Tutorial: Jailbreak with Custom Firmware 3.1.3 (modified) for iPhone 3G

This is a tutorial to install a Firmware(Custom), modified by me, with sn0wbreeze v1.3 in a iPhone 3G.

In this way, when you have it installed, it will already be with the Jailbreak made.

It does not upload the Baseband, it will keep the 3.1.3 firmware with the 3.1.2 Baseband: the "05.11.07".

Before doing anything you should read these considerations of the Devt about him jailbreak in the Firmware 3.1.3:

Fimware 3.1.3 Jailbreak on iPhone and iPod Touch

IMPORTANT NOTE:

For those who have an iPhone 3G with a Baseband equal to or lower than 04.26.08, I would advise not to upload this Firmware, to have better future prospects, apart from the fact that this firmware does not introduce much improvement.

Requirements

Have installed the iTunes 9.0.3

If it is not installed, update the iTunes directly or download it from the page Apple Lossless Audio CODEC (ALAC), from here and then install it:

iTunes 9.0.3 for Windows

iTunes 9.0.3 for Mac

Download the custom Firmware (Modified):

AT - FREE iPhones (Italians ...) and those who use the OFFICIAL operator purchase of the iPhone (Example in Spain, Movistar ...).

sn0wbreeze_v1.3_OS3.1.3_berllin_iPhone 3G_NO_ACTIVATED.ipsw

B - iPhones that use a different sim card to the official iPhone purchase operator.

At the moment there is no liberation!, so it will be blocked: DO NOT INSTALL, that's why I do not put the link lest someone install it.

sn0wbreeze_v1.3_OS3.1.3_berllin_iPhone 3G_ACTIVATED.ipsw

We start

Make a "Backup" for example with PKGBackup previously downloaded from Cydia, in order to later recover the applications that were from Cydia.

Open itunes.

Connect the iPhone and synchronize the iPhone with iTunes to later recover the contacts, calendar, applications from the Apple Store ..., and the backup copy of the Cydia applications that is saved as a contact.

Tighten the shift key (in Windows) at the same time as the key "Restore" on iTunes. The shift key is represented by an outlined arrow pointing up (⇧).

Tighten the Alt key (for Mac) at the same time as the key "Restore" on iTunes.

A window will appear to search for the Firmware Custom 3.1.3 that has been downloaded, is selected and the restoration begins.

When finished, you are already in Firmware 3.1.3 with the Jalbreak done.

Now,

Synchronize with Itunes and recover contacts, calendar, applications ..., from the Apple Store

Open Cydia, update Cydia installer and Install PKGBackup to recover Cydia applications with a "Restore"This will take a while and will depend on the number of applications installed.

Most frequent problems that can happen in the installation

1st - Errors 16XX, 23 ...

These errors are caused by problems with the USB ports of computers

Solutions

Change USB port on computer

Change computer

Pass it IREB at the time of the error: Download IREB

2nd - Locking the iPhone of any kind

Put iPhone in DFU Mode and start over

DFU mode


Follow us on Google News

101 comments, leave yours

Leave a Comment

Your email address will not be published. Required fields are marked with *

*

*

  1. Responsible for the data: AB Internet Networks 2008 SL
  2. Purpose of the data: Control SPAM, comment management.
  3. Legitimation: Your consent
  4. Communication of the data: The data will not be communicated to third parties except by legal obligation.
  5. Data storage: Database hosted by Occentus Networks (EU)
  6. Rights: At any time you can limit, recover and delete your information.

  1.   Elio Parra said

    Berllin if I install this firmware I have no problem then to unlock it with blacksn0w? I currently have a 3G with 3.1.2 with jalibreak

  2.   Elio Parra said

    Another thing when I go to download the firmware by megaupload it tells me that it is firmware 3.1.2 7D11? Is the firmware 3.1.2 or is it the custom 3.1.3?

  3.   juanpars said

    I have already done the whole process and I confirm that it has been unlocked and jailbroken ... but ... how do I allow any SIM to release it?

  4.   jesusp said

    @ top: berllin said:… »iPhones that use a different SIM card than the official iPhone purchase operator.

    At the moment there is no release !, so it will be blocked: DO NOT INSTALL »...

    @ berllin:… »For those who have an iPhone 3G with a Baseband equal to or lower than 04.26.08, I would advise not to upgrade to this Firmware, to have better future prospects, apart from the fact that this firmware does not introduce much improvement." ...

    I had that bb, with firm 3.0.1, and one day before 3.1.3 came out I updated to 3.1.2 which raised the bb to 05.11.07… Was I wrong to do this?

    Greetings 😉

  5.   cellusafe said

    Hello, I wanted to get on baseband, because I do not need to release my mobile since it is legal, the fact is that I downloaded redsn0w last version to do the JAIL to 3.1.3 and well, I updated normal via direct ITUNES, my big surprise when He left me my IPHONE 3G updated to 3.1.3 and I DID NOT DELETE ANYTHING, no photos, no music, no contacts, no applications, NOTHING personal, only CYDIA deleted me and what had downloaded from it, yes, the pirated applications They did not open me, while the legal ones were normal, well, I passed it through redsn0w for the JAIL and after I recovered cydia now if the pirated applications were working and everything was perfect, updated in 15 minutes to 3.1.3 without losing applications or anything, wooowww ... the case was that I installed atpbackup to recover my cydia apps and it returned them to me but TOOOODASSS deleted the apps from the appstore: S: S
    so now I'm syncing apps again, but it seemed great to not have to install settings again, neither music nor information nor ANYTHING.

    3.1.3 runs normal, very fluid and so far I have not had problems or bugs.

    greetings.

    CELUSAFE.INC

  6.   flea said

    Well, nothing said what was said, I continue to stay with my firm custom of 3.1.2 and based on 4.28 ... updating to 3.1.3, it will not mean any improvement so I stay as I have it and that's it ....

    anyway thank you Berlin for always working on it.

  7.   f00Se said

    Good friends, help: I ​​have an iPhone 3GS (Italian), an AMD pc with Windows 7 ultimate 64bits, freshly formatted with everything working fine, I create the custom 3.1.3 firmware all fine, but when restoring with my latest version of iTunes always gives the problem 1600 because it says that the USB port is not 2.0 and I already use 3 different cables in all the 8 USB ports, apart from that I have a MacBook Pro and in its ports it gives the same error 1600, I realized that iTunes recognizes the firmware custom and sends that error because when I use a legal firmware it passes the update or restoration correctly, the iReb does not work for me now I do not know if it is due to the win7-64b and the iTunes64.
    My iPhone is working legal but original in 3.1.3 restored by iTunes.
    I have Italian 3G and if everything works fine to 3.1.3 with all and Baseband update.

    All I want is to know if someone with an old Italian iboot iPhone 3GS has been able to mount the jailbreaked 3.1.3.
    Thank you for your help.

  8.   Carlos said

    Friends this is my first comment I have been following this page for a long time now I hope to get a solution to this little problem, I made the update 3.1.3 and the jal ... I installed the installad pach from the cydia and it is not compatible with 3.1.3 .XNUMX MY QUESTION IS HOW TO INSTALL THE CRACK APPS ON THE IPHONE!

  9.   cellusafe said

    look CARLOS, you must install APPSYNC for 3.1 you get it with the beyouriphone repo or with the hackulo, greetings.

  10.   iPhone all said

    With good afternoon from VENEZUELA friends, this page has been a great wonder indeed, and I hope to leave you contributions also, either indirectly or directly, in order to form the website and with the best efficiency in the world.

    Carlos friend to put cracked applications on iPhone you must install a patch.
    open cydia let it load
    go to manage, sources you give above edit and write http://iphone.org.hk/apt/
    then press add sources when finished press done
    at the end you will go to search and write installd patch

  11.   iPhone all said

    And you will install the patch, your iPhones will be ready to put crack applications on your iTunes, you just have to download at least one free application. The page from where you will download the applications is:
    http://appulo.us/appdb/
    the key is CAVERN

  12.   Carlos said

    Thank you very much celusafe and iPhone for all for your prompt response, I will tell you that none of the options that they offered me worked for me since these are not compatible with version 3.1.3 THANK YOU VERY MUCH I hope someone can help me !!

  13.   satgi said

    It is not for nothing but I have downloaded the custom firm from your megaupload link and it turns out to be 3.1.2… .. I noticed when it was restored…. U_U damn ... .. k was not supposed to be 3.1.3?

  14.   fco chunk said

    berllin I have 3gs new mc I can do this tuto ,, thanks and greetings ,,,

  15.   Ruben said

    Hello, I have a question, I have an iPhone 3GS with 3.1.2 Movistar, I have jailbroken with blackra1n, but as you all know well, when it restarts, you have to pass the blackra1n again. I use my phone with movistar my question is if I update to 3.1.3 can I jailbreak it in some way and not have the reboot problem?

    I would also like to know I have another iphone 3g with 3.1.2 jailbreak echo with blackra1n, no reboot problem or anything because it is not mc but lately I have problems with it and I want to restore how I can restore to an original firm without it being 3.1.3. XNUMX in order not to upload the basband because this one if I have to release a greeting and thanks to all

  16.   iPhone all said

    Ahh ok I understand friend Carlos in that case you must wait for the patch to be updated by the people of cydia ok ?? but it won't take long for that, my friend, you should only be updating cydia. just give it time….

    regards

  17.   satgi said

    By the way, the custom firm here is 3.1.2, I have done countless custom firms with the sn0wbreze with the firm 3.1.3 and ALL the same thing happens to them, they are restored well and such but they stay in the apple logo and there is no pass…. instead with customs firms of 3.1.2 if they work…. as always the sn0wbreeze they get it well tested….

  18.   fran said

    Ruben, so you tried to free him by moving them if you finished the contract of permanence. they are obliged to release it to you

  19.   Ruben said

    what's up i have it since december on 3gs

  20.   satgi said

    Well, they only give you a few months of permanence xD, thank goodness I finished in a couple of months and porculo I go to Pepephone with its rate of 3g 1gb per month for less € 15 ……. and 6 cents a minute to all…. so it will rebentat tonight same movistar xD

  21.   satgi said

    that if I will keep a movistar card to activate it with future firmwares and such xDD

  22.   cellusafe said

    CARLOS, don't say IT'S NO SERVICE, I have mine with that APPSYNC for 3.1 patch and it works perfect. TRY again and look for it well, HACKULO or BEYOURIPHONE, those are the sources that you must install, if you don't know how to ask again. Greetings.

  23.   berlin said

    Elio Parra
    the link is already right again
    I'm sorry but it is already the second link that is changed and I am afraid that someone has entered my Megaupload account and is screwing up the links ...
    ----
    jesusp
    If you have a 3g or a 3gs, if you did wrong if you need release
    ----
    cellusafe
    Firmware updates via itunes do not erase anything.
    It is only cleared when it is restored.
    ———–
    satgi
    Indeed someone is bugging me the links
    So far I have put them well again
    -----
    fco chunk
    DO NOT
    ----
    Ruben
    My advice is that the 3Gs do not update it to 3.1.3
    and for 3G:
    https://www.actualidadiphone.com/2009/10/14/tutorial-jailbreak-con-el-custom-firmware-3-1-2-modificado-para-el-iphone-%E2%80%9C3g%E2%80%9D/

  24.   Juan said

    I have the 3 gs of 16 without realizing it updated from itunes to 3.1.3 and the base ban has been uploaded to 05.11.07… what can I do? a greeting

  25.   Ruben said

    berllin why you tell me that the iphone 3gs does not raise it to 3.1.3? If it is solved that when I restart I have to pass the jailbreak again, it would be fine since mine is from movistar and I use it with movistar I shouldn't have to release it, which is the problem right? What I am not clear about is that if I upload to 3.1.3 I can jailbreak it and that I do not have to do it again when I restart

    Regarding the 3g, that tuto is for an iPhone 2g, right? I would also like to know if I download an original Apple firm I open iTunes and press shift + restore and look for the original 3.1.2 firm that I downloaded, I will have a problem that I upload to 3.1.3 because in this one I do not want why I have to release it that I use it with another company if I do it like this I could jailbreak it with blackra1n and pass it blacksnow and it would be like now, right?

    Thank you

  26.   rafalin said

    Hello, my question is if this method also works for the ipod touch 3g. Thanks

  27.   Dani said

    Hello everyone, I have a problem that has me super fly.
    I have a 3Gs of 16 of the new ones and had the firm 3.1.2 jailbreaked with bl4ckra1n, all perfect since I use vodafone. I had a lot of apps installed, the only thing that I already knew that I could not restart. In fact it turned off 2 times due to carelessness of the battery and I returned the bl4ckrain to it and without problems it returned to its state but yesterday, I don't know what the hell happened to it that when installing a cydia app it asked to restart, I gave it thinking that with bl4ckra1n it would return to his state but it was not like that, he gave the bl4ckra1n, the drawing appeared on the iphone but that way it stayed longer, then the screen went black and did not do anything, if I gave him to turn on again he would ask me to connect to itunes. I tried everything but there was no way to get it back. He wouldn't let me put any other firm so I had no choice but to update him to 3.1.3 because otherwise he would stay there dead. Anyway, now I can't use it with vodafone. I have read that with the mc it is not possible.
    If you know any solution I would really appreciate it, I don't understand why the bl4ckra1n didn't work for me yesterday… I didn't do anything different.
    Anyway, if someone can give me a cable I will appreciate it.

    Regards!

  28.   berlin said

    Juan
    You cannot do anything, you have to stay as you are, since you have gone up to Baseband.
    Try downloading and installing 3.1.2 through itunes, but I don't think you can do it through your baseband ...
    ----
    Ruben
    Because most likely you can't jailbreak it.
    The custom firmware 3.1.3 on the 3Gs is giving many installation problems and there is no IREB for that iphone
    For 3G, I have put the 2G link, the 3G link is this:
    https://www.actualidadiphone.com/2009/10/14/tutorial-jailbreak-con-el-custom-firmware-3-1-2-modificado-para-el-iphone-%E2%80%9C3g%E2%80%9D/
    I have also changed it in the other comment so that people do not lie
    ———–
    rafalin
    DO NOT
    ———–
    Dani
    I'm sorry now you no longer have a solution, yesterday you had it before going up to 3.1.3, stop now ta no ...

  29.   A said

    Hello everyone
    I feel the same as Dani with a new 3gs and now I have 3.1.3 installed, you can reinstall 3.1.2 or fix it so that it works with Vodafone.

    Thanks for the help.

  30.   berlin said

    A
    If you didn't save the ECID files in Cydia, I guess not.
    but it costs nothing to try with an original firmware:
    http://berllin.blogspot.com/2008/11/firmwares-iphone.html

  31.   Luis said

    Hello: Greetings to all and a call for help. Like many, I installed version 3.1.3 and now my iphone 3g is locked. It only lets me make emergency calls, the phone was unlocked and now I don't know what to do. Please someone help me. Thanks a lot…

  32.   iPhone all said

    WITH THE VERY GOOD AFTERNOON FROM VENEZUELA AMIGO LUIS AS IT WAS EXPLAINED CALARLY AT THE BEGINNING OF THIS POST, THE RELEASE IS NOT STILL AVAILABLE FOR 3G AND 3GS DEVICES TO UNLOCK IT, YOU MUST ONLY USE THE REDSN0W AS EXPLAINED IN ONE OF THE PAGES. THE TOP OF THIS PAG ON THE LEFT SIDE IS THE TUTE THAT YOU SHOULD USE TO UNLOCK TO RELEASE THE SISPOSITIVE YOU SHOULD WAIT.
    GREETINGS

  33.   egber said

    iphone for all: but how ago to unlock iphone 3g 3.1.3 without wifi

  34.   PARKET said

    SINCERELY YOU ARE ALL A CANE ... I WISH THERE WERE MORE PEOPLE LIKE THE ONE IN THIS FORUM THAN ...

  35.   PARKET said

    BERLLIN WHEN YOU COME THROUGH BCN PEGA A TOUCH UNCLE….

  36.   berlin said

    Luis
    Make the jailbreak with a custom firmware, using a card from the official operator (let you have it) ...
    https://www.actualidadiphone.com/2010/02/06/tutorial-jailbreak-con-el-custom-firmware-3-1-3-modificado-para-el-iphone-3g/
    If you get the jailbreak and you have cydia do this to see if you are lucky:
    http://berllin.blogspot.com/2009/05/3g-fuzzyband-downgrader-la-aplicacion.html
    egber
    The iphone 3g with FW 3.1.3 can not be unlocked even with wifi child without wifi

  37.   alexishard said

    HELLO TO ALL I HAVE THE 3G OF 16. I ALWAYS UPDATE MY IPHONE BUT NOW KON THE 3.1.3 THEY PUT ME IN DOUBT OSEA KE BETTER I LEAVE IT SO KON THE 3.1.2.
    I HAVE PLACED MANY GAMES AND APPS AND MY FEAR IS THAT SOME IS ERASED.
    BECAUSE OF THE MOST, I UNDERSTANDED KE IF I UPDATED KON THE 3.1.3 MAYBE I DO NOT RECOGNIZE MY CHIP KE IS CLEAR IN PERU.

  38.   cellusafe said

    hello ALEXISHARD.

    look ... if your iphone was originally bought in CLARO PERÜ. you will not have any problem, update right now by itunes.

    but if IT IS NOT ORIGINAL FROM CLARO PERU, it is better NOT to update. leave everything like that. the change between the one you have and the new one is not so great.

    greetings.

  39.   berlin said

    alexishard
    Do not update it does not serve you at all.

  40.   iPhone all said

    with a very good evening guys amirgo egber I apologize for answering you so late but really I have been super full but as always looking to help as far as I can ok…. Well, look previously, there was a program with which we released the iPhone 3G iH8s0now it was a kind of primitive software but if it worked, that was exactly where the iPhone 3G was unlocked by software if the old sources did not work this small program would . Anyway, currently the creator of blackra1n is the only one who has worked on that but I don't know if other similar programs will come out to free the iphone without the need for WI-FI.

  41.   jpa said

    Berlin,
    Good, some doubts

    1. I have 3 Gb Iphone 32GS
    2. firm 3.1.2 custom, for several operators, that is, it is illegal
    3. modem - 04.26.08 that I release with ultrasnow

    The question is, if I install a custom 3.1.3 created with sn0wbreeze, it won't upload the modem to the new one?

    The other question, if it works well and remains with the same modem - can I release it again with ultrasnow?

    And finally, does the patch for the IPA or appsync applications work there? in 3.1.3

    Those who have already done something to confirm me, thank you

  42.   logiech said

    I just updated an iphone 3g to the custom firmware that is put here and after correctly updating everything, when restarting (before activating the iphone) the iphone is stuck in a kind of snowflake.
    what's going on?

    Thank you.

  43.   dof said

    And who knows when they will release the 5.12.1 baseband since it put the legs in.

  44.   berlin said

    jpa
    Don't ever go upstairs.
    It can be done without problems with your baseband, but for you 3.1.3 does not contribute anything
    It is also causing heating problems for some batteries.
    You are very good how you are
    By the way, when you upload the version, try to do it with redsn0w or with the PWNageTool. You have a privileged baseband and you must take care of it. Always play it safe.
    logiech
    That you have had a problem in the installation.
    What firmware have you started from?
    The snowflake image is that of the custom Sn0wbreeze

  45.   jhonatan said

    I had my iphone 3g with original version 3.1.2, I mean, it did not have jailbreak, well I followed the steps update itunes 9.0.3 download the firmware 3.1.3 from here above I followed the steps shift and restore in itunes and select the firmware 3.1.3 previously downloaded, the restoration began, two minutes passed, everything was fine until I get a message that says an error, I don't know why iTunes detected a problem with the firmware and I left the cell on the screen of the usb cable and it no longer pulled, what was disconnected was to disconnect it, close itunes, press power and home at the same time, until it turned on again and the usb cable came out again, opened itunes, connect the iphone, reject the message that comes out and says that the iphone must be restored, and again, shift and Restore but this time instead of selecting the firmware 3.1.3 select the firmware 3.1.2 that I had already downloaded, which is also modified and ready, I already had the iphone with modified 3.1.2 firmware, the next step was to jailbreak with blac kra1n and now I have it jailbreak ……
    Well this will serve those who have the iPhone updated to 3.1.2 with iTunes and I would not recommend 3.1.3 because the iPhone cannot be released, it is better to wait

  46.   jhonatan said

    for those who leave them lying with the snow flake or oja they have to press power and home at the same time it turns off it turns on again and the flake will continue but there is no need to release the buttons you have to keep pressing until the usb cable appears but no It will come out white it will come out black with a flake in the background dark style well now if you release the buttons when that appears and connect the iphone to itunes and shift more restore (ovio first they will get the itunes message that an iPhone has been detected in recovery and what to cancel that) after shift and restore we select modified 3.1.2 firmware that they have to download and for those who have already echo jailbrak with 3.1.2 and have not deleted it because they will not have to download it so with that it will be restored and they will not come back to try to be jailbroken with 3.1.3 because they will not be able to do it well at least I could not no matter how much I tried ...... my own experience

  47.   carlos92 said

    Well, I have read but rather I have been confused, ok I have an iphone 3g baseband 5.12.01 I have updated to 3.1.3 but from what I have read there is no jailbreak, I would like to know if I can install a custom firmware of 3.1.2 for go back to that and stay in that while there is jailbreak for 3.1.3 ?? PLEASE HELP!

  48.   shelter said

    I don't know why but I have already tried to install this custom firmware and the 3 or 4 times that I have tried to install it, the iPhone has been blocked when it finishes restoring the firmware and it will validate it and connect it with the iTunes ... is there any other custom firmware that does not of this kind of problem ?? Otherwise I will have to stay in 3.1.2 ... Thank you very much !!

  49.   core said

    berlin
    hi all.
    I have a 3GB iphone 32gs (released by imei) baseband 5.12.01 I have updated to 3.1.3 but from what I have read there is no jailbreak, or if there is with Sn0wbreeze for the 3 gs you have to look at the iBoot (for both in UFO mode as in recovery) and the iBoot does not appear, when I carry out the Sn0wbreeze process when I get to the step of choosing terminal (2G or 3GS) when I select 3GS I get an error blackra1n is not supported 05.12.01 and something from GeoHot .I would like to know if I can jailbreak, install a custom 3.1.3 firmware or do a donwgrade to custom 3.1.2 or original 3.1.2 and then jailbreak with blackra1n…. PLEASE HELP!
    a ludo and thanks

  50.   George said

    Hello everyone, more or less the same thing happens to me as ruben, I have my iphone 3gs updated to 3.1.3 (7E18), with the baseband that I don't even know what 05.12.01 is.
    My intention is to continue with my contract that I have with Movistar, I have no intention of releasing it or anything like that but if I want to jailbreak it, now my question is:
    Can I jailbreak it? And the most important, if it could, how should I do it? Because I understand that the blackra1n does not work with this version it cannot.
    Thank you all and sorry for the inconvenience.

  51.   berlin said

    carlos92
    With redsn0w 0.93, you can jailbreak 3.1.3:
    https://www.actualidadiphone.com/2010/02/08/consideraciones-del-devteam-ante-el-jailbreak-del-fimware-3-1-3-en-el-iphone-y-el-ipod-touch/
    Read the part:
    "If, on the other hand, you have an iPod Touch 1G, iPhone 2G, or an iPhone 3G and you don't need an unlocking, you should also use the redsn0w, but version 0.9.3, since it is faster and you will not have to go through a complete restoration process. All you have to do is do an update and then run redsn0w, pointing to Firmware 3.1.2, instead of Firmware 3.1.3 ”.
    ---------
    shelter
    Don't update to 3.1.3. Has no sense. It does not contribute anything to the iPhone.
    -----
    core
    Without knowing the iBoot you have, you cannot advise anything
    -----
    George
    Same as core, it's up to you iBoot

  52.   George said

    forgive my ignorance berllin, but how can I know my iboot ??? I don't know what it is and I don't know how I can find out.
    Thank you and sorry for the inconvenience.

  53.   carlos92 said

    berllin sorry for the inconvenience but ok I don't understand what you mean, what I told you is that I have an iPhone 3g in version 3.1.3 locked .. in baseband 5.12.01, is there or is there no jailbreak? Please give me the steps how to do it, if there is not, I would like to know if I can do a downgrade, that is, to download 3.1.2 and unlock it normally

  54.   gon said

    Hi, I also have an iPhone 3GS 16GB and I accidentally updated it to 3.1.3. (7E18) ,, what can I do, I want to jailbreak it ,, please help and thanks in advance

  55.   cellusafe said

    CARLOS92 AND GON …… hello, JAILBREAK in 3.1.3 is as simple as this: download REDSN0W 0.9.4 and the firm 3.1.2, when they open redsn0w and ask for the firm, they give it 3.1.2 then follow the instructions and LISTOOOOOOO our 3.1.3 with JAILBREAK !!!!!!!!

  56.   Francisco said

    Celusafe is used for iPhone 3Gs of the new Telcel mexico ?? Thank you.

  57.   gon said

    Thanks dude, we are talking about 3.1.3. (7E18) no? is that it says that you can not see if I'm going to screw it up and I'll charge it ,,, anyway if you can send me your email to consult, I thank you celusafe ...

  58.   carlos92 said

    celusafe is released to me for any company ?? Likewise, can you give me your msn?

  59.   cellusafe said

    hello again gon and carlos92…. we are talking about 3.1.3 but this is ONLY for JAIL, it CANNOT BE RELEASED yet, it is only JAIL… nothing more. with redsn0w 0.9.4 .. RELEASE is still pending to exit. So you CAN ONLY UPDATE if your iphone is LEGAL, otherwise you CANNOT UPDATE or you lose your release. Regards.

  60.   carlos92 said

    how legal ?? mmm but can I get down to 3.1.2? What? carlos@nhaxers.com.ar it's my mail

  61.   Km said

    How do we know when the unlock is already here ???
    urgee me

  62.   gon said

    Hi, I've been reading things out there and apparently you can't jailbreak 3gs 3.1.3 ,,, Anyone have any ideas?

  63.   Mauricio said

    Hi, I downloaded the file, but when uploading it from iTunes it tells me: "iPhone cannot be restored because the file is not supported." I have loaded it well, I have downloaded it well, I have even tried to rename it just in case ... but I can't think of what else to do. I tried to crack it myself. With the last snowbreeze, and I got it, I even followed 3 different tutorials. (I did it 3 times). and when trying to load it into iTunes it gives me error 1604 or 1600. Could anyone help me ??

  64.   Mauricio said

    Mea culpa. I thought it was for 3Gs ... I was wrong, sorry

  65.   Mac03 said

    Well, it is true that the iPhone can be released by hardware, because in a site where they release the phone they told me the iPhone can be released in two ways by hardware or by software and I wanted to ask if anyone knows something ...

  66.   andres said

    Hello, my iPhone was left with the black screen with the apple logo and it did not start! I did not know what to do and I restored my iphone and now it goes and starts it is a 3gs and it has put the 3.1.3! and I had the 3.1.2 jailbreak I don't have the original sim and it asks me for it !! What do I do, can I UNLOCK IT? to use another sim? PLEASE HELP…

  67.   andres said

    thanks berllin !! I have written in (3GS) haa and I have 359.3 can I do something with the 3.1.3 unlock it ??? THANK YOU

  68.   alexishard said

    THANK YOU FOR YOUR ANSWERS CELUSAFE AND BERLLIN
    IN CONKLUSION I KEDO KON MY VERSION 3.1.2 BECAUSE KUANDO LO KOMPRE WAS KON CHIP T&T THEN I DIDN'T KNOW ANYTHING OR IF I WOULD UNLOCK IT ONLY THE WIFI JEJE USED IT.
    NOW BROWSING THE WEB I MYSELF LEARNED TO UNLOCK MY IPHONE (blackra1n) .. AND I PUT THE APPLICATIONS OF MY PREFERENCE.
    AND YOU WORK FOR ME HAIR ...
    GREETINGS FROM LIMA PERU… THANKS VERY MUCH

  69.   cellusafe said

    that is the best. leave it at 3.1.2 until a better update comes out that brings real changes.

    I just bought a 3GS and that if I leave it in 3.1.2 if not I get blocked and it does not serve me at all.

    greetings and do not update !!!

  70.   berlin said

    andres
    You can't, you have the new iBoot

  71.   fm said

    I can not do the jailbreak because I was wrong 1600 alluda please

  72.   fm said

    Why does sn0wbreeze not active, I don't know what it means

  73.   Francisco said

    an error has occurred 1611 that medice itunes I don't know why

  74.   berlin said

    Errors 160x is already put in the tutorial that you have to use IREB

  75.   acoustic said

    Hello Berllin ,,, small query and to the point ,,, if I have the Iphone released by Imei ,, does it mean that I can put the firmware modified for the Italians ,, and it will remain released? ,,
    Thanks in advance..

    A greeting.

  76.   Nephi benjamin said

    Greetings olle I have an iphone 3g 3.1.2 with the ban base 05.11.07 I am in the Dominican Republic and I use the company of course .. but they brought me the phone from the United States I was with At & t but I want to know if by doing this turotias I could stay for release it later

  77.   berlin said

    acoustic
    In theory SI
    I tell you in theory since I have never tried it
    ———–
    Nephi benjamin
    If you use clear you already have it released with 3.1.2
    Do not go over to 3.1.3 that does not provide improvements for the iphone and outside that you create problems.
    You will already when it touches in superior firmwares ...

  78.   Nephi benjamin said

    Hello Berllin post check that I use of course and it is blocked, I mean, it is not blocked, so release it .. you understand and my phone is version 3.1.2 (7d11) firmware of the modem 05.11.07 and it is blocked and I tried to do the jailbreak and it does not work for me. put the blackra1n you understand I mean the first time if it worked for me but then the wifi did not want to enter me .. and so I uninstalled it then when I solved the problem of the wifi that I wanted to install blackra1n of new no longer installed help me please my email is nefibenjamin@hotmail.com

  79.   Jonathan Leon said

    Hello everyone in advance, this is my first comment, I just bought an 3Gb Iphone 8g in Claro Peru from the same company.
    Well, what I would like is to know if I can use the information in this post. My iphone has a modem firmware. 05.12.01 I would appreciate your help.

  80.   berlin said

    Nephi benjamin
    Try to install firmware 3.1.2 again and then pass it the blacra1n and then the Blavsn0w to release it.
    You must start from the beginning.
    Under no circumstances go up to 3.1.3 since you can only jailbreak it, but not release it
    -----
    Jonathan Leon
    You can not.
    With your iPhone you cannot unlock it, you can only jailbreak it:
    https://www.actualidadiphone.com/2010/02/05/tutorial-jailbreak-con-redsn0w-0-9-4/
    -----

  81.   Nephi benjamin said

    Greetings Berllin .. explain me and put a Link where all these Programs are as well as the blackra1n as the blavsnow .. and the firmware 3.1.2 for my Iphone .. for me to do it and explain to me well how I do the whole procedure I do not want to come to water it .. thank you I await your answer brother

  82.   berlin said

    Nephi benjamin
    1st - Firmware 3G 3.1.2:
    http://berllin.blogspot.com/2008/11/firmwares-iphone.html
    ----
    2º - Blackra1n Tutorial along with the Blacra1n download link:
    https://www.actualidadiphone.com/2009/11/04/tutorial-jailbreak-liberacion-y-activacion-del-iphone-2g-con-blackra1n/
    The tutorial is the same as for 2G until you get to:
    "Wait about 20 seconds for the phone to restart"
    At that time you already have the Jailbreak
    From there you have to pass the Blacks0w
    ----
    Blacksn0w video tutorial:
    https://www.actualidadiphone.com/2009/11/04/un-video-de-blacksn0w/
    ———–
    When you finish you have done the Jailbreak and the release of the iPhone 3G with Firmware 3.1.2

  83.   Nephi benjamin said

    Berllin Thank you very much .. and I do everything you recommended and ready, my iphone was released for my Country .. Dominican Republic and especially for all companies such as Orange .. of course .. long live… and thank you very much for your contribution. I restored the Firmware 3g 3.1.2 And then I passed the blackra1n and connected it to the wifi in the blackra1n I got an Option k said snow I gave it there and ready in less than 10 seconds my phone was released .. Well, without anything else dismissal .. I will continue to give input on this website .. since I quite liked the quality of help that there are among users

  84.   albertohd2 said

    Hi all!
    I have an iPhone 3g with version 3.1.3, 05.12.01, and I try to jailbreak by installing this firmware, but when I restore it, the iPhone is left with the image of when to activate it, a USB and the symbol itunes, and after a while I get an error, the itunes I have is 9.3. I have tried it on a mac, and on a normal pc, and nothing, and then the iphone is stupid, itunes asks me to restore it, how can I do it?

    Thank you very much
    regards

  85.   ROBERTO said

    Hello friend, I have a case very similar to all of them, I have my 3gb 16G iPhone, it happens that my sim card does not detect me, The version I have is a 3.1.3 I already did the jailbreack with redsn0w but nothing, it still does not detect the sim card, the operator I use is not the official one and the basemand of my iphone is now 05.12.01, I would like you to help me in some way, thank you in advance!

  86.   elzenzei said

    This worked for me on my iphone 3G 3.1.3 with baseband 5.12.01, Model MB, Bootloader 5.9.
    Synchronize before reading hahaha and well I was suffering the weekend, but finally I stayed.
    Synchronize with itunes, I update everything, the firmware, the baseband, which does not worry me much because I have the service with the iphone provider. I lost cydia, my applications and everything, I could not downgrade to give it with the blackra1n, it did not pull with the sn0wbreeze, nor with redsn0w.

    1. I ran the iReb to get the white screen (http://ih8sn0w.com/index.php/welcome.snow)
    2. install through itunes (shift + restore) the custom firmware that I found on this page: http://www.iphoneheat.com/2010/02/download-iphone-custom-firmware-3-1-3-ipsw
    They can take the one that works for them, it depends if it is an iPhone 3G, 3GS, iPod touch, if they want it activated or not activated.

    I hope it is useful to at least one person like me hahaha.

    regards
    @elzenzei twitter.

  87.   TOMORROW said

    Hello friends.
    I have read the entire post from top to bottom and I don't know.
    I'm going to explain myself, yesterday I found an iPhone on the street and I don't know if it's 3g or 3gs or that it's just what 16gb iPhone puts behind it and it's white like the one in the image of the topic, I want to use it with the another company, he is from movistar and I want to use it with vodafone, can you?
    If you can explain to me how because I already tell you that I do not understand anything, I think I screwed up when I updated it by iTunes before reading anything on the subject, I know that now it says that the version is 3.1.3 (7E18) the MB500B model and firmware 05.12.01.
    You can contact me through manantonio69@gmai.com.
    Thank you very much in advance.

  88.   Javier said

    Hello,
    I have an iPhone 3G with Claro (not released):
    - My current firmware is 3.1.3 (7E18) I updated it with itunes when I bought it (2 days ago)
    - Modem firmware 05.12.01 (I think you call this baseband, right?)
    - I have model MB489LA

    I bought the cell phone in Claro (Peru), I currently use it with Claro and I have no intention of releasing it.

    using this custom firmware…. if something fails later ... is it possible to restore it with the firmware downloaded by iTunes?

  89.   victorbordas said

    hello how are you i need help please rrrrrrr
    I have an iphone 3g and I updated it to 3.1.3 and now it appears
    connect the iphone to the itu hello how are you need help please rrrrrrr
    I have an iphone 3g and I updated it to 3.1.3 and now it appears
    connect the iphone to itune ... and only call from ergmegercia
    I want someone to help me ... unlock the iphone ... ... I followed all the steps that have been indicated to me but it does not work ... when I try to do redsn0w 0.9.4 and I put it in dfu mode ... ... my iphone ceplende the black screen and do nothing else ... but not as it should? it does not show me the hard drive ... nor even the pineapple loading !!! someone help me
    ne… and just call from ergmegercia
    I want someone to help me ... unlock the iphone ... ... I followed all the steps that have been indicated to me but it does not work ... when I try to do redsn0w 0.9.4 and I put it in dfu mode ... ... my iphone ceplende the black screen and do nothing else ... but not as it should? it does not show me the hard drive ... nor even the pineapple loading !!! someone help me

  90.   Gabriel said

    I have done the Jailbreak over and over again as indicated, however my iphone seems to be unable to restart on its own. Freezes with black screen. When I turn it on manually it works perfectly however it did not jailbreak. Anyone have any idea what's up?

    My iphone is 32gb iPhone 3gs. Firmware 3.1.3 (7E18)

  91.   Dani said

    Fuck .. people do not read or are stupid? ¿?. Let's see, gentlemen, the MC has not yet come up with a solution!

    I repeat it again?

  92.   SUPPORT said

    I HAVE A PROBLEM WITH MY IPHONE I HAD IT RELEASED AND IT MAKES THE ERROL OF PUTTING THE 3.1.3 BERSION ON IT AND NOW IT GETS ON 05.12.01 AND I CAN'T FIND A WAY TO USE IT WITH MY T-MOBILE SIN. INTALA CYDIA AND ALL THE KE ME PROGRAM APPEARED ON THE INTERNET NOW AND I KEDADO WITHOUT COMMUNICATION KIERO KNOWS HOW I PUT MY IPHONE 05.11.07 TO BE ABLE TO RELEASE IT PLEASE REKIERO HELP AS SOON AS POSSIBLE IT IS NO PRESSURE IS KE DIEDO FOR MY 980 IPHONE BUY IT CACH IN TT NADAMAS IN THAT COMPANY FUNSIONA my email is jonelvi_2007@hotmail.com

  93.   Jobs said

    Help at the moment there is no unlock for your case, I have a friend with the same problem and we just have to wait. Some people speak of June 7, but I don't know where they got that date from.

  94.   bio bit said

    mmmm ps I have been trying to jailbreak my iphone 3g 3.1.3 withbasemend 05.12.01 and I have not been able to… I need help I am from Mexico…. I want to do it telcel because it is at-t and I already tried everything aaaaa .. in itunes it marks the error 1601 and I follow your steps and it does not work what I do

  95.   Paco said

    Hello berllin.
    I had an iPhone 2g imported from the USA and I lost it.
    On the internet I bought an Iphone 3g from a turkey that according to him he could not keep.
    In short, the iphone is movistar and I use simyo. It has a 3.1.3 software, with a 05.12.01 baseband and a 5.8 bootloader .. Can I do something to release it and use my company? Because I tried the snowbreeze and it doesn't work for me. I use PC.
    Thank you

  96.   berlin said

    Paco
    For the moment I have retired and I am not going to continue almost here.
    I tell you because I explain what you have to do and I will not reply to subsequent comments:
    1st - do the Jailbreak with the redsn0w 0.9.4:
    https://www.actualidadiphone.com/2010/02/05/tutorial-jailbreak-con-redsn0w-0-9-4/
    2nd - Install through Cydia, «Fuzzyband 4.0-b4-2», and if you have Bootloader 05.08, you will download the Baseband to 04.26.08.
    Video: http://www.youtube.com/watch?v=9Vh_ZnkHTQA&feature=player_embedded
    3rd - Download and install the ultrasn0w from Cydia and you already have it with the jailbreak and released for any operator

  97.   Alex said

    Hello

    I will try to explain my problem and what I have done to see if they can help me:

    I need help please I am new to this. They sold me a 3 GB iPhone 16G. When they gave it to me, the iphone was restoring itself (the apple and the circle appeared moving). It was like this for many hours and I began to find out through the internet what I could do ... there I came to that I had to restore it and update the firmware. Unfortunately I did the update directly from iTunes (without knowing that it would leave me the latest firmware that I don't know what it is). What happened is that the iPhone was left in a mode that only emergency calls can be made and nothing else. I kept looking on the internet and found the custom firmware (on another page) and without knowing it I restored it again but with firmware 3.1.3 activated (I did not know which to install if activated or not activated), and iTunes let me do it without problems ... but I stayed exactly in the same place (I thought that being with jailbrake would solve the emergency call).
    The problem is that I cannot get out of this problem, I try to put the custom firmware NOT activated but I get an error 1600 (I already tried to use the iREB ​​and when I chose the iPhone model, the window did not appear or the screen did not turn white ... simply nothing happens). It will be that I can not do it because the firmware is already activated ??? and I can't install the other firmware not activated ???. or is it a problem with windows 7 ??? I have also done everything they say in the tutorials, I have the latest version of iTunes in windows 7.
    Unfortunately, as I don't have much information about the previous user, I don't know if he had it jailbroken before or not ... the only thing I know is that he used it with a SIM from Movistar (Chile).
    I have been trying to solve the problem for 2 days and I don't know what to do ... from what I have read, for now I will surely not be able to unlock the iPhone to use it with any SIM but finally I would like to use everything else while the solution arrives to use my SIM (Entel pcs).

    What can I do so that the sim does not ask me and enter the iphone menu ???
    I have not put any SIM to test so far.
    Is there any way to be able to use my iphone at least as an ipod touch ???

    please I need help I am desperate !!

    thank you very much!

  98.   erjuanjo said

    After trying to install this firm I always have the symbol of the snow half an apple and it never restarts ... can someone help me? How can I release a mobile with 4.0?

  99.   rodrigo said

    🙂 thank you

  100.   yunetsy said

    Good afternoon, I have an iPhone 3g with 3.1.2 with the modem of 05.11.07 and unlocked ... what I want is to update it to 3.1.3 and I want to know if I can do it here and if it can be unlocked after having jailbroken it please I need help