the »iPhone1,2_4.0_8A293_Restore does not recognize me»
    I have window view and it is not recognized by X_X
    If anyone has any answer plox k say D:

  69.   Gabo said

    Hey, I have an iPod Touch 3G MC, 64 GB and with updated iOS4! How do I Jailbreak it ?????

  70.   Miguelon said

    My redsnow does not recognize the ipsw file, I browse it and it tells me that the firmware is not correct…. I do everything right but until that moment on redsnow nothing happens to me ... I would like to know what problem I have because the network does not recognize the firmware 4.0

  71.   manuel said

    I have tried to update the firmawere first but itune tells me that it will verify the restoration with appel and then it gives me an error 3194 that cannot be restored, which I do, thank you

  72.   Marco said

    I did it with redsnow 0.9.5. b 5-3 and I have a 3G with version 4.0, I used the iPhone1,2_4.0_8A293_Restore.ipsw and I did the JB in 1 minute, it works perfect.

  73.   Alex said

    Not even in mac it works that pod that make a pod well does not recognize the blessed firmaware

  74.   mack1206 said

    what kind of wave ps I am only going to leave my mail x if you have any problem about any movement or hack the iphon ok good

    mack_120689@hotmail.com

  75.   kmilomac107 said

    Hello …. I also have the same problem I download the network for mac and download os 4.0 directly from itunes but when I give it in a web browser and it bites the ipsw it says that it is not valid I need help since I tried in several ways and I could not Another page I saw that you can no longer downgrade even an iPhone / iPod, and once you have installed OS 4.0

  76.   MILD said

    HELLO….
    LIKE MANY OF YOU, THE REDSN0W 0.9.5 DIDN'T WORK FOR ME STILL I DON'T UNDERSTAND WHY IT WORKS ON SOMEONE AND IT DOESN'T WORK ON OTHERS ... I WILL RISE SO THAT THEY STOP SUFFERING… BE CAREFUL….

  77.   jordi said

    SOLUTION FOR REDSNOW AL BROWSEAR
    iphone 3g 4.0.1 winxp
    THERE IS K TO USE:
    -reasnow win 0.9.5b5-3
    -EYE!!! ios iPhone1,2_4.0_8A293_Restore downloading to desktop

    ps: I make this conclusion after trying many redsnow conversions

  78.   MILD said

    AND IT REALLY WORKED FOR YOU…?… I'LL TRY TO HAVE…! .. AND LATER I WILL COMMENT ABOUT IT… THANK YOU

  79.   Victor said

    Where can I download redsnow 0.9.5. b 5-3?

  80.   frankrebus said

    here is published the redsnow you need!
    this is for windows works with any existing windows ...
    http://sites.google.com/a/iphone-dev.com/files/home/redsn0w_win_0.9.5b5-5.zip?attredirects=0

  81.   MILD said

    HELLO EVERYONE…
    THE TRUTH I HAVE TESTED THIS ONE AND EVERYONE WHO HAS COME OUT UP TO NOW AND NEVER READS ME THE FW ..... I HAVE FOLLOWED AT THE FOOT OF THE LETTER ALL THE STEPS AND NOTHING ... hehehe ... BECAUSE THE TRUTH DOES NOT LOAD ANYTHING AT THE ABSLUTE ....
    WHAT I DON'T UNDERSTAND IS BECAUSE IT DOESN'T SERVE SOME AND OTHERS ... BUT GOOD ...! ...
    IT WILL CONTINUE WAITING TO HAVE WHAT RESULTS ... HUG TO ALL ... AND PASCIENCIA ...

  82.   Luis said

    Of course it works but download the firmware from another page since there are some in the k they do not work I have win 7

  83.   Dei-bit said

    I have done several in this way, first I load the official firm 4.0.1 and do jail selecting the official firm 4.0 and it has been without problems, the only thing is that I have noticed that YouTube marks an error but if it plays the videos from there entering through other pages, this is in 3G I have not tried it in 3GS, it seems to me that there are no

  84.   MILD said

    HELLO…!
    MAYBE SO SOON AND IT IS POSSIBLE THAT YOU ARE RIGHT IN SAYING THAT THE FW I HAVE DOWNLOADED ARE NOT THE OFFICIALS ... IF THEY KNOW OF A PAGE WHERE YOU CAN DOWNLOAD THE OFFICIAL FW 4.0 ... I THANK YOU, AND SO LOOK AT HAPPENING WITHOUT THE MOMENT I CAN HACK IPHONE.
    ANOTHER THING, THE YOUTUBE ERROR IS NORMAL, MAYBE IT IS PROBLEM WITH REDSN0W, BECAUSE IN VERSION 4.0 THIS PROBLEM IS GOING OUT BUT ONLY IN SOME NOT IN ALL…. THE REASON IS STILL KNOW IT..WELL…!… I'M ON WAITING… PLEASE POST A LINK TO DOWNLOAD THE OFFICIAL VERSION OF FW 4.0….
    BYE

  85.   sebaush78 said

    I have an iphone 3g 8gb from at & t and I have it with 4.0.1 and I want to free it to use with movistar Argentina I want to use this program and no firmware recognizes me with either 4.0 or 4.0.1 someone can throw me an idea that I can do thanks

  86.   eliguano said

    I normally update the iphone to 4.0.1 as the redsnow does not recognize the firmware 4.0.1 I wanted to downgrade to 4.0 so I used this redsnow and it worked I turn on my iphone I check my firmware and it says 4.0.1

  87.   JDFSYSTEMS said

    GOOD thank God I use my equipment with the operator to which it belongs. thinking that I could jailbreak an iPhone 3G. I restored to 4.0.1 and redsnow beta 5-5 does not recognize me ios 4.0.1 the 4.0 yes but the other one does not. I'm going to see if I can patch the 4.0. or someone explain to me how to degrade. please.

  88.   VICTOR said

    Hello, I have the same problem, I already look for the FW of several pages and download it as .ZIP and not as .PSW, but when opening the ZIP the file that has .PSW does not come.
    Do you know anywhere that I can download it other than .ZIP?

  89.   sergio said

    open it as zip, go to file, save a copy as: and put .ipsw i ready
    after reading I read it recently
    luck

  90.   sergio said

    Hello, with a 3GS it remains in waiting for reboot and it does not go from there, like Daniel's comment above, does anyone know how to get out of there?
    Thank you

  91.   VICTOR said

    Thank you very much SERGIO, but I do not know if I did not understand, to the file that I downloaded, I only change the extension from .ZIP to .IPSW but it does not recognize it, if I open the .ZIP file it will open a folder with a good number of documents but none has .IPSW

  92.   Diego said

    Good afternoon guys, I'm jailbreak an iPhone updated with version 4.0.1, I tell you that with redsn0w 9.5.5 I did not recognize the ipsw 4.0 or 4.0.1 I had to download version 9.5.1 from redsn0w Then I will tell you how the jailbreak was in process. Greetings

  93.   Diego said

    Well something weird happened, I did not take the jailbreak, I did the whole process as if it were that I did the jail but I left my iPhone in "emergency call only", does anyone know why?

  94.   Enter your name ... Dei-bit said

    If they download a signature that is in .zip, what they have to do is change the extension to .ipsw but they have to change the options in the window to be able to see the file extensions, it is a box.

  95.   Joshua Carballo said

    Hi everyone, look at me, I tried to jailbreak my iphone but the redsnow is not done, it loads the firmware 4.0 correctly and it does everything correctly, but in the end, when an image of a hard disk appears on the iphone and it says donwloading jailbreak or something So there is no delay like 10 minutes like this and if there is, it turns off, someone could help me with that problem

  96.   kmilomac107 said

    HELLO IT'S ME AGAIN TODAY I BRING YOU A SOLUTION TO ALL YOUR PROBLEMS A little while ago THEY PUBLISHED A WEB PAGE TO INSTALL CYDIA WITHOUT THE NEED OF CABLES OR ANYTHING GOOD I EXPLAIN TO YOU THE STEPS TO FOLLOW ARE:

    -HOW WIFI OR 3G NETWORK
    -ONLY WORKS ON IOS 4.0 AND 4.0.1

    1- THEY GET TO SAFARI THEY GO TO THE FOLLOWING ADDRESS: http://www.jailbreackme.modimy.com (IF YOU DO NOT ENTER, WAIT 5 EXACT MINUTES AND RELOAD THE PAGE)

    2-WHEN YOU HAVE LOADED THE PAGE AT THE BOTTOM, A BUTTON APPEARS THAT YOU HAVE TO SLIDE TO MAKE THE JAILBREAK. ITS DONE

    3-GET OUT AND YOU WILL ALREADY HAVE YOUR IPOD / IPHONE RELEASED

    FOR THOSE WHO USE IPHONE IN CYDIA THE SOURCES ALREADY COMES TO RELEASE IT TO ANY OPERATOR THEY LOOK FOR IT IS ULTRASN0W »IT IS ZERO NOT ONE OR» THEY INSTALL IT THE IPHONE IS REBOOTED AND I AM READY RELEASED.

    this method works for all iphone and ipod regardless of model
    TESTED ON IPOD TOUCH 3G 8GB MODEL MC AND ON IPHONE 3G 8GB MODEL MB

  97.   kmilomac107 said

    HELLO Q PENALTY IS ONLY TO REMEMBER Q ONLY SERVES IN IOS 4.0 AND 4.0.1
    COMMENT IF IT WORKS 😛
    THIS METHOD I TESTED IT YESTERDAY AND IT WORKS 100%

  98.   kmilomac107 said

    HELLO JUST WATCHED AGAIN AND IT IS AVAILABLE FOR 3.XX AND 4.XX
    SORRY FOR MISTAKES

  99.   kmilomac107 said

    HEY ANOTHER THING THAT ESCAPES ME IT ALSO USES FOR THE IPAD 😛

  100.   kmilomac107 said

    HEY ANOTHER THING, Q IS IT ALSO USED FOR THE GREAT IPAD?: P

  101.   I lever said

    Yes sir I tried it…. in fact I was ahead of time to publish it .. but it works wonderfully for all the iphone 2g, 3g, 3gs and of course the 4g ... so let's enjoy friends ... this week snoebreeze 2.0 also comes out for the end, which also does the same ...
    Well, greetings to everyone and enjoy it ...

  102.   kmilomac107 said

    hey LEVERO what a shame but ps I think it was an obligation on my part to put this on the page so that everyone can do the jailbreak since problems have been presented with traditional forms

  103.   VICTOR said

    kmilomac107 WOOOWWWW the wireless method works perfect and I don't have to be downloading thousands of programs or the .ipsw programs that I could never download, it works for me on a 3g, thank you very much!

  104.   kmilomac107 said

    IF VICTOR IS A GOOD OPTION THE ONE ON THE WEB PAGE. A QUESTION WHAT IS YOUR IPHONE / IPOD INSTALLED?

  105.   MILD said

    kmilomac107, I DON'T KNOW WHAT YOU MEAN… BUT AHA…!
    THE PAGE IS: jailbreakme.com. They open it from safary and the chicken is ready ...
    enjoy it…

  106.   Enter Tuchotu name ... said

    Hello:
    I'm using Imstallous 2.0.4, but I can't download any applications anymore. I'm using I Tunes 3.0.1, I haven't updated it for fear of losing the jailbreak on my iPhone. My question is: should I first update to version 4.0.1 on I Tunes? Thank you so much for your help

  107.   MILD said

    DON'T worry, when updating your itunes you will not lose your jailbreak unless you do it ...
    itune gives you the option of only downloading the latest version of FW, then click there ...
    Likewise, the FW 4.0.1 jailbreak is available so you don't have to worry

  108.   Luis said

    Hi, I'm new to this, if I update my iphone to this version, I can put the blueto and all the applications with the sidya

  109.   samuel said

    How is the application installed? Thank you very much

  110.   Moses said

    Hello everyone, you can do it and unlock the iPhone 3GS 3G iPad and iPhone 4G without having to connect it to a computer, just by accessing the Internet from the iPod, you can jailbreak if you want to know how my email is moisesito_8@hotmail.com

    It is not 100% real choro but try the page from an iphone 3g http://www.jailbreakme.com ledan where it says jailbrakc and ready your ipod iphone ipad with os op fimeware 4.0 or 4.0.1 is released with cydia

  111.   land said

    Hi there..!!! My iPhone 3GS is on an emergency call after I installed 4.0.1. Can someone help me please .. !!! How do I unlock it ??? = (

  112.   MILD said

    SIMPLE TANY ...
    THE FIRST THING IS TO KNOW WHICH OPERATOR YOUR CEL IS AFFILIATED TO… YOU PUT THE SIM OF THAT OPERATOR AND THEN SYNCORNIZE IT WITH ITUNES SO IT CAN ACTIVATE THE IPHONE… THEN FROM CYDIA YOU DOWNLOAD ULTRASN0W TO BE ABLE TO RELEASE THE IPHONE AND IT'S READY IT IS NO MORE… CHAUUU
    REMEMBER TO CLICK THE FIST WITH FINGER ABOVE .... BLESSINGS TO ALL

  113.   daughter-in-law17 said

    Hi Tany if you can put a Chip from an authorized operator, you open the safari you write jailbreakme.com to him mdas slide jailbreak he mounts the cydia, you open cydia and after updating it you go to ultrasn0w, the phone is reset and you already have your phone unlocked , and if you don't have to do it through redsn0w

  114.   JonathanMX said

    Greetings from Mexico, I have a legal 3G iPhone from an authorized Telcel operator, it is updated to version 4.0.1 with, I used to enter the jailbreakme.com page, did I install the cydia? is that I want to put themes and ringtones on my iphone ………… .. greetings

  115.   LEVERO ... said

    Exactly ... From one you install cydia and from cydia you can install the App sync for 4.0.x and other applications. Enjoy it…!

  116.   donosti said

    I have an iphone 3gs with version 4.0.2, it is released by IMEI.
    could I put the cydia in some way? since from the jailbreakme.com page it does not let me.
    thanks in advance and greetings to all.

  117.   kmilomac107 said

    hey donosti I think you screwed up by uploading it to version 4.0.2 since that version does not allow the page to do its thing, you have to downgrade the software

  118.   MILD said

    hehehe ÑERDA LOCO LA CAGO CON GANAS OLD DONOSTI… ..BUT YOU HAVE SALVATION…. YOU HAVE TO MAKE HIM A DOWNGRADE…!…. IT'S EASY YOU JUST HAVE TO LOOK FOR THE FW 4.0.1, PUT THE iPHONE IN DFU CONTROL MODE AND THEN PRESS FROM IT YOU PRESS AND YOU LOOK FOR THE Q VERSION DOWNLOADED AND READY RETURN TO THE PREVIOUS VERSION WHICH CAN BE HACKED FROM THE PAGE.
    BY THE COURSE IF YOU HAVE A 3GS THE DOWNGRADE PROCESS HAS SOME VARIATIONS… LOOK FOR THEM…!… .LUCKY MIJO…!

  119.   willtor said

    Hello, I have a question, I hope someone can help me. I do not know what to do…

    I have bought an iphone 3gs with firm 4.0.1 with jailbreak.

    I have tried to install the version of itunes 8 (it gave me problems) version 9 also problems and in 9.1 when I manage to install it and connect the iphone by usb:

    It tells me that I have to install version 9.2 at least. What I do?

    From what I have read the version of itunes 9.2 came out on July 16, 2010 and firmware 4.0.1 (the one I have) came out on July 15, 2010….

    Thanks for your help!

    Load ""

  120.   kmilomac107 said

    Hahaha willtor then oviamnte you have to install version 9.2 of itunes which is the one they ask if you have signature 4.0 on any device ps I recommend version 10 of itunes came out recently and it is better than all look for it and download it original from the page of apple luck any other question question 😀

  121.   ipodtouch3g said

    well I can't use it

  122.   Thingy said

    in that way? If I want to unlock my iPhone 3g, I just have to go to the jailbreak page and that's it? or how is the thing? Another thing, how do I know if my iPhone is version 4.0.1? is the same 4.1?

  123.   jose said

    Hello, I ran the program and when I have been pressed for 3 seconds with the 2 buttons I can hear a sound then when there are 25 seconds to complete the process I smell an unpleasant sound that I assume is indicating that it has not entered mel dfu mode. What can I do, since I can't unlock my iPhone

  124.   MILD said

    HELLO FRIENDS….
    ANYONE OF YOU KNOWS WHAT iDEVICE IS AND WHAT IT IS FOR OR HOW IT WORKS ...

  125.   Paulito, Alejito said

    HELLO FIRST MY CORDIAL GREETINGS AND CONGRATULATIONS X WHAT DO YOU DO AND PS THE ONLY THING I WANTED TO KNOW IS IF YOU COULD ASSIST ME IN THE PERSONALIZATION OF THE Iphone PERSONALLY since I HAVE JUST PURCHASED IT AND IT IS 3GS 4.0.1 AND I DON'T KNOW IF IT WORKS ALL THE NEW Q 'OFFERS IN CUSTOMIZATION
    MY FEAR OF NOT DOING IT MYSELF IS THAT THE CELL WILL DAMAGE OR MISCONFIGURE THEN X THAT I ASK FOR HELP I HOPE SOME ANSWER AND TB I WANTED TO KNOW IF THE OPERATOR DOES NOT MATTER WITH THE Q 'DOES THE CELL XQ WORK MINE IS (CLEAR) AND PS I WAIT FOR AN ASSISTANCE TO BE ABLE TO USE ALL THE FUNCTIONS WHETHER CYDIA OR JAILBREAK
    THANK YOU AND I WAIT FOR A RESPONSE AND ASSISTANCE