El Devt, yesterday updated the redsn0w to the version 0.9.4, for the realization of jailbreak to the new Firmware 3.1.3 of some of the devices.
Devices in which jailbreak can be done with the redsn0w 0.9.4:
iPhone 2G
iPhone 3G
iPod Touch 1G
iPod Touch 2G (Not MC)
Devices that Cannot jailbreak with the redsn0w 0.9.4:
iPhone 3Gs
iPod Touch 2G (MC)
iPod Touch 3G
Before we start, sync with iTunes to back up Calendar, notes ...
Preparation:
1 - Keep iTunes up to date
You can update iTunes directly from iTunes itself or you can download it from here:
2 - Download the Firmware 3.1.3 to your computer or restore directly from iTunes:
iPhone 2G
iPhone1, 1_3.1.3_7E18_Restore.ipsw
iPhone 3G
iPhone1, 2_3.1.3_7E18_Restore.ipsw
iPod Touch 1G
iPod1, 1_3.1.3_7E18_Restore.ipsw
(It will be active until blocked by Apple)
iPod Touch 2G
iPod2, 1_3.1.3_7E18_Restore.ipsw
(It will be active until blocked by Apple)
3 - Download the Firmware 3.1.2 to the computer:
iPhone 2G
iPhone1,1_3.1.2_7D11_Restore.ipsw
iPhone 3G
iPhone1,2_3.1.2_7D11_Restore.ipsw
iPod Touch 1G
I do not have the link since the one I had was changed by Apple
iPod Touch 2G
I do not have the link since the one I had was changed by Apple
4 - Download the redsn0w 0.9.4 on the computer:
redsn0w 0.9.4 for Windows
redsn0w 0.9.4 for Mac
5 - Download the Bootloader 3.9 and 4.6 on the computer ONLY for iPhone 2G:
Bootloader 3.9 and 4.6
We begin:
1 - Open el iTunes.
2 - Update / Restore the device to the latest version of the Firmware 3.1.3 with iTunes as I said above.
To Restore from downloaded firmware to computer, select the downloaded file:
Windows: Pressing the key "Shift" in unison that button "Restore" from iTunes.
Mac: Pressing the key Alt in unison that button "Restore" from iTunes.
3 - The Firmware 3.1.3 on the device
4 - It opens redsnow 0.9.4, click on "Browser" and the Firmware 3.1.2, downloaded to our PC or Mac (it will be searched through the path where it was saved).
5 - Select Cydia .
6 - Select Unlock across Iphones 2G.
7 - If you have a iPhone 2G select the boot loaders previously downloaded on the PC or Mac (It will be searched through the path where it was saved).
8 - The next steps are quick. If they are done wrong, nothing happens, you can start over without problems. More than counting time follow the movement of the evolution of changes on the screen.
Press the button "On off".
Without releasing this button, press the button "Home". (Home + On-off).
Release the button "On off".
It will start working by itself and the Home button is released.
9 - When finished, we will have our device with the Jailbreak done in the Firmware 3.1.3 and with Cydia installed.
The Iphone 2G will automatically be released for any SIMplatforms, 3G will only have the Jailbreak done, for the release at the moment we will have to wait.
Hello, as the tutorial indicates, I install the firmwere on my iphone 3g 3.1.3 but the firmwere that I charge to redsn0w is 3.1.2 is correct, greetings.
is there appsync 3.1.3? or does 3.1.2 work with 3.1.3?
regards
Very good article Berllin
Wait then, I have an illegal 3G
Like good news coming out!
bay
alfo
Correct
The 3.1.3 you install it first on the iphone
The 3.1.2 you install it later through redsn0w
Riky
I have not tried it yet since I just jailbroken my 2G to do this tutorial and now I am working with 3Gs, so today I will not be able to check it.
Jooooo. I want it for the 3GS 🙁 although 3.1.3 does not contribute anything new but good….
thanks berllin, do you think you have time later to do a fw custum? Thank you
on the iphone 2g and 3g it works wonders… ..tried with this tutorial.
Slds
Good evening berllin and forum members,
Once again I thank you for all the updates that keep us up to date in the world of the iphone.
My question this time is the following I have a 2G iPhone with firmware 2.2, would there be a problem in updating it to version 3.1.3 directly or do I have to take it to another one prior to the most recent update ?.
I also wanted to know if you know or have a link that tells me how I can make a backup of the applications that I have downloaded through cydia (including data that has been saved) to install them again after updating.
Nothing happens. You can update it without any problem and then perform the jailbrake.
I have an iPhone 3g .. and I need the unlock and the jailbreak .. I have always used your firm berlin and I always walk great. do I have to wait a little longer for that?
I hope your answer
Excuse me, is there a chance that a new version of redsnow will be released for the mc model?
The last time I loaded the original signature through iTunes, an image of Steve Jobs appeared with a few words in Russian. I don't dare to do it until there is a custom firm.
He who warns is not a traitor ...
Miguel
- When it can be done, I will make a custom
------
Gabriel
You can go from the firmware you have to this one directly with the tutorial
https://www.actualidadiphone.com/2010/01/10/pkgbackup-3-1-9-%e2%80%93-actualizacion-%e2%80%93-cydiastore/
---
https://www.actualidadiphone.com/2009/10/11/pkgbackup-videotutorial-de-treyvelan-para-hacer-una-copia-de-seguridad-de-las-aplicaciones-de-cydia/
----
adrian
We have to wait…
---
efren
I have no idea
but with Firmware 3.1.2 it works great, all you have to do is not turn off the iphone. nor restart it.
I have a co-worker who did it for him 1 month ago and he still hasn't had to pass the Blackra1 again.
And also with that it takes less than 30 seconds
----
I have already done it with my 2G and x with a friend's 3G, without the slightest problem
I have the aplbackup application installed and I have used it to change the version to 3.1.3 and it has worked correctly, it has recovered the previously installed cydia applications
Mmmm I have not gone to the new Firmware 3.1.3 I will wait for 4.0 but as always great contribution from berllin..tose big !!!! hahaha
Greetings.
Installed on the iPhone EDGE, no problem.
what I like about this new version of redsn0w, is that you can choose the boot mode, with custom image or verbose (text) mode by viewing the kernel messages.
😀
Hello berllin, does this redsnow upload your baseband? Should you do that? There are no risks ?! I read on twitter that geohot did not recommend it, I think ...
I await your answer, greetings
hello berllin, i'm marta i have a 3gs, a month ago i released it thanks to blackrain and last night i updated to 3.1.3 because itunes invited me to do it… and at what time !! again I have the iPhone capped ... with how happy I was !! Any forecast of when it will be ready for 3GS?
thank you very much
I have updated the firm to 3.1.3 and I still cannot find wifi networks, I have jailed it and more of the same, I am black with my iphone, the battery is consumed in less than 12 hours, I cannot find wifi ... someone argggg do you have any idea what i can do? thankss
For pask:
The same thing happened to me once, in version 2.x I restored from iTunes 2 times and then did the whole process from 0. try it, -)
jajajaj madremia how silly / a will there be that I have a paperweight iphone eh ??? If you know that you have a mobile that is to work in another company and that you have to make stories for it to work released…. Why update or touch if you have no idea ???????
Thank you very much berllin for your prompt response and I will review the application. You do not know if it is possible to do the same with those downloads from install0us? Geohot is announcing that it will not be possible to do a downgrade if it is updated to this version, does this happen for all the iphone or only for those that in the post you specify that the jailbrake cannot be done? Thanks in advance. Greetings.
Hello. I'm trying to transfer it to a 2g and it stops me in
Waiting for reboot. I don't know if it will be because when I try to update (3.1.3)
it won't let me do it from the one I download from here. I did it from
the official. Then I follow all the steps in the tutorial and it doesn't work for me.
Any ideas? Thank you
Perfect the tutorial of the post. Thank you already install
One question, which should be used for thetering.
hello berlin I'm still with a firm custon of yours, from 3.1.2 and I still keep the 4.28 baseband… .. and I'm from bomistar bone that at the moment I'm not worried about releasing it, but just doing a jail….
Can I update to 3.1.3 without any problem and jail it with redsn0w 0.94?
and can I upload the security copy (pkgbackup) if I can jail with the reds0w to firm 3.1.3?
It would be helpful if you piss me ...
and congratulate you for always working on it man
greetings from tenerife ..
hello berlin I'm still with a firm custon of yours, from 3.1.2 and I still keep the 4.28 baseband… .. and I'm vomiting, so at the moment I'm not worried about releasing it, but just doing a jail….
Can I update to 3.1.3 without any problem and jail it with redsn0w 0.94?
and can I upload the security copy (pkgbackup) if I can jail with the reds0w to firm 3.1.3?
It would be helpful if you piss me ...
and congratulate you for always working on it man
greetings from tenerife ..
I have a problem with my mac doing the jailbreak for the iphone 3g 3.1.3 and it hangs on me waiting for reboot, does anyone know why it may be ??? thank you
very good post thank you very much…!
Hello. very good job is an excellent option
and it works perfectly, I had already been scared of
I don't have cydia on my iphone Thank you very much
Thanks for the tutorial.
Just for information, you can insert these sources in Cydia:
1. Add this source
http://iphone.org.hk/apt/
2. Now find and install the following:
Install Patch 3.1.2
Second source for Patch 3.1.2
1. Add this source
http://www.sinfuliphonerepo.com
2. Now find and install the following:
AppSync for OS 3.1.2
The one that worked for me was the second without ful since the Install Path asks you to have your firmware <= 3.1.2
The same thing happens to me as to dsam, does anyone know what can happen? Thanks in advance.
I have done everything as I was playing, and it got stuck right at point 9, when I should have finished the whole process! The apple apple has been coming out for an hour, and sometimes I was appreciating the ring with the sticks spinning as if I were thinking.
What I do?
ko I did it and even if cydia was installed there is no way to free the computer, I cannot install the cracked applications and also I cannot download any files from cydia! : Yes, I think it didn't work for me at all! : /
Hello Berlin I am a super fan of this page, this is the first time I post and it is with a question; i have an ipod 3g 3.1.2 jailbrokiado with blackra1n.
today I wanted to restore it with itunes 9.0.3 always with firm 3.1.2 but I couldn't, even if I download the firm several times it gives me an error that says that the build does not go with the device or something like that, when it verifies with the server.
My question is, when a new firm apple comes out, it no longer allows restoring the previous ones or the file was corrupt or unsigned?
A signed file is one that is not altered or I'm wrong, in short I had to restore with 3.1.3 and I lost my beloved jailbreak, to keep waiting.
I already did everything that is indicated here but
I'm keda where it says "waiting for reboot"
and from there nothing happens anymore how long I have to wait
What do I have to do, please help me, I have an ipod touch 1G
marten
If when you had 3.1.2 you saved the ECID files through Cydia, it can be downgraded to 3.1.2, but if you didn't, I'm afraid you're going to be hanging for a while.
----
Kong
If it works well for you, do not change, it contributes very little
-----
dsan - Daniel - Piceo2k - diego
"Waiting for reboot": It is another of the problems of your USB ports. When it appears, disconnect the USB port and reconnect it
-----
flea
Stay as you are, with that Baseband. You gain nothing by updating.
You have the best Baseband for future Jailbreas in case it is necessary.
-----
oriole
Put it in DFU mode and start over
-----
Kelvin
The files above are all original and with links to the original APPLE page.
UFF… .. let's see… First of all, I have no bloody idea how this works… I brought an iPhone from NY 2 years ago, and a friend hacked it so I could use it with Yoigo and I guess you mean What is with the jailbreak done, right? .. I have version 3.0, because it was updated in its day with redsnow 0.7.1…. Now I have to do the new update and I have no idea how to do it so that the telef I am not left with paperweights.
I have downloaded all the 2g links, the redsnow, the bootloader ... etc ... simply if I follow these steps I can update it without any problem from version 3.0 to 3.1.3 and with the new redsnow? When you give it to restore from itunes, it will not be pilladisimo or something ??
Thanks for your help! and sorry to be SO rookie
Hi, I did everything like this in this tutorial and it was unlocked and then installed the ultrasn0w and when I put the sim in, it kept looking and for a long time it told me that there was no service.
I already tried subtracting the network and nothing.
I need guidance on what to do.
i have an iphone 3g
firm 3.1.3
I want to use it with a TELCEL mexico sim
Thanks in advance.
Hello everyone! I have a 2G iphone with version 3.1.3 with firmware 04.05.04_G I followed all the steps explained here very well and everything turned out excellent! but I continue with the same problem that I had when I went up to version 3.1.2, which is that only my iPhone turns off, it happens very often when I stop using it for a few minutes it stays black and the device turns off, I thought that when I went up from version would accommodate but nothing. that could be happening? somebody could help me? Thanks and regards!!!!
It does not work friend in advance, thank you, I believe that if I could look for you elsewhere….
crazy try redsnow with 2g 3.1.3 and it doesn't recognize firmware
for fa help
HELLO, I WOULD KNOW WHEN THE 3G IPHONS ARE UPDATED BECAUSE I TRY AND CANNOT HELP MY IPHONS WITH THE 3.1.2 WORKING WELL, AND WITH THIS NEW VERSION 3.1.3 IT DOES NOT UPDATE DOES NOT RECOGNIZE THE SIM, THANKS I NEED ANSWER CHAU?
xtf
If you do not understand much of this, the easiest thing is to pass the Blackra1n:
https://www.actualidadiphone.com/2009/11/04/tutorial-jailbreak-liberacion-y-activacion-del-iphone-2g-con-blackra1n/
-----
andrew antonio
The ultrasn0w, does not work with the 3.1.3
to date with the 3G you can only do the Jailbreak can not be released
-----
andrea_venezuela
It seems to be a hardware problem and not a software problem
-----
diego
When it stays in the "waiting for reboot", disconnect the iPhone until the WHITE SCREEN turns on, and then reconnect it ...
-----
horus
You do something wrong or explain better that the Firmware does not recognize you since I have done it with more than 2G without problems
-----
CAOC
If what you want is a release this is not a release this is the jailbreak alone.
Release for 3.1.3 at the moment does not exist for 3G and 3Gs
Hello berllin .... if I do the blackrain thing, won't I lose all the applications that I have now from cydia? because that does not interest me ... confirm me if following the steps you give in this post, and having a 2g with 3.0, I can update them without problems ... and I follow the steps ... thanks
Hello Berlin, if it is what you say why while it is connected to the current does not happen that? What is the battery? what do you recommmend me to do?
Perfect, thanks.
Hello
There are three times that I jailbreak and every time Cydia is restarted it does not appear installed. Any other way to install ipa that I don't say via Cydia?
uuuuuu bkn I bought the iphone 3g recently and came
already with firmware 3.1.3
apply this guide and all good I already have sydia and my apps
running on my phone graxxxx and the best thing is that my telephone operator has me agree that not a problem with the release I do not need it
xtf
if you update you lose what you have from Cydia unless you make a backup of all the applications with PKGbackup
---
andrea_venezuela
I would recommend that someone who understands see it and checks it for you, but if it is a battery problem, the 2G is very expensive
---
val
If cydia you can not since to be able to transfer Ipas from the computer to the iphone you need the AppSync that is downloaded from Cydia.
Hello berlin, can I return my iphon to version 3.1.2 thanks
I already did everything .. the vdd many gracsi I don´t know much and I managed to install the cydia .. but my problem is that I have the 3g with the 3.1.3 and I already read it, I can't .. but I can convert it to 3.1.2 and release it is that I need to use a foreign SIM?
I hope you can help me
and again thanks for your page !!!!
CAOC
If you have a 2G: yes
If you have a 3G: I think also
If you have a 3G, only if you liked the ECID certificate through Cydia
———–
Km
Try to install the firmware 3.1.2 and if you get it you pass the BlackRa1n and the ultrasn0w.
firmware 3.1.2:
http://appldnld.apple.com.edgesuite.net/content.info.apple.com/iPhone/061-7265.20091008.Xsd32/iPhone1,2_3.1.2_7D11_Restore.ipsw
Thank you very much, everything came out excellent, but a question?
How do I get the app from itunes to the iphone ??? ..
before with the jaibreack 3.1.2 they passed alone to the iphone, but now they no longer .. TT
What do I have to do ???
Thank you.!
Hi BErlin .. I have an IPhone 3g, I managed to do everything you indicated ok .. but unfortunately how is it with 3.1.3… I can't release the carrier for the phone .. Do you know when this can be done ??? .. since today it only serves me as an excellent IPod Touch !!!!…. xcias ..
Hello….
My problem is this .. I have an ipod touch 2g, I did everything as you indicate but the problem is k cdo I get to the section where it is already indicated cydia does not appear unlock, and I do not know what to do, there if I give it next, just I get “waiting for reboot”, and nothing happens…. I would appreciate a lot if you guide me and tell me that I'm wrong or flat on my ipod you can't… T: T… thank you .. and excellent page ..
Hello
I have a question I am new to this and I have the following problem:
-I have my iphone updated with Firmware 3.1.3 updated directly from itunes.
-then download the Firmware 3.1.2 to the computer, from the link that appears on the page
- then I opened the redsnow 0.9.4, click on "Browser" and select the folder where I unzipped the Firmware 3.1.2 but the program does not find any ipsw file, am I doing something wrong? please can you help me
thank you very much beforehand
salu3
my iphone is a 3g
salu3
Good morning Berlin.
Yesterday I got my iPhone 3GS which has firmware 3.1.3 (baseband 5.12.01) and the iboot is modern. As I am registered in movistar, I do not want to release it from the operator; but if I want to jailbreak it to put other applications on it. Is there a solution, or should I wait?
Thank you
Rod
you have to sync
----
matias
There was a solution if you are lucky and you have Botloader 5.8:
http://berllin.blogspot.com/2009/05/3g-fuzzyband-downgrader-la-aplicacion.html
-----
Rossy
The Unlock is to unlock the iPhone, on the iPod touch It does not come out ...
When you see: "waiting for reboot", disconnect the USB cable, wait for a white screen and reconnect it
------
coldman
If you are already in 3.1.3 you cannot go down to 3.1.2, unless you download the baseband to your 3G, for that you need to have the Botloader 5.8, if not you cannot.
Regarding the file: What happens to you is that your browser changes the ipsw extension to zip. What you have to do to download these types of files is either change the browser or change the extension by hand: Change ZIP for ipsw.
-----
Alfonso
wait and I think a lot ...
I have downloaded the redsn0w 0.9.4 and I have done it to the Ipod Touch 2G but it does not work, I do not know if someone is the same.
Besides when I run it, the redsn0w 0.9.4 does not match the image.
jiizuz:
Enter Cydia and enter manager. You will see an option that says Sources enter it.
Hit Edit and then Add in the pop window insert the following address:
http://www.sinfuliphonerepo.com
Then hit Done. Now go to SINful iPhone Repo and find and install the following: AppSync for OS 3.1.2
With this app you can put cracked applications
Manuel Look at what you say before writing or how you say it, since I had to download the 2 redsnow files from both Mac and Windows to check if they were correct and effectively when opening the 2 applications If they are the redsn0w 0.9.4 .XNUMX, and you've made me waste a lot of time, I don't have it
Hello.-
Ok, I have to wait. And is it possible to create a Custom firmware for version 3.1.3 with baseband 5.12.01, for 3GS iphones with new iboot?
Obviously I can't, I mean someone created it and I downloaded it and installed it on my iphone from iTunes with Shift + Restore
Alfonso
there is no such possibility
If I have the ipod jailbroken with blackra1n, (has it been broken)? I can restore it and do it with the redsnowe ¿¿¿¿
I have my ipod jailbrekado with blackra1n if I restore it and if ??
Clarify that the last two messages signed as Alfonso and Alfonso (2) are not me, it is another Alfonso, or so I think
BERLIN, Thank you very much I tried with many programs but finally I was able, thank you thousand!
Hello Berllin! Thank you very much for answering me… ..
but it turns out that I do what you told me to disconnect the ipod… but nothing happens… I'll be doing it wrong,? ¡? ¡? ok ok I have to do the whole procedure again in updating ok wave? =? =? a greeting
Berlin, after so many attempts I managed to get back to cydia I was hyper desperate but thanks to your advice I did it, thanks for helping us, greetings to all!
Rossy
Do it again:
Change USB or computer port
Rod
There are more sources that have the appSync ...
grass worked great on 3g
berllin you are a machine !!!
Thanks!!! now for liberalization !!!
Hi everyone, I just jailbroken my Iphone 3g with firmware 3.1.3 and everything was fine.
Greetings.
Rod:
Good thing the soure thing worked for you
- ————————————————
berlin:
It's good that you published this post with such a good tutorial.
Thank you very much !!!!!!
Greetings from Mexico
I have an iPhone 3G firm 3.1.3. Redsnow passed and everything ok the jailbreak. But I can't release the carrier! Apparently something went wrong and I updated the baseband !!! Is there a signature to release it or will I have to keep an iPod touch instead of my dear iPhone ??? Please your help.
Thanks
Hello Berlin, I did what you advised me and the version of the iPhone bootloader is 05.09… .. quack!… I understand that with this I am fried and that I cannot do anything until the unlock comes out for the 3.1.3 with the new baseband. .or not ???… there is no other way to downgrade the baseband ???… HEEEEEEEEEEEEEEEEEEEELLPPPPPPPPPPPP
Thanks
Matias
Thank you really uncle thank you very much, I had been looking for a tutorial for days as you have detailed it …… bye colleague take care and keep going bye
Hello, I have carried out the task as it is in the manual and it has worked well for me, although now when I activate the maps option it generates an error: impossible to activate the mobile network¨, my iphone is a 2G, thanks for your help
I have an iphone 2g from att.
I have released and updated it a few times and I have a problem.
When I open the rar file from 3.1.2 and hit brose, there is no file that I can put.
Thank you and I'm sorry
I've already solved it. Thank you.
Although I have a problem and I can not find any forum in which to solve it ...
I have 4 gigabytes that appear in others and I don't know how to delete them. I really don't have any program on or photos. just a little music.
Thank you
Hello hello, excellent post berllin !!!!!!!!!!!!
I only have one drawback, the option to "Unlock" does not appear in redsnow 0.9.4 ……. Please, I need help, my iphone is a 2g ...
matias
I'm sorry, today there isn't
-----
Jeison
You must check the data of your network with the mobile network data of your operator to see if it is correct (it has surely changed you)
-----
paco
Above there is no rar file
This happens because your browser changes the extension of the file that it downloads.
You just have to manually change «rar» to «ipsw»
Once I write I have seen that you have solved it, but I leave it since it usually happens to more than one.
———–
paco
To eliminate the defective files that have remained on the iphone, occupying memory, if you have the Jailbreak you must enter the iphone by SSH from the computer or by Ifile from the iphone to:
/ var / mobile / media
and delete all files called itunes_controlX
Being "x" a number
Leaving the one called itunes_control and the other files that are in the folder
pass the 0.9.3
http://www.megaupload.com/?d=EMEUGZ21
not berllin with 0.9.3 nor does it give me the unlock option, what happens?
eduardo
Only unlock does not come out if it is not 2G
ok, thanks berllin I think I found my mistake… .. I'm going to try again !!!!!! 🙂
EURECAAAAAAAAAAAAAAAAAAAAA¡¡¡¡¡¡¡¡¡¡¡¡¡¡ I FINALLY FIX MY IPHONE 2G AT LAST FINALLY, LAST A WHOLE WEEK READING ARTICLES BUT NOTHING, finally hehehehehe, I have a 2g iphone and I updated it without knowing to 3.1.3 and I was hung up on "insert valid sim", thanks to this tutorial I managed to unlock it and not only that, if not also perform the jailbreack, I just wanted to make a recommendation for those who do not know, when downloading the RAR file of version 3.1.2 .XNUMX must open it with winrar, here is a link to a video that helped me a lot to be able to convert that file into IPSW so that redsnow recognizes it http://www.youtube.com/watch?v=GZkQey-rj1Q, then the only thing is to execute the redsnow and CELEBRARRRRRRRRRRRRRRRRRRRRRR JEJEJEJEJ
Hello Berllin, I have a small problem, I do all the steps but I stop when I search for the fireware 3.1.2 in the folder and it cannot find it, ?? why is it? Thank you
Hello guys, I have already achieved it, thanks to all of you, especially Berllin and Paco, who had the same doubts.
oskar
There is no zip file above.
They are original "ipsw" files directly from Apple
Your browser converts them to zip when you download it
And you just have to manually change the extension «zip» to «ipsw» (1 second)
———–
Marco
Check in the folder where you downloaded it if it is.
If you see it, the safest thing is that the same thing happened to you as Oscar.
Some browsers change the extension in the download.
Hello, I have followed the steps but I know when the program ends on the iphone it gets a pineapple running and says jailbreaking filesystem and it only advances a little bit and then it is removed, what I do previously, I wanted to restore in the itunes but it sent me an error 1013 and it was blocked In the image of the usb and itunes and it no longer entered and this is beginning to scare me that someone will help me I leave my mail: biostar48@hotmail.com
Hello, I have a 3g and by mistake I update to 3.1.3 what I have to do to release it, I have tried this sheet but it does nothing, or I do not know how to do it, can you help me?
Thank you very much, super contribution I have days on the web watching the way to free my iphone 3g and pure bad news, now it works wonderfully with version 3.1.3 thank you !!!!!
Thanks berllin.
A hug
Hello again, I have carried out all the steps and when I complete the only thing I have is a mobile with Wi-Fi, I cannot recognize any card from any operator, I have restored everything. Can you tell me what happens?
japanlife
You have to let it finish, let it restart ...
Start again
By the way I always gave at least the iphone and Baseband, since at certain times you can help faster
------
Michael Cab
You must follow the steps
-----
Michael Cab
This is JUST jailbreak, not the jailbreak of the iPhone for any card ...
berlin.
What program do you recommend to enter shh mode on the iphone.
Because I've tried several and I can't ..
Thank you in advance
Does anyone know when the iphone with firmware 3.1.3 will be released?
Well, I'm not of any use to my 3gs !!! I do not miss my iphone! I know the same! I wish it wasn't updated to version 3.1.3 im out kedado in 3.1.2! much easier the 3.1.2 with l blacra1n! it was a moment to hack it! With this version I am seeing it more difficult ...!
Anyway, I hope to find the solution fast!
Berlin; People like you should always exist, explanations, everything much more than ten, million. everything is ok. Greetings
I use the Ciberduck on Mac. In Windows I use WinSCP
In Windows I think there are better ones, but as I always do well, I have not changed and it is very simple
berlin hello i am from colombia a question i have tried everything they say in the tutorials but the same thing happens to me it stays black and says waiting for reboot what can i do i am about to go crazy my iphone is a 2g
iPhone 2G. Use Redsn0w 0.9.4 to update to 3.1.2 (updating 1st to 3.1.3 as your blog says). All good, but in the end the iPhone was in Recovery Mode !! iTunes tells me I have to reset it. I already tried twice and nothing! Help!
Hello, I want to know how I can download the basbase to a smaller version and the version 3.1.3 to 3.0.1 thanks in case the version of the basbase is 05.12
How can I download the version of the iPhone 3G 3.1.3 basbase 05.12 to a lower help
David
When you get «waiting for reboot», unplug the USB cable for a few seconds and plug it back in to see if it catches you
---------
Lalo
Install a custon firmware that has everything done, just install the custom firmware:
https://www.actualidadiphone.com/2010/02/06/tutorial-jailbreak-con-el-custom-firmware-3-1-3-modificado-para-el-iphone-2g/
------
Fede
You can only download if you have the Bootloader 5.8
But why do you want to go down?
Do you know when you will be able to jailbreak an iPhone 3GS with firmware 3.1.3 ??? ' I am desperate to do it !!
Excellent, I give you a very big one
perfect. Thank you very much with iphone 2g
Thank you very much partners. Another satisfied "customer"
Thanks for this tutorial, it helped me to at least activate my iphone as an ipod since I update to 3.1.3 when the release comes out to use it with any operator
I had lost hope with my iphne 2 g and you saved my life my brother ..
Thank you
1000 thanks
Berlin
If I have my iPhone with jailbreak, and I connect it to iTunes and by chance or error I update it to firm 3.1.3, does the jailbreak remain?
Thanks in advance I await your answer
Berllin AUDAAAAAA !!!!!!!!!!!!!!!!!!!!!!!!!
I did, all the steps you mention in the post to jailbreak, I have a legal 3G iPhone, I updated by mistake to firm 3.1.3 and in theory the jail was done but after the phone is restarted it stays in the apple and a wheel time and it restarts again and again, and again…. etc etc etc ... I do not know what happens I am desperate and help please, thank you in advance
Hello I have an iPhone 3g but I did not jailbreak it xq just when I thought I would update it to 3.1.3 and now what do I do .. ?? Can you still or I already lost the opportunity to release it or I can only use it with the company that I have. ?? and if I do, the same thing would happen to me, willow, I await your comments xfa… thank you .. !!!
BERLIN
very good post I solve hours and hours to release the 2G 3.1.3.
Now I have a query, as I deactivate the EDGE the E k appears on the left hand side above since that internet connection I suppose they will charge me for it.
greetings and thanks.
BERLIN
I downloaded a software to turn off the EDGE, now I found a problem.
My iphone 2g went off and it doesn't leave, it stays stuck in the apple and after a long time it comes out like it's thinking and it stays without leaving.
do you know how to solve this?
greetings.
Hello iphoneanos brothers, it turns out that I already solved my problem hehe…. I was really the one who was doing it wrong since it was firmware 3.0 that was loading, then load 3.1.2 and everything was fine…. Very good post this berllin
Hello, if I had installed the apple firmware 3.1.3 on my ipod touch, I only have to do the jailbreak from step 4 ???
I hope you answer me as soon as possible
Good evening with a query what is the difference between Jailbreak to Firmware 3.1.3 with redsn0w 0.9.4 and jailbreak-to-firmware-3-1-3-del-iphone-con-el-sn0wbreeze-v1-3- ???
Hello berllin. I have gone through all the steps with my 2G without success. The same thing happens to me: “waiting for reboot” hangs at the end. I disconnect it but the screen does not change, in fact it hangs completely and I have to press the two buttons for a long time to 'wake up'. Is there any other system to release it? Thanks for your help.
Greetings to all .. pass my fon from 2.2.1 to 3.1.3 and without any setback, and it is working well for me until now, (micel is 2g) ,, you just have to read well ,,, and thank you berlin for your attention and everyone on the forum, greetings from cd agua dulce ver-mexico ..
Hello, thanks, for the guide, it helped me a lot, now, a doubt, I jailbroken my ipod touch 1g, but I don't notice the change, and I don't know if I did something wrong, or is it that it just doesn't change at all And I would like to know, if there is any visible change when we release the ipod, excuse me, I'm new to this, I would appreciate any information, thanks
Javier
You have to put it in DFU mode and start all over again
-----
Gustavo
It is explained in the tutorial
It cannot be released. LAST SENTENCE of the tutorial, Only 2G can be done
-----
Armando
But you will have to download 3.1.2 on your computer to be able to do it and that your iPod is one of those that support this Jailbreak
----
gerfast
Different softwares.
I keep the redsn0w
----
rookie pericon
Install Modified Software
or install the official firmware 3.1.2 and then pass the Blackra1n to it:
https://www.actualidadiphone.com/2010/02/06/tutorial-jailbreak-con-el-custom-firmware-3-1-3-modificado-para-el-iphone-2g/
—
https://www.actualidadiphone.com/2009/11/04/tutorial-jailbreak-liberacion-y-activacion-del-iphone-2g-con-blackra1n/
different gerfast Softwares
———–
hiram
"Cydia" should appear for you, so that you can install other applications different from those of the AppStore
many pictures many pictures you are the best
tested and certified. the tutorial works perfectly on a 2G iphone .. writing from venezuela !!. Greetings and thanks .. oh and I almost paid for someone else to do this to me .. but I see that it is so simple .. thanks for all the info .. I had already been scared because 3.1.3 did not read my card SIM. and had just bought the phone !. thank you very much!
Sorry but I have a problem, when I am on redsn0w it gets caught after step 8. It gives me a message on redsnow e in which it says to wait for the restart but it does not restart
what I have is an ipod touch 2g
There is no way ... This does not work either. I have tried everything, several times, even changing computers. In some cases it tells me that 'the firmware file is not compatible'; in others it hangs waiting for 'for reboot'. And neither disconnecting it or changing its port or pc has been of no use. Is there any other possibility? The iphone is safe a 2G, I have used it in Paris for more than a year and now I would like to do it in Spain.
Josh
But you have the 2G iPod that can be jailbroken (NO MC)
----
rookie pericon
Write me everything you have tried since I do not remember ..., to see if there is any other possibility
Berlin I thank you for everything but there is no case, I did everything to the letter, it does everything that the tutorial tells me but it does not unlock the sim, thank you anyway… I give up.
Hello berllin.
The fact is that I have a 2G iPhone bought and used in France, which I want to release and use in Spain. In recent times I have done the following to him:
- Jailbreak Firmware 3.1.3 with redsn0w 0.9.4
- Jailbreak with Custom Firmware 3.1.3 (modified) for iPhone 2G.
- Jailbreak, Unlock and Activation of iPhone 2G with Blackra1n with firmware 3.1.2
When I try to restore from iTunes it tells me that 'the firmware file is not supported'; in other cases, when I get to resn0w it hangs waiting for 'for reboot'. And neither disconnecting it or changing its port or pc has been of no use.
Thank you for your patience.
Hello everyone, I have a new iPhone 3GS, with firmware 3.1.3 from factory and with 5.12.01 and MC model. How can I release it and be able to use it with Orange since I am not from Movistar?
Greetings, Berllin.
Just to thank you for this and all the tutorials you put up. I do not know if there are differences between iPhone and iPhone, even if they are the same model, the fact is that your tutorials including this one, always give me results the first time. Again, thank you for the time you spend on us, despite the "ingrates."
My only question for the moment is the following:
Why should the iPhone have FW 3.1.3 and redsn0w works with FW 3.1.2?
In other words: Since at the end of this process, in the information section, the iPhone shows that it has version 3.1.3, do you know exactly what changes redsn0w makes on the iPhone?
Thanks in advance, and if you don't have time or don't want to answer me, there is no problem. With the fact that you have put this tutorial, I am much more than grateful to you.
berllin I'll look at it but in case that was how I could jailbreak it
Berllin I have checked it and it is a MC model, do you know any solution to make it jailbreake?
rookie pericon
A French 2G iPhone does not exist.
The one you have should have already made the jailbrak and release and you could have used it in Spain with any card.
Nothing else had to change the SIM.
From what you say you have already tried everything ...
However, if there is no hardware problem, installing the original 3-1-3, you shouldn't have much trouble with redsnow.
Try redsn0w 0.9.3:
http://www.megaupload.com/?d=EMEUGZ21
———–
birrakas
You can not
———–
Leonardo Murguia
I think it's a baseband problem, but I can't tell you for sure
———–
Josh
Not for the moment…
At last I was able to jail it and release it, (2G 8gig, firm 2.2, baseband 04.05.04_g) I remain in version 3.1.2 with the same baseband, the post was really helpful, I am very grateful ... the internet did not want to work and although it was grabbing a signal ,,,,, nothing !!!!! I read several posts and came to the conclusion of only deactivating the wi-fi and entering again in different wi-fi, I did it and it worked perfect, only that when I got home… .. nothing at all, I did the same and nothing, it that worked for me was to restore network settings ... enter again and that's it ......
Now I am struggling with the cydia apps, some do not run, others run and they do not work like the videocorder3g because I think it is only for 3g iphones ??? Total, I have only downloaded that and I have not been able to do anything else, it is very slow, I lost all the applications that I had but I have been recovering some of the free ones in iTunes because I have an account of course this! but illustrate me to give the operation that should be given to cydia, please !!!!
Well, I hope my experience with wi-fi has been able to help you somewhat.
HELLO BERLIN THANKS FOR THE HELP, HEY
DOWNLOAD THE FINWARE 3.1.2 AS THE MANUAL SAYS, AND IT COMES IN A COMPRESSED FILE, IN THE FOLDER WHERE I DOWNLOAD IT I EXTRACT IT, I HAVE THE REDSNOW-WIN, AND I GIVE IT IN BROWSE, AND I PRESSED THE SEARCH SCREEN AND IN NONE FROM THE K FILES I EXTRACTED THE FIRMWARE 3.1.2 APPEARS TO ME, I MUST EXTRACT IT WITH ANY EXTRACTOR IN PARTICULAR OR BY K IT DOES NOT APPEAR THANKS
buahhh !! I accidentally upgraded to 3.1.3 on an iphone 3g with movistar operator and my baseband was uploaded 05.12.01 and it was impossible for me to jailbreak in any way, neither by blackra1n nor by sn0wbreeze nor by network sn0w. xo finally this tutorial has brought life back to my iphone !!!
Thank you very much for spending so much time helping those of us who do not know!
Hello !!!!!!
hello a question i have my legal iphone on 3.1.3 if i jailbreak it will it erase everything i have? that is to say music and photos or everything is as is?
I await your answer, thank you !!
Wow, berllin, there you have left me crushed ...
Where do you get that a French iPhone 2G does not exist? I bought mine in Paris more than two years ago and I have been using it there with Orange all this time until I returned to Spain three months ago. 3G is newer. The pre-mine model - 1G I guess - was very different.
How is a 1G distinguished from a 2G and a 3G? Mine has 16GB, plastic casing, does NOT make video and is the MB496NF model, in case it tells you something. THANK YOU
Good morning I have followed all the steps and I have installed cyntia on my iphone 3 g 16gb 3.1.3, and I tried the ultrasn0w to free sim and now it does not work for me with any sim, it is looking for a network either with movistar or with vodafone.
has someone found the solution?
I read the steps in:
http://www.redmondpie.com/unlock-iphone-os-3.1.3-firmware-9140419/
Thank you
hello when i open redsnow and try to install version 3.1.2 an empty folder opens which file to install when i give browse i can't find ipsw or i can't someone can help me thanks
berllin, you were right, it is a 3G (it also browses on 3G networks). I'm a dick ... Anyway, sorry for getting dizzy.
I have jailbroken it according to this tutorial and everything has been cool. What I don't quite understand is that you say at the end of the tutorial that to release it he will have to wait, and yet you told me in the last post:
"The one you have should have already carried out the jailbrak and liberation and you could have used it in Spain with any card."
Do you mean that it cannot be released?
In any case, thank you, as always.
Thank you very much Berllin you have saved my life. It only remains to be able to release the SIM. But hey, wait
Diego:
install firefox on your PC so that when you download the file with ipsw extension you can archive it as is, I had the same problem, try it. It is also worth mentioning that even though I wanted to install it, I did not recognize it so I had to put the one that is not customized, but try it yourself and talk later!
regards
HELLO MY SELF, THANK YOU K YOU THAT VIU VIDEO IN TOUTUBE AND IF YOU DOWNLOAD IT AND DOWNLOADED IT WITH WINRAR YOU WILL GO TO FILE AND GIVE IT SAVE A COPY AT THE END OF THE NAME YOU PUT IT POUNTO IPWS AND IT ALREADY RECOGNIZES IT, NOW ONLY MY PROBLEM IT IS THAT I DO NOT READ THE SIM I THINK I WILL HAVE TO ESERATE THE 3.1.4 TO BE ABLE TO BE ABLE TO LIVE IT NO OR YOU WHAT DO YOU KNOW ABOUT THAT THANKS
Thank you very much.
I have no choice but to update to 3.1.3 and I haven't been able to jailbreak it until this tutorial. I have an Iphone 3G 16 gb Model MB Movistar of origin and this tutorial works.
Eskerrik asko.
DIEGO
The firmware is not compressed. in fact the link is to the original Apple file.
What happens is that your browser when downloading it has changed the extension.
By hand, simply selecting the name, the extension is changed to ".ipsw" and that's it. It's very simple.
They only have problems in doing this, those who have configured files with the hidden extension, which must be displayed.
----
bertinillo
It can be jailbroken, but not released unless you have the Bootloaderr 05.08:
https://www.actualidadiphone.com/2010/02/10/fuzzyband-3-1-3-1-aplicaciones-cydia/
----
alex
e normal you will not lose anything, but just in case all you have to do is previously synchronize with itunes so that itunes saves everything you have and when you finish with redsnow, you will synchronize again if you had deleted everything and recover everything you had through itunes.
----
QUIZIN
A 3G with 3.1.3 you cannot release it unless you can download the Baseband. Look at the same thing that I have put to bertinillo, two answers above in this same comment
----
SEBIX
You can only know where you have downloaded it
-----
rookie pericon
Sure because you claimed you had a French 2G. As there are no French 2G iPhones, I assumed that you had a 2G from the US and that it was of course released.
I couldn't imagine an iPhone owner being confused about which iPhone he has.
Having a 3G you should not have done this tutorial if you wanted to release it, since 3.1.3G cannot be released with 3, unless as I said a few lines above that you have a 05.08 Bootloader (those are the first 3G)
------
Hello berllin
I try to follow your advice but in numbers 2 and 3 I don't know whether to download the Firmware for iPhone 2G or 3G, as I said I have it very recently and the only thing I know is that it is 8GB.
Thanks for your help
Buuuu I cry, I don't know what happens I've done this many times but I can't get past step 8, it's the first time I want to jailbreak my iPhone 3G and I don't think I can put it in DFU mode. Any suggestions ???
Thank you very much Berllin, I have followed the steps of the link that you have sent me and buala, I already have the cidya in my cucumber. I had done the same on other occasions but today 11/03/2010 it took effect. Again thanks.
Thank you very much Berlin
This afternoon I try it and I will tell you how it went.
What applications do you recommend as essential on the iPhone?
Thank you.
Well too bad, because I have Bootloader 05.09. We will have to wait ... or maybe I should despair? Do you think I would do better to sell the iPhone to some French?
hello friends of current iPhone my question is the following update an iPhone 3G with jailbreak to 3.1.3 and I can not release it. Beforehand thank you very much
many grax berlin very good tuto greetings from mmeexxiiccoo
facial expressions
How is the iPhone behind? Can I give you a clue if it is metallic with a black plastic bottom: 2G
Anyway the iphone can only install yours so no problem you can try one or the other
-----
Jonathan Leon
http://berllin.blogspot.com/2008/11/modo-dfu.html
----
rookie pericon
If they buy it, well yes
----
Fritz Fisher
It is already said many times, 3G can not be released with 3.1.3
----
Well that means that I lost my iPhone with 3.1.3 because they already tell me that I cannot release as Aryan to do the release
berlin friend is in waiting for reboot I no longer turn on, I disconnect the usb and the screen is not blank, how do I do it?
friend I have a problem when I try to jailbreak the firmware 3.1.2 that I give it browse and I click the redsnow it tells me "unable to recognize specified IPSW" what do I do?
Hi, good, download the files you mentioned above to update the iPhone 2g, mine was blocked, as I updated, I did the next step, I opened the ytunes, I put it in dfu mode and the restore appears I want to select the file to restore to version 3.1.3 and but The file with the .ipws file is not there, what do I have to do or what waves do I not pass from there, greetings, thanks, I hope help, please
damn 🙁 my iphone shit everything does not come out IMEI
ICCID DOES NOT EXIT
NOR THE FIRMWARE OF THE MODEM
THE BLUETOOTH OR WIFI DOES NOT COME OUT: S
SAYS VERSION 3.1.2 (7D11)
NETWORK NOT AVAILABLE: S
EVERYTHING WAS CURRED UNDER THE LAST VERSION 3.1.3 BUT I WANTED TO RETURN IT TO 3.1.2 NOW IT WAS ALL EVEN FOR IPHONE TOUCH IT SERVES ME:
I just did it as you have mentioned berlin and it has come out perfect in 10 min I already have cydia on the iphone 3g.
Thank you very much, you are teachers. I am always reading the blog and it is my favorite.
THANKS!
Hello Berlin,
I have a 3GB iPhone 16G, by mistake my girlfriend updated the firmware from iTunes, the issue is that I keep the firmware 3.1.3 and with the baseband 5.12.01, the issue is that the equipment is only active for the MOVISTAR company , which does not complicate me since I currently use a data plan with them, the issue is that I can not jailbreak ... I followed your steps to the letter, but it stuck in waiting for reboot ... I have tried everything , I tried changing them in all the USB of my notebook, I tried in my PC in all the USB, but even so I still get stuck in that part and the jailbreak is not performed ... I WOULD BE THANK YOU TO HELP ME ...
GREETINGS FROM CHILE!!
Thanks berllin. You've bailed me out so many times that for once I can't solve my problem, I can't complain ... hehe.
You are the best, really, I don't know where you find time to attend to everything and everyone. I love the forum and I follow you unconditionally. THANK YOU!!!
Thank you very much for the tutor. Made with iPhone 3G 8GB and working perfectly. Thanks
Berlin
What do you think is true of the following:
http://iphone-thunderst0rm.blogspot.com/search?updated-min=2010-01-01T00%3A00%3A00-08%3A00&updated-max=2011-01-01T00%3A00%3A00-08%3A00&max-results=12
I'm desperate with my iPhone 3G
3.1.3
5.12
5.09
I want to release it !!!!!!!!!!!!! 11
Thank you
when will you be able to check in the 3rd gen. ????
Could you tell me on which page I could download the software when it was released for the 3rd generation of the ipod touch-thanks
bootloader links don't go
hello berlin!
I try to install this jailbreak but iTunes says that the SIM card is not compatible, I have tried with all the operators and it does not work with any 🙁
I would really appreciate your help
Thank you
Berlin, how can I download applications from iTunes with 3.1.3, I have an iPhone 2g and it won't let me do it and with the appsync it doesn't work for me.
fritz
You can only release it if it is a 2G
----
ricardo
What iphone are we talking about?
---
July
If the firmware is not recognized, it means that you have not downloaded the correct one or that your browser has changed the firmware extension ".ipsw".
Check that you have the correct extension.
----
carlos ireta
The same as in July, your browser changes the extension in the download, you only have to change the one you have to ipsw.
----
coco
What iphonen is it?
What firmware did you have?
———–
Vincent Malloy
When you get the error, at that moment try with IREB:
http://ih8sn0w.com/index.php/welcome.snow
———–
QUIZIN
It seems to be a fake
Anyway the DevTeam seems to be close ... patience.
———–
kroner
Try them hour
-----
facial expressions
this is a jailbreak, not a release
----
byron
Applications are downloaded as usual.
But I imagine that what you want to download are cracked IPAs
See if it works for you:
http://www.youtube.com/watch?v=zbjpdLQu0u4
How do I know if an iPod touch is 2G MC or not? Thank you.
Hello Berlin I hope you are well.
Look, I have a 2G iPhone, I have done everything you say and the applications run perfectly, the Wi-Fi anyway ... but the utility as a telephone does not work (calls, messages etc)
Greetings from Colombia
What could be happening?
Hello, does anyone know why my cydia does not load ?, that is, it goes to the home screen and when it is loading it returns to the spring board.
If I install black ra1n it damages my iphone or cydia finally works, can I reinstall cydia without losing all my applications?
WHAT I DO!!
Greetings berllin, congratulations on your blog, I am trying to jailbreak an ipod touch 2g 3.1.3 and it is waiting for reboot, I have disconnected it several times, I have done it on several computers and nothing at all, it remains in the same. Have you found any other solution? Thank you very much
HELP !!!!
I need the link for the Firmware 3.1.2 for the ipod touch 2g because I do not want to grab the ones that I download elsewhere ... please, just the link.
Help
in the first step I already get that error 13 cannot be restored
chufirulo
https://www.actualidadiphone.com/2010/03/16/f0recast-1-1-%E2%80%93-actualizacion-software-para-windows-%E2%80%93-informacion-util-para-el-iphone-e-ipod-touch/
----
Jose
Try redsn0 0.9.3:
http://www.megaupload.com/?d=EMEUGZ21
----
Yo soy
Restart the ipHone to see if it is solved
----
epsilon
First of all tell you that this blog is not mine, I just collaborate ...
You have verified that your Itouch is No MC, if it is MC you cannot do it:
https://www.actualidadiphone.com/2010/03/16/f0recast-1-1-%E2%80%93-actualizacion-software-para-windows-%E2%80%93-informacion-util-para-el-iphone-e-ipod-touch/
------
carlos aldana
I do not have it since Apple is blocking them
-----
Dear berllin can you help me with some tutorial to put my iphone in dfu mode without pressing a button since the on / off button does not work for me Thank you very much
Thank you, everything worked to the letter, I am writing to you from my 2G that was blocked for a while, good luck and thanks again
Joao
I don't have anything like it.
Berllin ... help me then how am I going to jailbreak my ipod touch 2g model not mc ...
Because apart from that I have another problem, as much as I press SHIFT and click on restore, I don't have the option to choose the firmware I want to install ... (I have Windows) .. any ideas?
Thank you
carlos aldana
If you can't find the firmware online, you'll have to buy it.
In Windows, this is the way to install any firmware that you download to your computer
Berlin thank you very much for the information but my power button does not work so I think I will not be able to jailbreak with those steps, do you know in some other way? Or maybe how to fix the button yesterday I uncovered it and what I was able to fix was a loquera that kept turning off and restarting but the button still does not work and here in Guatemala I have not found someone to fix it except the place where I buy it » ishop »those slobs don't know anything. I wish I was here!
Salu2. I have an iPhone 2g, I updated it to 3.1.3 and I could no longer enter anything or even make calls, well, I did not have a signal bar, I did the tutoring step by step and everything normal, but at the time of Putting my chip tells me that there is no service, I went to telcel (cacacel) Mexico and they say that it is not possible and there is no way or with hack or anything, please help me that I already restore it I do not know how many times and I did everything of the tutor, but nothing, my iphone is 2g, I restored it to 3.1.3, I did the tutorial, but it says that there is no system, it has no signal nor does it recognize my chip thanks
HELLO BERLIN GOOD MORNING, I HOPE YOU CAN HELP ME, I TAKE MY IPONE TO A PLACE TO BE RELEASED BUT THEY COULDN'T AND THEY LEFT IT LOCKED, I JUST APPEARED L ARROW, I MADE THE JAILBRAKE TUTORIAL AND IT WENT OUT GOOD NOW THAT IT WAS NOT SO GOOD EVERYTHING AND RESET, APLE APPLE APPEARS AND THERE IT WORKS NO LONGER IT LIGHTS UP WHAT I COULD DO, I WAIT FOR YOUR ANSWER, THANKS.
Alfonso Mexico
Instead of installing redsn0w 0.9.4, install 0.9.3 and test it:
http://www.megaupload.com/?d=EMEUGZ21
-----
DIEGO
In order to answer you, I need to know what iPhone you have, what firmware you had and what Baseband
How about everyone, I have my iPhone 3G, the jailbreak was successful, the only drawback I have is that it does not detect my sim card, only the bars of the signal are empty and there it stays, which could be help me!
Hi Brizy, I live in Guatemala, I have a friend who repairs iPhones, mine has made me that the speakers broke, one of my friends made up his iPhone that had a bad chip slot, and another friend I changed the touch screen Since he had broken it, he would gladly fix yours, it is through the proceres shopping center, if you need the address I will send you by mail you can contact me at my email is gerson.valdez@yahoo.com
HELLO BERLIN THANK YOU, I HAVE AN IPONE 3G, THE FIREWARE IS 3.1.3 AND BASENBAD 5.12 HAD UPDATED IT BECAUSE OF LOHE PODIDO LIBERA AND I TAKEN IT TO A PLACE BUT THERE WAS WHERE THEY LEFT IT WORSE
I RUN THE REDSNOW 0.9.4 BUT AND IT LOADS IT BUT AFTER IT RESETS SOO IT GETS STOPPED IN THE MANSANITA AND FROM THERE IT DOES NOT PASS I HOPE YOUR RESPONSE AND THANKS
Hello Berlin I have an iphone 3g and I did an update with itune to 3.1.3 with the baseband 05.12.01 after that I tried to do the jailbraek with all the programs that exist but nothing works for me please help me I am desperate.
Hello Berlin. to see if you can help me.
They just brought me from the USA an iPhone 8gb 3G which I bought original and released (it cost u $ s500)
brought me the firm: 3.1.3
baseband: 5.12.01
boot loader: 6.04
after burning my eyes a lot reading on the web.
I managed to jailbreake with redsn0w using firm 3.1.2, install cydia
then i ran the blackra1n and the ultrasn0w
The operator already recognizes me but I am still looking for networks and until there I get ... I think I am a little step away but I am missing that.
Another thing if I use the blacksn0w it hangs and does not lift the iphone anymore .. it remains in manzanita.
well I hope you can help me. since I spent a lot and I cannot use it and in local market I could not buy it due to lack of stock.
regards
Hello I have an iPhone 2g I followed all the steps and it works fine, however now the iPhone does not recognize the speakers where I heard it, what can it be? Thanks
hello good, I have a 3gs 32 gb released by imei, can I do the jail or it does not work for the 3gs. Thank you.
Gentlemen it worked perfectly with my iphone 3g firmware 3.1.3 baseband 05.12.01 and bootloader 05.09 ... we know that this tutorial is only for the jailbreak there is still no release, but at least I already have my iphone working as an ipod. for reference only
Hello, how have I done everything, I have an iPhone 2g… but I don't get the unlcok option…. ???? what do i do
Good evening, please your help: I am trying to do the steps mentioned in the tutorial but the failure is the moment of putting browse in the resdnOw I DO NOT RECOGNIZE THE FILE THAT DOWNLOADS FROM THE FIRMWARE 3.1.2 I guess it has to do with the extension archive.
It is as if there was no file, the firmware folders appear, but when you click on them using the browse, it is as if they were empty.
my iPhone is 3g of 16 gigs with version 3.1.3
Your help please.
RONY:
YOU MADE A COPY OF THE K FILES YOU DOWNLOADED WITH WINRAR BUT WHEN YOU SAVE THEM, PUT A POINT AT THE END AND IPSWY ALREADY DETECTS THEM
And I followed the steps but the fireware doesn't even recognize me, I don't know what to do, previously I had it released, but when updating I lost everything and when recovering ps worse ... thanks for your help
Gentlemen it worked perfectly with my iphone 3g firmware 3.1.3 baseband 05.12.01 model MB496LA ... we know that this tutorial is only for the jailbreak there is still no release, but at least I already have my iphone working as an ipod.
Hi, why didn't it work for me ??? the first time it got stuck in uploading ranmdisk with version 0.9.4 and the second time it got waiting for reboot ??? in version 0.9.2 = (what can you recommend ??? help !!!
I have a prob, I have an iphone 2g in version 3.1.3, with the firmware of the 04.05.04_G modem, I had never had problems with the wifi, until about two weeks ago, it connects but the connection drops and it returns me to the Edge , I thought that when I updated it to 3.1.3 it would be removed but still ... what do you recommend?
Now the jailbreak only works for when the phone is on and if I turn it off and turn it on again, do I lose the jailbreak? on the iphone 3g
Great I achieved it after days of trying and nothing, because when I downloaded the firmware I did it with .zip I changed it manually to .ipsw and saved it on the desktop and when it was downloaded the itunes icon appeared, I followed the instructions and everything was fine ! I already have the internet tethering what I wanted! .. thanks berllin !! x true for those who have had something similar, mine was with an iphone 3g with telcel mx!
I do it but after I load the firm 3.1.2. nothing happens! I tried to do it like 3 times and nothing, can someone help me? Is fimr 3.1.3 left without cydia or anything I do?
thank you so much it worked wonders with my 3gb iphone16g 😀 😀 😀
I tried the snow and that didn't work for me, thank you very much!
Hi ... I have a problem ... when I open redsnow and put the firmware 3.1.2, I don't go from there, the message that says is: IPSW successfully identified.
What do I do? ... I have not done previous updates, I had done it without a problem, it helps that I'm without a phone ... Graciiasss
Hello Berlin, I have a 2G iPhone, two weeks ago it just turned off and won't turn on again, only the little apple appears and nothing else, the screen turns Black. I connect it to PC but iTunes doesn't recognize it, so I can't restore it. Any ideas?? Thanks!
Hello, I was trying to free an ipod touch 2g (not MC) with redsnow and it was waiting for reboot .. and the screen was black, I thought I had scrubbed it but I used an application called snowbreeze-v1.4 it has a help option - DFU mode .. and following the steps I managed to leave it as before passing the redsnow, the 0.9.4 did not help me, I hope that the 0.9.3 yes .. I am commenting on anything
I just finished trying a second time with redsnow 0.9.3 and unfortunately the jailbreak did not work, but I still have the ipod as before I tried it .. by the way after I applied redsnow the screen went blank, the only thing I did It was to press the 2 buttons and voila, I restart the ipod normally .. I do not want to pass the blackra1n because the ipod belongs to my nephew, the little man with the mania that I doubt will not turn it off, tons to turn it off would be fatal .. well any advance I keep commenting .. bye
Hello Berlin,
Well, the same thing happens to Coco, that is, my iPhone 2G had the fw 1.1.4, I have changed it to 3.1.3 following the steps you indicate and now it does not detect any operator (it appears as not available) and the phone number as unknown.
My operator is Orange (MásMóvil).
Hello, how are you, a query, I have an iPhone 16gb 3g touch, I downloaded the update of the itune without knowing and I misconfigure it now every time I turn it on, I get the icon of the itune and the usb cable which I think with this I can restore or I am ekibocado on the other hand I already have everything downloaded from this tutorial which when I open the itune and look for the file to update it does not find it, I mean I look inside the rar folder. On the other hand, I have downloaded it from the other side and it is like an executable folder but it is not the correct version, it tells me I hope you can understand me, the truth is I am wrong because I only used it for 1 day on the iPhone all because I had no idea about the itune 😛
I mean, inside the iPhone1,2_3.1.2_7D11_Restore folder I have other types of file that the itune does not take as an update, there is to do some type of process or something like that so that I can take it so I can update
Hello Berllin; I extend my previous post regarding that after uploading to 3.1.3 from 1.1.4 my iphone 2g has no coverage:
the baseband is 04.05.04_G and I have seen that when it reboots after finishing the redsn0w.094 a box appears with an error message that lasts 1 second and in which I have seen in the last line the name of the bl46 bootloader. bin and something like can't find it or is in error.
The issue is that the ones that I put for it to unlock are the ones that come in this tutorial and are bl-39.bin and bl-46.bin.
Looking online I have seen that there are different bootloaders of other sizes and with - and without -.
What bootloaders do I put if the ones I have don't work?
My iPhone already had me out of adjustment but with this procedure I have verified that it works, since I followed them to the letter.
I tested it on an iPhone 2G. 100% that if it works
I have a problem with an iPhone 3g 8gb at AT&T in Puerto Rico and it came from the factory with 3.1.3 and I would like to know if you can Jakia to put free programs and an app on it, please help me or at least get me out of doubts, or How can I lower it to 3.1.2 if possible because I already tried itune with iPhone3G.3.1.2 but it did not work I repeat please help me or at least get me out of doubts is it possible or not ADVANCE GRASIAS ………………………… ..
Hey, sorry, I installed it and everything, but the sim did not grab me
QUE PUEDO HACER
Hello Berlin, look, I update my iphone 2g to 3.1.3 and a usb cable appears on the main screen and the itunes logo when I connect it to the computer tells me that you don't have a sim and if I put one it tells me that it doesn't recognize it I have to get one from the official server.
How can I activate it and be able to add the programs that I have downloaded from the page?
Since it does not give me a chance to even restore it
Hello Berlin,
I want to Jailbreak my iPhone bought in HK and free from the factory.
Its data are:
version 3.1.3
Baseband 5.12.01
Iboot: 596.24
iTunes new version 9.1.0.79
Can I use this tutorial? Can the new version of iTunes be a problem?
Thanks in advance
slink put it in repair mode and then conestalo to itune it is possible that it is fixed xq to mine 3g happened after trying to give it a Jailbreak that does not work only t allows to make emergency calls restore it and then it is supposed to be fixed ……… ………………………………………………… ..I hope it helps you
X FABOR GET ME OUT OF DOUBT I have a problem with buy an iphone 3g 8gb at at & t in Puerto Rico and it came from the factory with 3.1.3 and I would like to know if you can jakia to put free programs and app on it, please help me or at least get me out of doubts, or how can I lower it to 3.1.2 if possible because I already tried with itune with iPhone3G.3.1.2 but it did not work I repeat please help me or at least get me out of doubts it is possible or not ADVANCE FATS ……………… ………… ..MY EMAEL IS NVCDRAGONPR@MSN.COM THEY CAN IN GOOD IF POSSIBLE OR AS ASERLO GRASIAS AGAIN MIND
Let's see now if you can explain it to me with apples because I'm a little lost in these directions! Ha Ha Ha… How do I put it in repair mode ??? oSEA already try to download several programs to activate it but none have worked yet. I wait for an answer, I just want to activate it to be able to jailbreak because I connect it and it does not recognize anything at all, only the legend of the original chip that I had to bring appears and I do not know how many lies ... I am waiting for answers and thank you very much in advance by the way I have a 2G 8gb
HELP ME !!! I HAVE AN IPHONE 2G WHEN I GIVE THE BROWSER BUTTON, I LOOK FOR THE FIRWARE 3.1.2. AND WHEN GIVING OPEN IT APPEARS IN WHITE, THEREFORE I CANNOT CONTINUE UPDATING.
NOW I HAVE THE IPHONE TOTALLY UNUSED, PLEASE HELP (I'M A NEWBORN)
THANK YOU!
Genial.
I mistakenly upgraded to 3.1.3 with the new baseband 05.12.01 and I was able to do the Jail.
Greetings and continue like this!
slink is pressing home and the start button for a couple of seconds until the pants turn white and then you connect it to itune and install the question. again. at least it worked with mine, luck with that, I hope you whistle
Excuse me first hold down the start button x 3 seconds then without releasing it press the hom button x 10 then release only the start button and keep the home button for 30 seconds plus all this without releasing it first only the upper start button 3 then both ensd . home. x 10 sec lucky only the teaching. while holding home tight x 30 sec. I mean, a total of 43 sec. more or less until it is taught with the itune symbol and the cable then you conestas it and itune takes its own thing …….
Excellent now if I managed to get it to enter iTunes now I have another problem since I opened the snow and I give it to load the applications it stays in waiting for the reboot and it does not do anything I saw that I have to squeeze the buttons on, off and on home but it does not say how long if someone passes the times to me it would be great and cool vodoo if your technique served me !!
Look, I read the whole post and the truth is, I get the same thing. I have an iPhone I think 3g because it is all 16 GB metal, and I put it in my hp pavilion and in an accer spireone both with w7 and I get the same WITING FOR REBOOT . I did everything you said and it doesn't work for me. WHAT DO I DO?
'
'
slink I'M HAPPY LUCK WITH THE OTHER PROBLEM IF I FIND OUT HOW TO GIVE YOU HELP, I'LL LET YOU KNOW AND YOU ALREADY KNOW KI YOU HAVE A FRIEND FROM PUERTO RICO HAVE A GOOD TIME …… ..
they are all fucking! suck my cock!
maracosa cats! sucks years! why don't they go to the rotten leprous shell of their late and badly raped mother!
ahhh and shell worm! for the deceased….
Hello! I have 1 2g, and I want to know if it works even if I don't have a SIM card? My phone says: "no sim card installed, insert a valid sim no PIN look to active iphone"
I have an iphone and it had the appSync of the 3.1.2 and it allowed me to put the applications to itunes and from there to synchronize and they were passed to the iphone.
now I have the iphone at 3.1.3, what do I do? nothing else INSTALL the http://www.sinfuliphonerepo.com ?? and I'm looking for the one that says AppSync for OS 3.1.2 ?? even if mine is 3.1.3 ??
IN BERDAD THE REDSNOW 0.9.4 FUNCTIONS THE ONLY PROBLEM IS THAT IT DOESN'T BLOCK BUT IT IS A STICK FOR OFFICIAL COMPANIES AND JACKIEL AN IPHONE 3G 8GB FATS JENTE HAVE A GOOD TIME …………
Hello, very late afternoon, every time I am in the final 30 seconds to exit the screen or it is put in the toolbar (this usb device can work faster if you change the port etc, etc) and it does not let me finish to do the jailbreake I have a laptop and I already put them in the 3 ports and every time I keep getting that avso which does not leave me and I am constantly restoring the iphone thank you very much
Can you help me
I've been with it all day since the morning and it doesn't give me
salu2
salu2
Hello, thank you very much I tried different ways and none worked for me. Now I have my iphone 3g with 3.1.3 and with cydia
Marco, how can you tell me, I am taking a downgrade to return to 3.2, see if I have it as before
I have a problem, download everything, restore my cell phone, but when I go to redsnow when looking for firmware, it doesn't appear to me, the blank folder appears ... what do I do? please
Good morning guys. Hey, I'm new to this.
I have downloaded all the software and what the tutor says.
but when i put the iphone in DFU
And the software is being installed, it stays on the screen of installing the
unlogin rampdisk
and then it stays there and if not I have to restore it in iTunes so that it can pull,
It takes a while or I do not know if to leave it there
just change the file extension.
with right clip change name and put .ipsw
and ready
hello how are you i need help please rrrrrrr
I have an iphone 3g and I updated it to 3.1.3 and now it appears
connect the iphone to itune ... and only call from ergmegercia
I want someone to help me ... unlock the iphone ... ... I followed all the steps that have been indicated to me but it does not work ... when I try to do redsn0w 0.9.4 and I put it in dfu mode ... ... my iphone ceplende the black screen and do nothing else ... but not as it should? it does not show me the hard drive ... nor even the pineapple loading !!! someone help me
Thanks, everything Ok….
Thank you men I just want to have cydia and now I have it muxas thank you I did not care if I released it only the cydia thanks again
muxas thanks !!!!! The first time I had to pay for my cell to be released, now I did not spend a penny! It is very easy and simple to perform the release!
I have already released 3g baris from my friends this is a stick as we wanted in PUERTO RICO ,,,,,,,, THANK YOU FROM BERDAD ,,,,,,,,,,,
I NO LONGER PAY INTERNET AT HOME NOW I CONNECT THE LAPTOP TO THE WIFI OF THE IPHONE WITH AN APPLICATION THAT DOWNLOADS PO CYDIA AND ALLOWS ME TO USE THE 3G OF AT&T PR GRASIAS DE NUEBO
GRASIAS BERLLIN
voodoo have you released or unlocked? you can say the firmware number, bootloader. Thank you
I would like you to help me with some sources for cydias that have games and applications that appear on itune for fabor tell me that ource from cydia are the best I am interested in downloading audio books in Spanish for fabor help antisipadas thanks ………………… ………………………………………………………………………………………………………………………………… …………………
Sorry I mean the Jailbreak sorry my bad didast ...
Hello everyone. I have an iPhone 3G and it does not have the jail, it is prepaid but my doubt is that when I enter the balance it connects itself to the network and in a matter of minutes the balance is finished, will I have to do something?
If someone knew XFAVOR could tell me about this or what do I have to do or is it missing the jail .. ?? Thank you in advance and what a good forum
Hello friend, what happens is that you are browsing, prepaid and what you have to do is buy a plan for navigation only, then you go to your operator and he supplies you with the access point, you copy it in adjustment, general, network, point access the password and the password you leave it blank and that's it
The access point for you in Colombia is web.colombiamovil.com.co
luck
Good morning Berlin and greetings from El Salvador, notice that I have a problem, a friend gave me the iphone to fix the wifi and I as inventor updated it to 3.1.3 with the 5.11 baseband and something (the newest) did not me It matters to unblock it, I just want to jailbreak it, but when I pass the redsnow to it, everything goes well, only the problem of many that only the apple comes out and does not go from there, after a few minutes it restarts and again the same finish.
Please answer me and tell me what is the error I have because I am desperate because my friend is angry, the process I have to do isn the chip? or can I try to put OS 4.0 on it? Please take pity on me and answer my problem, thank you, the phone is an 8 Gb #G
Sorry I did not put the number is a 3G of 8 gb
I would like you to help me with some sources for cydias that have games and applications that appear on itune for fabor tell me that ource from cydia are the best I am interested in downloading audio books in Spanish for fabor help antisipadas thanks ………………… ………… x FABOR
Good morning, I bought an iPhone 3G 8GB but when I opened it and tried to apply the blackra1n to it, the blackra1n program failed to find a file (asl.dll) and well then I tried to update the firmware from iTunes to 3.1.3. and almost at the end it marks an error (20) that cannot be updated and it turns off, and when I turn it on again the itunes logo and the USB appear and from there it does not happen, hopefully and you could help me, greetings and excellent day.
How about Berllin, I did the whole process and everything was updated, but the SIM does not recognize me, I have a 2g firmware 04.05.04, how can I solve the problem. Thanks a lot.
Hello, I have an old iPhone, not 3G. Brought from USA two years ago. It worked more or less well and today I tried to update it with a tutorial, but something has gone wrong ... Now all I see is the drawing of the USB cable and when I connect it to iTunes it tells me that I do not have the original sim, therefore I cannot give it to the "restore" button because this button does not appear anywhere.
What program can I download? What steps should I take? Is that in several places where one of the first steps entered is "go to itunes and pressing shift + restore, look for the blablabbla file ..." I can't do that.
PS: For what it's worth, the last version I had was I think it was 3.0 (since September 2009).
Thank you
marinafbc@gmail.com
Greetings Rsza… .. Berlin
A question
When you are doing the jail ... you have to remove the SIM.
it's necessary ….
Thank you.
someone already knows if the iphone 3g firmware 3.1.3 modem 05.12.01 and bootloader 05.09 can be released
I have an iPhone 2G from the USA with v.1.1.4 for 2 years, I have followed the steps in this tutorial (I have restored with shift to v.3.1.3, I have opened the redsn0w 0.9.4 I have unlocked I have entered the BL-39 and BL-46 but the SIM does not recognize me When it finishes loading the pineapple, it gives me this error: «Couldn´t find all required files.Please check your installation for bl-46.bin» «Automode reboot Cleaning up before reboot ". I have read all the comments from everyone and I did what you recommended to Jose, try it with the redsn0w 0.9.3 and it remains the same. What else can I do ... Thanks
why when I press the browse button and select the firmware it does not detect the content ... and ps it does not let me open it ... it only detects them as a folder ... did I make a wrong step? .. my iphone is 2g and it already has version 3.1.3
I already tried to change the zip extension to ipsw but I can't…. komo zip file keeps appearing… it helps pliiis. !!! Thank you
Hello Berlin and everyone.
Does anyone know if you can already unlock an iPhone 3G firm 3.1.3 ???? I already did the jailbreak and everything is ok. But I need to unlock the carrier !!! Please help if anyone knows if you can already
Hello, you see I did everything as you indicate in the tutorial, I downloaded everything and in fact everything went well but in the end it does not accept any simcard as before doing the procedure (my iphone is a 2g by the way), I was not supposed to accept any operator after doing everything ?, what happened to me I am desperate to use my iphone 2g now, please help me !!!! ...
Hi Ricardo
I was just like you, and seeing that nobody answered me, I followed this other tutorial https://www.actualidadiphone.com/2009/10/14/tutorial-jailbreak-con-el-custom-firmware-3-1-2-modificado-para-el-iphone-2g/Now it works for me, I have version 3.1.2 not 3.1.3, but at least I have a phone again and even a video camera. Later when I have more time I will try to go up to 3.1.3.
Good Maria, I'm going to try that tutorial to see if it works for me, let's talk, I'm interested in keeping in touch with someone like you, so we can help each other, give me your email to add you to msn.
what's up, thanks muxas, thanks for this tutorial, it saved my life
I had three months without i phone
and I did not know what to do but
thanks to this tutor
He returned to life
thank you again
really
Hey, I did the steps, I have the 3g and I have the apple now, what do I do?
hello .. thanks .. and the firmware3.1.2 you can find it on the megaupload.com page, in case it works for someone .. trout, tijuana for the world
OK this tutorial is super, but don't let it happen to them as I thought it wasn't working for me and after all, everything was fine, what happened to me was that the internal radio card was bad and I had to send it to change.
Greetings berllin you are the maximum 100% I release my iphone 3g. My iphone was only on emergency calls and I couldn't activate it even with an at & t sim card. I did all the tutorials with snowbrezze and I got a communication error then I used the ireb and I got another error. I did this tutorial and I activated my iphone perfectly and it is released with cydia, but the unlocking is missing to put any sim on it. but I know I have to wait, at the moment I will play with the wifi and the ipod, thanks berllin, as long as you know how to unlock it, publish that tutorial.
I already did all the steps but I get redsnow ´´waiting for reboot´´ and the iphone screen stays blank, what do I do, please help me….
Hello Berlin I have an iPhone 3.1.3 with the 05.12.01 I already released it and I already have cidya; under the fuzzyban 4.0 ~ b-1 and in a tutorial seen the fuzzyban 3.1.3, well when I install it I get my bootloader 05.09, and then I get a message below that the blootloader is 05.08 what should I do for that kind of free the sim? funny
VERY GOOD TOO MUCH GOOD I WOULD SAY I WORKED ALL EXCELLENT
THANK YOU SO MUCH
Hello… I followed the instructions step and I managed to free my iphone, thank you very much, excellent tutor
How are you? I'll tell you that I did all the steps and it was updated, the only thing that did not recognize me is the SIM, so I spent a long time trying, reinstalling and I discovered that the Basebands files for iphone 2G 3.9 and 4.6 were not correct or had Some error because at the end of the installation it marked an error, so I send you the link where you can download it http://rapidshare.com/files/132462993/bootloaders.rar.html
and ready all good, I hope it serves you as it does to me, Greetings.
Congratulations to the goey who did this, he was already scared shit but if it works the shit thanks
Good afternoon Julio Calderon what you should do is press home + power until in DFU (with the usb + itunes icon) this serves to remove that error from restarting, then you have to reload the software in this case 3.1.3 and it will raise the baseband to 5.12.01 but then you can do the jailbrake with redsnow.
Thank you very much kedo at 100
hello update my iphone 3g 8gb to the version 3.1.3 and I update the monden or baseband to the version 05.12.01 someone help me to download it please please
Axis the best thing this is that I got everything I was looking for for free
Can someone give some news to release (use as a phone) iphone 3g, baseband 05.12.01, version 3.1.3, I await your comments
VERY GOOD YOUR CONTRIBUTION !!!!!!!!!!!!!!!!!! YOU SAVED ME FRIEND !!!!!!!!!!!!!!!!! 100X100 RECOMMENDED WORKS PERFECTION, since I have only had my 4G iphone for 2 days and I made the mistake of updating directly from iTunes to the latest version 3.1.3 and when everything was done it restarted and the chip did not register, but By following these steps it automatically turns on, when it ends, and the chip already registers you !!!
1000000 THANK YOU !!!!!!!!!!!!!! With this, beyond saving a few pesos, I can continue to use the iphone since I did not know if it would work again ... THANK YOU !!!!!!!!!!
Good:
Thank you very much for the tutorial, it is very good, but I find myself in an emergency when I download Firmware 3.1.2., It comes out as a zip file, not as ipsw, please can someone help me that I will be very grateful, or is there another link to download it oq mistake I'm making. Thank you
HELLO JUAN PABLO .. SEE KA ME ALSO HAPPENED TO ME .. I WAS BATTLING A LOT KOMO A WEEK HEH .. BUT IN THE END I DECIDED TO LOWER IT IN THE MOSILLA AND I LOWER THEM LIKE IPSW… .. I HOPE YOU WILL SERVE THIS… FOR KE TO ME IT WORKED
Hi Juan Pablo,
The only thing you have to do is change the file extension from zip to ipsw and with that it works.
Greetings.
thanks brother, my iphone works perfectly
Hi, I was able to jailbreak at last !!!!!! But I have a little problem on my phone, the wifi button appears in gray and I can not activate it, please help me to solve the problem, my version is 3.1.3 with the newest baseband, and I cannot download it with fuzzyband, it is an iPhone 3G
It works perfectly, thank you very much for sharing !!!
help
I have an iphone 2g, I have already done this process several times without any problem
but now when they try to restore the iphone again, the itunes crashes
in the restoration process when version 3.1.3 is introduced, more precisely when it says "restoring
the iphone software ». and on the phone the apple appears with the progress bar but it does not progress, it stays up to a certain point and does not go from there, and on the itunes the bar is complete but it does not disappear or anything happens, please help, I don't know what do, everything freezes
oscar_
Try changing the USB port or the computer
hello I just have a few doubts if I already have firmware 3.1.3 do I have to restore it mandatory?
But since I restore it, I have to install the firmware 3.1.2 with the redsn0w?
then how is ke keda kon firmware 3.1.3 if I am installing 3.1.2?
THANK YOU VERY MUCH BERLLIN, the simplest solution turned out to be the most effective, I had already tried changing the USB port, but not the computer; I did it and heureca!
thank you very much again.
I have 2 questions:
1. I keep restoring my iPhone 2g with this technique. My question is, if I do this many times, can the iPhone be damaged?
2. They are not working very well for me, let's say push notifications sometimes work and sometimes not, I am using DOCtOR PUSH downloaded from Cmdshft.ipwn.me/apt/, is there a better one, or what problem can you be experiencing?
Hi, I hope and you can help me. I'm new to this iPhone, mine is 2G and this version is 3.0. I'm from Mexico and the iPhone was sent to me from the USA.
I get the CYDIA program if I do this there is a danger that my iphone will no longer recognize my sim
I can pass it from 3.0 to 3.2
I hope and help me that I am seriously a newbie with this
Hello
I have a problem, I do everything well the tutorial, but it is not unlocked for any sim. The problem is that I don't have the original sim, what can I do in these cases ???? I hope you help me solve the problem thanks.
I have a small problem, it performs all the unlocking, but when it reaches the end there are some messages in English, you see for a few moments one of the screens where the configuration is and then the apple anagram appears and it stays locked with it turned on, it is an iPhone 2GB 8G
Hi… !!! I have an itouvh 2g with 3.1.3 and I re-do the whole process and when the end comes it says waiting for reboot
What does that mean ?????? is there a problem ??? already this or what should I do next ????
I hope you answer my question:
I accidentally restored my iphone (2G) and it got updated, I couldn't use it for a long time because it didn't go beyond the emergency call, well later I found out about the redsnow and did everything, it's ready and unlocked 🙂 but it doesn't recognize my sim card, it tells me no service (if my card is registered)
I hope you answer my question:
I accidentally restored my iphone (2G) and it got updated, I couldn't use it for a long time because it didn't go beyond the emergency call, well later I found out about the redsnow and did everything, it's ready and unlocked 🙂 but it doesn't recognize my sim card, it tells me no service (if my card is registered) before that I already had my iphone with cydia and had a program (bootneuter) to make the sim read, the question is, does something happen if I download it? why is it supposed to read the sim without any problem = /
do not……. grax many graxxxxxx
!!!
There is a problem, that when you give me the options in the redsnow I do not get the unlock to what I give?
The comment is simply one of gratitude, I followed the steps as you indicated and voala the magic was done. Thank you, I had been about 10 hours without counting yesterday's trying to blow up my iPhone and thanks to you the goal has been achieved ... a piece of advice for others who They keep trying, don't let them know that if they can and this was the best way to achieve it, thank you.
Any news about releasing the 3g 3.1.3 firmware 05.12.01 and bootloader 05.09
Congratulations, everything is clear and it was perfect for me !!!
Any news about releasing the 3g 3.1.3 firmware 05.12.01 and bootloader 05.09, I'm tired of having the iphone as ipod
and on the iphone 2g screen I get no sim card installe imei: 01 130100 561651 0 XNUMX
unknown iccid
but I have blocked my cell and nadama tells me insepte sim and I do it and I keep it the same and it is in version 3.1.3 how do I release it I do not know how to do it
I'm from Mexico. My problem is that I can't update the iPhone from iTunes because I don't have the original sim card. My iphone is a 2g and they brought it from the USA. I do the whole process and it reaches the point where the apple and the circle it is working on appears, but from there it does not happen, it restarts several times but it does not go from there. I have already tried other programs and this is the only one that has done something but it does not work at all.
Can anybody help me
hey, thanks, it worked for me a thousand thanks, thank you.
Do not stain, you are very good at this, I already did it on my 2g and it worked the first time.
I am very grateful to you and keep sharing all your knowledge.
Hello, great tuto, also I really like this program, but I would like to know something, I have an iPod 2g with jailbreak and firmware 3.0, but I would like to update it to version 3.1.3 but I do not want to delete it or the things I put on it With cydia neither my sources nor repositories nor anything that I have put, some of you could not help me, if someone knows how I can update without deleting anything or in any case how to back that up so when I already have the new firmware can I easily do kede as before?
I have already done the jalibreak and perfect, but now it won't let me connect to the Wi-Fi network…. What I can do???? What have i done wrong ????
Hello, I have a pod touch 2g 3.1.3 and after putting it in mode, it starts to DO the jailbreak process, and it turns out that redsnow stops working, I could fix it, but I was scared, what did I do?
hey my problem is that my iphone 3gs 3.1.3 is MC model and I want to do the unlock I want to know if the purplera1n application does this work, since my iphone does not work with any SIM.
thanks I hope you help me ...
Hello, thanks for the tutor, like Miki, I do not get the unlock option that can be done in this case, please if you could answer me, it is an iphone 3g
Hello, thanks for answering, but I can't release it, I'm not very good at this although I have tried, anyway thank you very much.
Paco,
The same thing happened to me about waiting to reboot ... and it was because I didn't turn off the itouch before starting the reset.
When I did, I tried again the first time! and now it's perfect
regards
pss ami tells me that the ipw does not identify me, what can I do ???
please help me
Good afternoon everyone.
I made a mistake with my 2g.
e downloaded and installed firmware 3.1.3
and now i can't unlock it.
It would be someone so kind to help me.
thank you all.
pelos__666@hotmail.com
Hello, this tuto, after so much searching the web, yes, this was super, it worked for me the first time, thank you immensely, thank you, I am happy now.
Huyyy menn muchisisisismas thanks this is the best of all the GRACias tutorials
Great! I had installed 3.1.3 and had all my data, such as photos and contacts. And this one works like a charm, without losing my settings!
HELLO !!! HERE YOU CAN ALREADY UNLOCK THE IPHONE WITH BASEBAND 05.12.01 IN FIRMWARE 3.1.3 TO USE WITH ANY COMPANY ..
I would like to know if when you install 3.1.3 you erase everything .. because I have 3.1.2 and I want to have 3.1.3 with jaillbreak and I want to erase everything so I leave it very clean to the iphone .. greetings
WOWWW EXCELLENT !!! After a lot of struggling thanks to this Tutorial I was able to use my iPhone the first time and super easy !!! = D
I have an iphone 2G 3.1.3 with BB 5.12.01 and it was stuck on Emergency call !! and that's it, I'm working for movistar and telcel in Mex…. = D
THANK YOU
This website is luxurious I repair my cell phone and in my country they were charging me a lot of money thanks to this I only spent less than a quarter on my iPhone 2g
Thank you Edu… !!! I'll try again..!!!! but this time I do it with the ios4.0 and the new redsn0w .. !! because I have the same problem hehehe… !!!
Please help me I was updating with this tutorial but when I started my pc it completely locked and the iphone was kedo with the usb cable on the screen and the itunes disk and from ai it does not come out on the pc I connect it and it does not say anything, it only makes a sound please help
Wooooooooooooooooooow !! My respects!! You are a magician !! I came back to life ... Greetings!
friend a thousand points, your page very good so far all good, thank you
Excellent!!! 2G Updated to 3.1.3, thank you very much very good tutorial.
I have updated everything correctly but the Wifi does not work !!!! I have a 2g… .how can I make it work for me?
Another thing… .I have cydia, but I have lost all the programs that I had downloaded from it, such as the sbssittings..winterboard etc .. they cannot be recovered in any way ??? and if i download them again, is there no way i can save and install them again ??
Thank you
Thanks for this excellent information, there is nothing hidden here, everything is in the light and explained both in the tutorial and in the redsn0w; I even felt offended in the part that tells you that the switch is on the upper edge of the computer hahaha
How can I do this to an iPhone in 2.2.1
Thank you, thank you, thank you, for dedicating part of your time to give us solutions and help us with these issues… ..I got the jailbreak the first time…. Following your instructions step by step…
Hey very muchiiiiiiiiiiisima thank you, I had since 2 in the afternoon and it is 2 in the morning and thank God I found this forum because I had already tried practically everything and nothing worked, thanks again
Friend THANK YOU VERY MUCH FOR THIS TUTO raise my ipohne from the dead you are a GROSSO KNOW. !!!!!
no mames weyy thankssssss !!!!!!!!!!! if there were t dab points 99999999999999999999 hahaha thanks
HELLO, YOUR INFORMATION SEEMS GOOD AND I WOULD LIKE TO ASK YOU PLEASE IF YOU HELP… AFTER I HAVE UNLOCKED AND JAIBROKEED MY 2G, YOU HAVE TO DO THE PROCEDURE AGAIN BUT NOW I STAY IN THE MANZANITA… IT TURNS ON AND TURNS OFF AND APPEARS NEW LA MANZANITA ... HELP ME PLEASE
Hello,
Well, with my iPhone 3G and iTunes 9.2 everything has been correct but the phone is now without coverage ... I can't find my operator ...
Hello,
The problem is that before applying the redsn0w you have to activate the iphone by putting the pin and connecting to iTunes, once activated redsnow is applied! those essential steps should be put in the tutorial….
Thank you!
very good tutorial! It has helped me a lot after downgrading from iOS4 with my iPhone 3G
the truth is that I prefer a lifetime 3.1.3 and all my apps and functions 100%
Hello… Please my iphone 2G there is no way to unlock it. I've already tried 3.1.3 and 3.1.2 and nothing. The jailbrake is done without problems but my baseband is still on 04.05.04G and no operator available. I tried the redsnow tutorial and nothing, any solution?
Thank you!
MY IPHONE 2G ICCID: (HE WILL NOT LIE) WELL I DID WHAT THE TUTORIAL SAID TO ME ALL WAS WELL I TURNED IT OFF AND TURNED IT ON AND THEN YOU DON'T HAVE AN APPLICATION !!!!!!!!!!!!!!!!! !!!!!! 1 Luckily I RESTORED IT ONLY HAD YOUTUBE GOOD EH HAD FAILED JAILBREAK ATTEMPTS BUT THIS WAS THE PRIZE GOOD MAYBE WHEN MY IOHON 3GSSE GOT IN BUT GOOD NOW I NEED TO KNOW HOW I UNLOCKED IT IN ITSELF, BECAUSE EMERGIENCY STILL UNLOCKED IT IN QUESTION, BECAUSE EMERGENCY STILL RESOLVES IT IN QUESTION. KNOW HOW TO GET ACTIVATED I HAVE A SIM ATYT HELPAAAAAAA
Your work is impressive, after several cigarettes and a curious time taking the death of my iphone as a fact ... I find this page and in what I consider a little while ... my iphone is reborn from its ashes ... THANK YOU !!! and again ... great job
Incredible, I had updated it and believe that I should wait until a few months, thank you very much
Thanks! The tutorial is more than simple and clear. The problem is that when doing it on my iphone 2g, when the redsn0w ends and the BootNeuter automatically runs, it tries to flash with the Bootloaders, I get a message that the configuration is fine and there is nothing to flash. Therefore my iphone is unlocking! Please I really need help. I would appreciate any contribution, just one more, of the many that we receive from you that are great!
Thank you.
Hello, I already did all your steps without problems, download the appropriate versions and starting the configuration from 0 and it allows me to handle the IPHONE, but my SIM CARD does not recognize me, it tells me without service it recognizes the National operators but I cannot connect to them. If you give me a little hand, I would appreciate it very much
I await your prompt response, thank you
I want to know if in order to update my iPhone 2g, following your tutorial, it is necessary to do it only and exclusively with the original ship of the phone (purchased in the US)? Or can I do it with my ship with which I have always used it (the one that I put since I used it in Venezuela)?
The question is because after following all the steps that you indicate, just at the moment when the firmware 3.1.3 is finished downloading, a screen appears that says: The SIM Card is not compatible with the device, please insert original SIM ??????
HELP
For those who have problems with the sim and operators, the best way to solve it installing from cydia ultrasn0w works for all the baseband of the iphone 2g and 3g. I hope it helps you. Greetings
Gabriel: I tell you that on my iphone 2g, when installing the ultrasn0w from cydia it is not released either. My baseband is 04.05.04g, Any other solutions? please i'm desperate!
How do I solve the signal problem that I have with my 2g?
please help with coverage.
Hi guys, thanks for the comments but this definitely ate me and I was so desperate that I had to pay someone to revive my iPhone 🙁 I couldn't go on like this (he is my life) Although I'm still very bad because I lost everything, everything I had, applications, contacts, photos, videos, etc, etc, etc
Anyway I have a specific question now; Can I install the iPhone 4G version on my iPhone 2G and use it with a SIM in Venezuela?
If the answer is YES, then how do I do it?
If the answer is NO, then what would be the latest version that I can download?
THANK YOU
blt39 and bl46 do not recognize me
It worked OK.
Thousand Thanks
Thanks for your help. I have a 2G iPhone when following this tutorial, redsn0w does not give me the option to "unlock" and also does not ask for the bootloader and takes me directly to the DFU process and gets stuck in waiting for reboot. What should I do? Download all downloads from here.
Greetings and I hope your answers
Hi guys, I bought the 4G and I was going to give the 2G to my wife, for which I did a complete restoration, she asked me for the AT&T card and although I have it to activate it forces you to register the line, total after a thousand Adventures I found this tutorial, I thank you very much for everything and tell the one who says that it has to be activated to look at it better since it is not true, my problem was exactly that I could not activate it.
hello thank you very much for all the tutorial it served me I just revived an iphone 2g that I thought was dead, thank you !!!
hey I've seen all the positive comments that's why I cheered up! but I have a problem! I did everything perfect but in the end when I put the sim it just gets the signal bars but it does not load any and my operator does not appear.
The tutorial is perfect, but only one operator recognizes me, as if I had coverage problems, before updating everything was perfect, any suggestions ???
The tutorial is perfect, but only one operator recognizes me, as if I had coverage problems, before updating everything was perfect, any suggestions ???
hey already solved my problem! I couldn't unlock my 2g 3.1.3 because the bootloaders files weren't right! I needed 4.6 and that file was bad! I changed it and the unlock was complete! check the Bootloaders that both are 128kb. Thanks for the tutor 😉
Good morning.
Please help ... I have seen that the same thing has happened to several of us (we finished doing the procedure and no SIM Card recognizes us) please someone who can tell us how to solve the problem since we do not have a cell phone.
Thank you very much.
Well, the forum seemed serious. But some users like me have been waiting for a response from a moderator for more than a month….
this tutorial works perfect. with the detail that the boots that you have for download are not useful! thomas and dyu what iphone do they have?
if they have a 3g this will not unlock them ... only unlock the 2g
the tutorial works, I did it for a 3g,
does the jail in the 3g nothing else ... to unlock it with any operator you need to install redsn0w from cydia! 😉
JCha: I have an iphone 2g. I know that the tutorial works well, only that my iphone is not released, I know that the boots work badly, but I did it with boots that work. But I don't know why the reason remains unreleased.
Someone told me that the problem is that I upgraded my firmware from version 1 directly to version 3. Could this be so? the truth is I am quite desperate.
All the best
Tomas
THANK YOU EXCELLENT FORUM I WRITTEN FROM VENEZUELA I WAS ALREADY SCARED I THOUGHT THAT I COULD NOT UNLOCK OR UNLOCK THE IPHONE 2G AFTER UPDATING IT TO OS 3.1.3 BUT THIS FORUM DRAWN ME OUT OF THAT LIO IS VERY WELL WRITTEN AND THANKS TO THE CREATOR. THIS LINK http://rapidshare.com/files/132462993/bootloaders.rar.html
Tomas: I don't think it affects the fact that you come from an old version! since when updating I would ask for requirements and it is not like that ... and I think that your problem is only the bootloaders I got tired of trying many and nothing until I found them!
look these are the ones I used! I just uploaded them ... try and tell me how it went.
http://www.mediafire.com/?h1w81hpdpvkoehk
Verify that when unzipping both .bin files they weigh 128KB ok luck
Thank you very good contribution .. I am very grateful ..! now to have fun hahaha
I have a problem is that I have an ipod 2g in 4.0.2 and I want to put the cidya as I can see what program there is for that, thanks in advance ………………………………………………… ……………………………………………………………………
Well I have NOT had any luck with the boots that JCHA gave me. They both weigh 2. But hey, I'm going to have to pay someone to do it 🙁 Anyway, thanks ...
download the fireware but I don't know how to unzip them, inside the folders there are many things ...
I have an iPhone that got stuck due to an update, the redsn0w 0.9.4 detects it correctly but it is waiting for reboot
Tomas: try to download another firm and restore again ... those boots I'm sure they work.
Hector; The firm that you downloaded, I imagine that the ending is .ipsw.zip? Well, if so, you just have to delete the last part of .zip the firm, it is not necessary to unzip them.
Any answer to my question, do I have to wait a long time in the waiting for reboot? the screen is black any recommendations?
Thanks a lot. I have done it with my 2G iphone and everything works perfectly the first time.
Thank you very much for the help!
with this I can aser it to an ipod in 4.0.2 2g?
the best to unlock a 2g iphoe thank you very much
Although I do not know if you can put 4.0 it does not make sense, 4.0 has many restrictions compared to 3.1
The best method to unlock an iPhone 2G
I have my iphone updated with blackr1n and apparently it has an error, the photos I take are not saved anywhere. it is more I do not know where they are. that's why I'm going to test this version and thus update it to 3.1.3
Have you already tried this version, does it work? someone to comment please. regards
EXCELLENT, TODAY I MADE THE UPDATE AND I GOT OUT OF 10. THANK YOU, I'M VERY GRATEFUL.
I do not have the iphone released, without service the sim tells me, what should I do, I have the iphone 2g 16 gb with this update and the baseband is 04.05.04_G. I would appreciate the help
but is the iphone 3g unlocked?
Hey, when I want to restore it, I get the folders on itunes but there is nothing else, just 2 empty folders, as I do while I can't do anything.
Please help !! 1 URGEEE !!!!!!
I tell you, deal with Snowbreeze, the itunes gave an error when installing the custom firmware, Blackra1n got hung up after saying that the 3.1.3 would already be released after resetting the equipment.
And finally when I thought there was no hope Redsnow made the cut.
You always have to continue.
Rodrigo opens the file with winrar, do not unzip it, once winrar is open you save a copy of it, in the name box you change the extension to ipsw and voila it gives you the file.
Excellent, so far iPhone 2g hacked and released ... very good
good excellent the contribution keria see if I can do it with the itune 10 because I tried it and it tells me that the firmware is not compatible I do not know why I hope they help me thank you!
It's great, I tried it with the iPhone 2g and it's great
Everything works great for me but I have no signal of the sim, can someone help me
One question I have done everything but not if it is because of the iTunes 10 that the iPhone 2g of 8g does not give me a signal, and the you tube does not work either, can you help me please, I have also done all the steps. help plis
Thanks this very good tutorial, the iphone is activated and jailbrakeado, thanks to the wi fi works perfect.
Hello. Does anyone know how to unlock an iPhone 4g with firm 4.1 New bought without a contract in the USA. Pleasseeeee. I need a guruuuuu. Save me
Congratulations!!! without major prob. update my iphone.
THANK YOU!!!! : =)
excellent, I rampaged after the annoying error that iTunes throws…. But now I have a problem, I cannot release it to grab all the networks, who can help me, I stay as it should be, but the sims do not read them, it only works for me with everything except the phone, thank you 😀
Hello good afternoon, I need someone to help me ...
restore the phone with this firm. I started to install the ultrasn0w from cidya, from there now only the apple comes out ...
I did the following steps:
dfu mode restore by itunes.
then the itunes logo comes out and the cable I gave to shif and restore I look for the firm and it gives me error 1604.
I change the usb port, restart the pc, delete and reinstall the itunes and nothing.
who can help me a lot would know how to thank you, my iphone is 2g, 16gb
I need to know a few things before trying:
1-is it sure that the ipod touch 1g works?
2-it is not possible that the ipod is damaged?
3- when hacking it deletes all the content before the jealbrek?
4-is there any limitation to having it hacked.ej: update it or put music on it?
Seriously plz answer me I need to know send me the answer by email estebanest413@hotmail.es or put a comment plz plz plz ...
Question:
this also installs the program to download the free games (installous) and the stick for the themes (cydia) ?????? Plz reply me estebanest413@hotmail.es
HEY, DOES REDSNOW GET ME IN WAITING FOR REBOOT? AND IF I REBOOT ME, GOODBYE ALL. WHAT DO I DO????
monkey you are a capo, you saved me. Thank you. everything to perfection
EXCELLENT! FINALLY FREE MY IPOD TOUCH 1G
this so good now I'll do my jaiibreak without miego thanks
Hello you saved my iphone 2g you are a CAPOOOOOO. A hug.
Thank you, teacher, all good. I continue with my 2G
You saved me! I had thousands of tested methods and none worked for me, only this one!
SAlu2.
hello I have an iphone touch 3g with fimeware 3.1.2 (7D11) IS UNLOCKED what I need is cibia but I already tried with blackra1n but nothing happens, please help me I will be very grateful and I was wondering if I can update you with OS4.1 or not because I want it to be unlocked
regards
I did the steps by finger on my iPhone 2g and everything was perfect, but when I turned it on ... I got no service, that is, without coverage and it does not give me the option to select an operator or, for example, change the sim pin, when it does recognize the sim , since at the beginning he asks me for the pim.
Thank you very much in advance!!
Updated step by step, apparently without major inconveniences, for the sole fact that I cannot open YouTube, it had the same drama with the previous firmware (3.0.1), if someone could help with any solution I would be very grateful. Thanks for the manual, approve of newbies 😉
very good !!! it worked perfectly !!
greetings and thank you very much
emma
Hello, I jail break my iPhone 3G with firmware 3.0.1 a long time ago and everything has gone very well, but suddenly the ituenes no longer recognizes my iPhone, I already did what the Itunes troubleshooter indicates, but nothing, I don't know if this problem is because my iPhone has the jailbreak.
Could you guide me or is this problem in another forum?
Thanks in advance.
If he had explained to me that the firmware in zip format could be converted into ipsw by changing the extension in the explorer, it would have finished in 10 min and not in 2 days. Anyway thank you very much.
excellent contribution, everything works 100% well super easy anyone can do it with these explanations there is no need to pay so much money for any little thing to the supposed iphone technicians
works excellent in 2g. exelso. God bless these guys from the dev team, what with the spirit I did not achieve now here it is, Colleagues, in the last paragraph it says that the iphone 3g still has to wait a while for the coverage, maybe it is the problem that many publish, Christ with you and many successes, see you later.
hello friend I have a problem I have an iphone 2g with firmware 3.1.2 (currently) they just sold it to me but it did not grab my chip, it said that it would insert a valid chip. I released it with this procedure but it does not recognize Wi-Fi networks. any solution? I'm desperate lol I can't find anywhere I tried with firm 3.1.3 and 3.1.2 the same procedure and nothing
consultation:
I have an iPhone 2g, which was unlocked and activated for any company with the 3.1.2 update
It occurred to me to update it with version 3.1.3
and the team locked again
I did the same procedure that you put here.
now it recognizes the chip but does not allow me to activate it because it says that the sim is not from the corresponding provider
What do I ask for help?
thanks before hand
This is the only tutorial that really works for IPHONE 2G, I have tried at least the 8-page one… nobody explains it better and how it is… than this one, in fact the only one that works. RECOMMENDED TO EVERYONE. Thanks to the one who published it.
Now… THIS IS A QUESTION FOR THE CREATOR OF THIS TUTORIAL…. my mom has an iphone 2g for which this tutorial worked perfect. But I have an iPhone 3G that had version 3.1.2, I downloaded the 4.1 software and installed it using iTunes with the shift trick and that, it crashed !!. I used redsnow 0.9.5 to make the custon firmware… it did and I managed to do the jailbrake. The phone accesses the menu and everything is fine… BUT… IT DOESN'T GRAB ME A SIGNAL !! MY OPERATOR'S CHIP DOES NOT RECOGNIZE ME. Enter repo666 through cydia ... install the ultrasnow 1.1.1 (which is the only one that comes out) and it is as if it did nothing! He won't let me use my chip. WHAT DO I DO ? Please help me !! I'm without my iphone for this problem! Thanks in advance
Great ***** excellent tutorial, everything came out without any problem, thank you man, the post is very good, really THANK YOU AND KEEP POSTING THINGS LIKE THESE!….
THANKS…
Excellent Chapulín, Excellent !!! I am new to the forum but this tutorial is re-easy, you are a good hand… I fixed several functions on my iPhone 2G that did not work properly and above all I updated very well to 3.1.3 well NO more than talking about batteries… 100 points. Again he returned to the English language because I bought it and it came in Spanish and what a can ... so it is not understood much ... (I'm a computer scientist ... no, we like it in another language).
excellent thank you very much for the tutorial this deluxe kedo me perfect thanks it helped me a lot this 100 recommended
Hi, I have a problem trying to update firmware 3.1.3 on iphone 3g. I downloaded the link, but on itunes 10 I don't have the option to "restore". Thanks in advance.
hey check your itunes bn because I have 10 and mine if it has where it restores the same k all the previous ones I recommend that you uninstall it and install it again or repair it because it has to have it somewhere !!
Hello everyone, I have a little problem and I don't know where the solution is, I have updated from itunes to version 3.1.3 the iphone 2g, x now well. The problem comes to me when searching with redsnow for 3.1.2 that does not locate it, I cannot find any file with the extension .ipsw
If someone can help me I would appreciate it very much
Hey.
The same thing happens to me as you, that redsnow does not detect any ipsw file. What am I doing wrong ???? Can you help me??. Anyway I haven't updated the iphone yet, could that be why?
all the best
Lied !!!! I already have it.
His mother, what cost me to find a post where he was. The firmware that you download are zip. What you have to do is change the name of that zip extension, by ipsw. Without extracting the data. He asks you if you want to change it, you say yes and immediately changes the zip icon to the ipsw icon. Then you start redsnow and it detects you. AND READY!!!!
hehe
Hello…
I have done this tutorial and the truth, without any problem, the mpvil has worked well.
The only thing that happens to me is every time I finish a call, it hangs at the end and I have to restart my iPhone 2g, is it happening to someone else? Solution?
hear the buttons are pressed before starting or after giving nex
This tutorial is very easy, and functional, it is the first time that I release an iphone, and it worked for me the first time. THANKS A LOT
excellent information, it worked for me 100%, thanks really for sharing very useful data ...
I already did, but it tells me without service why
I have updated my iphone 2G:
I have taken all the steps and apparently everything works fine, the problem is that now I have no coverage and I cannot make calls ...
Have I done something wrong?
Can someone help me? I've run out of mobile ...
Hello, how are you? My query is the following, I have the itunes 10 and I want to upload the iphone 2g to 3.1.3 but I don't know if it can be done with the itunes ten, could you please advise me.
wallkker@hotmail.com
VERY GOOD TUTORIAL, IT WORKED VERY WELL, BUT I'M IN MEXICO AND MY IPHONE IS IN ENGLISH, DOES ANYONE KNOW HOW I PASS IT TO SPANISH ???
Hello, I found an iPhone and it is locked with a password, someone can help me and tell me how to unlock it, please.
Thanks for the contribution, everything OK !!!!!!!!!
Hi JC, I have unlocked several password protected iPhones. The way I have done it is very simple, just follow the tutorial shown at the beginning of the page and with that the password is deleted
hello Leonor, for that, enter: SETTINGS, then in GENERAL, then in INTERNATIONAL and then in LENGUAGE and there you select the language of your preference, I hope and it will serve you and greetings PAISANA, I am also from Mexico.
please I need help! I already did everything but I am the same as the friend who has no signal .. I can't make calls! Please someone help me with this! there is no sign of anything! Thank you!
Hello, my iphone 3g, yesterday I set it to restore settings and when I let it do it, I no longer want to start loading the apple ... then I tried to start again and I did everything you told me, but at the moment of restoring it marks an error that is the 1015 and I read in a page that it did not matter but then I continued with everything you say above and when the process ends everything turns off and everything is shown the same as if it were connected to iTunes ...
What do I need?
grax if you could help me
Excellent tutorial, it has served me very well, I helped unlock the iphone of a friend and it was very good!
I found the page excellent, the only problem was that the YouTube app does not work, before it had been unlocked with blackra1n and the same thing happened. The tutorial seemed EXCELLENT. Thank you
grateful
good can someone help me ??
In the last step to put it in dfu mode I do it satisfactorily, my question is when it is loading it takes a long time or is it that it does not perform the steps well since it loads several bars and it seems to me as if it has been stuck since it does not load anything more nor The option to finish is marked I request your help ...
I am downloading to see what it pulls in advance Thank you very much Brother
good morning I solved the problem and my iphone is working fine thank you very much for the post
hear a question if I want to jailbreak the cell phone and tmb that can be used with any chip, what should I do?
Hello, I ask the question again, I installed itunes 10 and I want to upload my iphone 2g at 3.1.3, will it be possible to install the firm with itunes 10, will it give me problems when releasing it? how do i do it? Best regards
I also used iTunes 10.1 and followed the steps above, I had no problem except the YouTube app, but I had already had problems with that before (as I mentioned above) Sure you can do it 😉
URGENT HELP .
I have another problem, I have the iPhone with 3.0 and I update it to 3.1.3 and I am with resnow now and when I install the firm 3.1.2 I get only processing frimware all the time, what do I do? Help, should I have had it released with 3.1.2 before or is it okay to have gone from 3.0 to 3.1.3? I do not know if I explain myself very well. Best regards
Thank you dad. All came out perfectly, I really appreciate it.
Epale, thank you very much, very good tutor…. served my hair, ^^
Greetings from Venezuela
Hey, I jailbroken a 2G and it worked but I don't have a signal, I don't have any coverage… How can I solve that?
Greetings, with this process also hacktiva the 2G ??? since AT&T chip I do not have .. thank you!
How are you! When I run redsnow, it first asks me if I have the newest version of the iphone 3g, I say no, and in the next step, where I have to select INSTAL CYDIA and UNLOCK, I don't see the option to select UNLOCK. I have an iphone 2G (classic) because you think this may be happening. In the end I can not load the bootloaders, the phone remains the same without cydia and blocked. Thank you very much for your attention
perfect great !!!
HELP, THE SAME HAPPENS TO ME AS THE TWO POST ABOVE, IT DOESN'T APPEAR TO ME TO PUT UNLOCK IN THE REDSNOW OR THE BOOTS, WHY CAN IT BE?
Thank you very much my father had bought an iPhone 4 and the old one screwed up. You have given the advice very well because I at 14 years old I have known how to do it a lot, thank you and good luck to the others
Look, I have a problem .. I have an iPhone 2g I do everything and it tells me waiting for reboot ..
what do i do? I stay there ..
Hi, I hope and you can help me. I'm new to this iPhone, mine is 2G and this version is 3.0. I'm from Mexico and the iPhone was sent to me from the USA.
I get the CYDIA program if I do this there is a danger that my iphone will no longer recognize my sim
I can pass it from 3.0 to 3.2
I hope and help me that I am seriously a newbie with this
It definitely saved my life, after updating the version to 3.1.3 in iTunes and locking the iPhone, I had to find a way to free it, also, I did not think to give money to a technician for doing something so simple.
Hi, I did all the steps but the phone keeps getting blocked, any help? Thanks a lot
Hello,
I am trying to unlock my dog iphone once the 3.1.3 system is installed, I open the redsnow 0.9.4 and when I select cydia the unlock option does not appear. Following the instructions once I have done the thing to hold the buttons down, it stays in waiting for reboot. It will be that there is something I can do.
Thank you
Hello everyone, I have a little problem and I don't know where the solution is, I have updated from itunes to version 3.1.3 the iphone 2g, x now well. The problem comes to me when searching with redsnow for 3.1.2 that does not locate it, I cannot find any file with the extension .ipsw
If someone can help me I would appreciate it very much
In response to this ……………………………………………… ..
when you download the file named iPhone1,1_3.1.2_7D11_Restore.zip what you have to do is rename the .zip ending to .ipsw you will see that it looks like this "iPhone1,1_3.1.2_7D11_Restore.ipsw" then look for it from the program and voila.
Thanks to me it served me, I disagreed with that a lot but my iphone is free.
Oral no ps I am from Mexico and I just got a 2g and it was released when I connected it with the iTunes update it and it blocked me and I no longer kiso any sim do the steps as the tutorial and ps tube mark them some problems but I passed them and in the end everything is excellent if it has a signal and everything is fine. Some observations that the tutorial does not mark it, change the extension of the file 3.1.2. From .zip to .ipsw then first extract the Bootloader 3.9 and 4.6 to a destination my desktop preference, from there everything is going well until you get to the part in English, what it asks you is that you have the ekipo turned off before running the program, already when you get to the seconds part. What it asks you in the 3 steps is 1 keep the power button pressed 2. without releasing the power button, keep the home button pressed, it is the central button and finally 3 release the power button without releasing home, and when you see what is going down The information ps already fucking wait until ke just turn on and start it off more or less 2 or 3 times but in the end ahy keda! well if you have any questions send an email to jape16_perez@hotmail.com lucky zaz
How about this tutorial seemed good to me and finally I was able to release an iPhone 2g that I had many thanks and continues to publish many more tutorials, you deserve a 10, greetings
People very much attention to download the firmwares it is necessary to do it from firefox so that they appear as .ispw and not as a .zip file
Hello everyone, I did all the steps correctly and my iphone 2g was updated to version 3.1.3, the only thing is that I have no signal, please can someone help me, I have tried and nothing, greetings ...
Thank you very much, your tutorial is very good, complete and the best is effective.
Cheers…!!!
Hello friends, I have all the necessary downloads for this procedure but I can't get past the redsnow telling me "unable to recognize the specified ipsw" for a little help, I've already downloaded the ipsw from other sites and the same thing with redsnow until I tried it with current versions of redsnow and nothing, I also made sure that the ipsw are with this extension and not zip also I have itunes 10 installed but I tried on another pc with 9 and nothing, I don't know what else to do
thanks for your help
Excellent…. Now that I am going to sell the iPhone, with your help I will leave it as new!
perfect!!
but the cydia stays in «Loading Data» all the time ...
The solutions that I have found to this problem require the installation of other apps, so it is the whiting that bites its tail ... how could it be solved?
thank you very much!
thank's so much !! i really appreciate… works !!
Greetings, update as the tutorial says but my iPhone 2G does not catch a signal on time and when it went to upload I got a message telling me about the bootloar, see if you can help me, and thanks for the tutorial.
Greetings berllin. Everything perfect except cydia. It does not open. Could it be because I haven't used iTunes 9.0.3? All the best
I found the signal problem, gentlemen, the problem was that all the tutorials have a problem with booload, the files have to weigh 129KB, they can be downloaded from 4Shared, they look for them and mount them on their mobile, and that's it.
Fantastic tutorial, jobs like these are really worthwhile and useful to those who seek them. Congratulations
THANK YOU!!! It worked perfect for me and I was already pulling the hair out of my cu… ..
Thank you very much, it really worked for me 100%,
These types of tutorials are worth being here on the internet.
Incredible!! after downloading it only takes a few minutes on my iphone 2g, only the yuotube does not work, is there any way to correct it?
Very good. I just tested it and it works perfectly.
but when can it be released for 3G?
Good evening, after doing all the step by step, no sim card recognizes me, what can I do? help me please
When updating CYDIA, it gives the message SIZE MISMATCH. I have restored it several times.
Does anyone know how CYDIA can be updated?
Thank you
The same thing happens to me with CYDIA, SIZE MISMATCH.
iPhone 2G
tope_59: In addition to Cydia, more applications (BigBoss…) appeared with the same message. In the end, I was installing other applications and he let me install Cydia (accidentally)
damphir1: When you pass redsn0w, besides Cydia it clicks the Unlock box
isa: This tutorial is useful for 3G (berllin dixit)
Daniel P: In short, restore 3.1.3 on iPhone. Then, with redsn0w, when it asks you about the ipsw, you search your PC for the version 3.1.2 previously downloaded and click it. Then everything followed.
but if i don't have ios 3.1.2 how can i jailbreak it
Excellent tutorial, it worked perfectly, each step is clearly explained and the phone works as normal, thank you very much !!!!
The sound does not work for me, I see a sign that says that this accessory is not designed to work with the iPhone, and the sound does not work, what can it be?
Follow me
It follows me through all the steps, it turns on, it turns off and everything but the cydia does not appear or anything ... the phone remains the same ... because it can be? What can I do ...
Hello,
super tutorial, on my ipod touch 1G everything worked perfectly.
Thank you very much.
I HAVE A 2G IPHONE AND I WOULD LOVE TO DO THIS !!! BUT ... AND IF I GET NO SIGNAL ... IF THE SOUND DOESN'T WALK ??? WHAT DO I DO??? SOME SPECIALIST TO HELP ME!
PEOPLE…. 3 DAYS AFTER MAKING MY FIRST COMMENT. I COULDN'T WAIT MORE !!! TAKE THE TUTORIAL AND I WALKED FOR 10 ... THANK YOU !!!! NOW I TELL YOU THAT…. IN WINDOWS 7 IT WAS ON THE WAITING FOR REEBOT PART…. I READ IN FORUMS THAT IT WAS THE OPERATING SYSTEM. THAT'S WHY I WENT TO ANOTHER COMPU IN WHICH I HAD INSTALLED XP !!! AND JOJOOOO PROBLEM SOLVED !!! THANK YOU
Damn you are the best, I released my iPhone 2G since they were going to charge me 20 dollars I love you jujujuj
Excellent!
Totally grateful for this great tutorial… I have managed to revive the iphone 2g that a friend brought me. Thank you very much .. right now I put it in FAVORITES. It works like a charm! = D
Hi how are things? I followed all the steps until the pineapple appeared running. but I have the iPhone in recovery mode and I can't get it out of there. some help?
Hi, how are you doing? Well, the tutorial is very complete, but since I don't know much about this pod, I do it with iTunes 10, that is why some icons like the ipod calculator music disappear and others, how could you help me?
to remove it from recovery mode use redshow and patch it with the version you downloaded!
thanks .. i did it iphone 2g firm 3.1.3 .. i had it on emergency call i followed the steps and it worked for me .. only you tube does not work for me ...
Friend I did everything step by step, download all the files but when selecting the options, the unlock option does not appear, please, if someone knows how to solve this problem, I would appreciate your help, I have an iPhone 3G and I restored it with the iPhone to the version 3.1.3 but in redsnow I can't get it to see the unlock.
a great doubt I follow all the steps and when the iphone is downloading (downloadin jailbreak dat ..) it ends and nothing happens it is still blocked that may be it is an iphone 2g
It happens to me the same as to Jair in redsn0w, the unlock box does not appear? What I can do??
bruce, solve my problem looking for files other than those on this page if you want to contact me by e-mail and I can help you to free your iphone, my msn is matialdjair1215@hotmail.com, add me and there we will see how I send you the files, on the other hand who can help me my iphone works great but the wifi does not recognize any wlan network not even inches from the access point.
I invite you to try some CUSTOM FIRMWARE ALREADY IT BRINGS ALL INCLUSIVE. ERRORS REPAIRED AND UP TO 2G IT ALREADY BRINGS THE APPLICATION TO LET YOU FILM. REGARDS!
Excellent tutorial I was around 2 days searching the net and nothing ... I tried this tutorial and in 15 minutes I got out of trouble, thank you
hi I'm downloading it to see if it works
when installing firmware 3.1.3. and get into the folder where I have unzipped it, there is nothing inside and I cannot install anything. What do I do? Thank you
you are the fucking master !!
ha thank you very much everything perfect ,,,,,, =)
THANKS YOU ARE VERY GOOD!!! I DIDN'T HAVE TO DOWNLOAD ITUNES 9 I DID IT WITH 10
does it take a long time for redsnow to complete the action?
hey redsnow does not recognize me firmware 3.1.2 tells me ipsw not recognized
what can be done?
Excellent!!! You have to rename the extension of the downloaded files from .zip to .ipsw.
The tutorial very good but At the end of the whole process it tells me redsn0w.exe stopped working. and windows closes it and on the iphone the screen is frozen with the drawing of a buro disk and says Downloading Jalibreak Data. Can somebody help me????? My email is vhpedro@gmail.com…Thanks in advance
It is the easiest explanation that I have found
I already have my iPhone ready
THANK YOU
there is nothing inside you get off !!
It works perfectly, go from having a brick or paperweight to an iPhone ... I only have problems with the wifi ... any solution apart from putting it in the fridge that does work but when it heats up it is the same again ..
They have told me that since my iPhone 2g has already been released if I try to update it in iTunes, what will happen to me is that it blocks my device, what is true about that? Please answer me, you went to my cell, several applications failed, thanks
roberthblond@hotmail.com
Excellent, finally revived but in English, would it be too much to ask you to tell me how to translate it into Spanish?
Thank you
Excellent it is no longer a brick, now wifi fails me, does anyone know how to solve it ????
How about, before anything else, thank you very much for the tutorial, it is really the simplest I have seen. But when I follow your instructions to the letter and after completing the process I keep getting the same message in iTunes ("It seems that the SIM card inserted in this iPhone is not compatible") and the iPhone only allows me to make calls from emergency, that is, I am right where I am.
Do you know what happened?
Hugo: Repeat the process and click on the "cydia" and "unlock" boxes (this second process is the one that allows you to place other cards)
Carlos: You don't know
Rmirus: In «Settings» change the language
Robert Blond: The most you can update is 3.1.3, but don't do it through itunes. Search this page for the indicated version and follow the tutorial. It is very simple.
Sensational gentlemen, I was also screwed with the issue that the sim was not compatible I thought that I had reached there and I would have to return it to the iunaits hahahaha, long live berllin that I leave it simple, for the rest of the readers it is only to follow through by step directions.
The download links worked for me all, I have an iphone 2g firmware 3.1.3, the only problem I had was when I downloaded the firmware 3.1.2 for 2g, which goes down as .zip, this does not have to be unzipped, you have to change the .zip for. ipsw and voila it is detected by redsn0w.
I already have my iphone working with movistar col, my last concern is the phone is ready to be filled with applications? 😀 Could you tell me a tutorial and a page where you can find good applications as well as games ... Thank you, sirs
The first time I did the process, I did it as it is written here and I did not get the pineapple when installing the JailBreak, with the boxes activated. And the second time I did it, I removed the SIM, the pineapple appeared and everything was installed perfectly.
Thank you very much for the tutorial and the files, here I already bring my iPhone 2g 4gb working with everything.
I did the whole tutorial, and it was unlocked, and I installed CYDIA, but when I open it to install repos and programs, it stays stuck in LOADING DATA, that is, it doesn't work.
I have searched the web and it comes out that you have to connect to SSH, but how do I install it?
xq when I go to look for the os of my iphone with the redsnow browse I get blank where I have it saved
Note that this page should appear at the beginning of the search in any search engine when it comes to iphone problems and updates, they are dogs for this. I woke up thinking about the matter - I upgraded my iPhone to 3.1.3 on itunes 10, but that estiv jobs turned me over, and it made me a cochi hand, and it told me "I gat cha mexican pirara" (pirate), what well he just did that to me. He only dialed for "Emergency Calls" but he followed the instructions at the bottom and he is back to life.
If you have problems that the SIM is not compatible ahead, you are in the right place.
Hugs for everyone here and if it is a woman a kiss, Well Deserved.
very good tutorial the only thing that does not work are the binary codes one of the files the bl-46 is not complete greetings and thanks for the info
I did everything and it was correct, but I do not get coverage from any company, can you help me?
I forgot, it is an iphone 2g baseband 04.05.04_
G
I did everything as specified and everything was perfect. The only problem is that now the phone does not pick up the operator's signal. What should I do?
Adrian ... the problem that you do not recognize a sign of any company is because one of the binary files is damaged ... look on another page for the files and download them, they must have 129kb each ......
very good contribution, nice to know that there are people who give their knowledge and research
Thank you
First of all, thank you very much for the tutorial, it's great !!! I have a problem and it is that everything is ok, but the SIM does not work correctly, the coverage icon is… .. and I don't know what to do. I have tried several things but nothing.
Any suggestions?
Thank you all, you are monsters 😉
hello weno the truth I did this procedure to an ipod touch 1g but with firmware 3.0.0 and connected it to itunes and the firmware was updated, and mark error 20, and I am unusable, then when trying to restore it gives me the obnoxious errors 16xx and e I tried a lot like downloading firmware, dealing with ireb, and it doesn't work for me if someone can help it would be great because I don't know what to do…. Thank you
Usually I do not post comments on blogs, but I have to tell the rest of the community that this is the best system to unlock iPhones, I spent all night looking for a good one and tried in different languages and this tutorial is the best ... good luck to all and Remember to leave the SIMcard outside during the activation process.
Thank you very much Perfect update !!
Greetings from Mexico
I really appreciate the information and I confirm that everything continues to work. Although the years go by hahahaha
Hello, the problem I had with the SIM coverage was because the update of the iPhone 2G to version 3.1.3 was done by downloading it with iTunes and updating.
This is an error since you have to download the firmware from a site other than iTunes and then select it by pressing the corresponding key (if it is mac or pc), to update it.
Thanks for all the comments on this forum.
regards
an easy and simple question for a lot !! I have an ipod touch of 1 or 2g I do not remember well the subject is like this! I want to jailbreak but I can't get the firmware for either of the 2! According to what Apple read, I delete them or I don't know what's up! Is it possible to get or some way to do the jailbreak? Thanks a lot!!
Excellent, thank you very much I just did it, there is no problem with the phone, or with wifi.
Download Installous… .. download the first app
Thank you……. !!!!!!
men a question can I upgrade from iOs 3.1.3 to iOs 4.0 ???? I have a 3gb iphone 16g with firmware 3.1.3
Friend, I congratulate you and thank you for this tutorial that despite the time continues to work 100%
Excellent thank you very much
Of corduroy, you are the best, I was already crazy but this tutorial left me my iphone up to date I do not comment or anything like that but this is worth it, thank you
You are my idol, you saved my iPhone life
Very good tutorial it worked perfectly with 2G and 3G… Thanks Greetings!
wey neta thanks my iphone already works and all thanks to you the vdd nunka commented a tuto but this one deserves it you lusiste thanks
for those who say that the redsnow does not recognize the firmware is because they are downloading it with the internet explorer they have to download it with the firefox this browser does not modify the file and leaves it in .ipsw I hope it works for them
Thank you thank you thank you
🙁 does not go from waiting for reboot… ..
What I can do?? I already canceled it and did a million times again ...
helpaaaaaaaaaaaaaaaaa
Vato you are a merga !!!… thank you very much !!!
Thank you very much, you saved me from throwing my iphone away .. take care, greetings ...
brother you are maradona !! the best update and jailbreak tutorial I've seen
Hey, it was great, you are the tough guys in this pod, I managed to solve many problems with my beloved Iphone 2G, thanks a million
It does not come out in any way because it is 3.13 and I downloaded 3.1.2 and it does not come out of dfu mode
You passed Brother The Best Tutorial I have seen Thank you ... It worked for me 100% ...
I do not know how to thank you!! As everyone says the best tutorial I have found, super well explained and with all the files, thank you!
Really thank you very much!!! great for me everything worked! I was really desperate! very good post !!! ; 0)
Thanks this is an excellent Tutorial !!!
easy…. with all the data !! How are you doing things well done !!!
Thanks a lot…
You are the ostia, I was shitting for losing my iPhone. Thanks for this tutorial.
Regards!!!
excellent tutorial..congratulations
You are a blowjob! thanks for this tutorial!
Thank you very much for the tutor, I was very good, I congratulate you, my brother served me and the iPhone works perfectly for me.
Excelent brother!
Super!!! An excellent tutorial thank you very much.
Excellent, thank you very much, first tutorial that works after 30000000000000000000 tries…. XD
very good solution after searching for everyone, thank you very much.
Good night, look at the last step, I achieve, put the iphone in dhu mode, but anyway I see the poster that I consult on YouTube and I already do it and trying several times 🙁 I hope a prompt response, greetings
It worked and I was able to restore it !!
Thank you very much for getting me out of trouble, because when I updated the ipod everything went to hell
Excellent! .. Even though the unlock option did not appear, I did not use iTunes to enable the iPhone !! Very good contribution!
Hello I have a problem I did everything perfectly but the last step when I finish doing the Press the "On-off" button.
Without releasing this button, press the "Home" button. (Home + On-off).
Release the "On-off" button.
It will start working by itself and the Home button is released.
load the first fast bar the second one and says »Waiting for reboot» and the iPhone stays there off and time passes and nothing reacts I need a hand since I am left without a cell phone at this moment !!! I've already done others and never a problem, this is rare!
FRIEND YOU PASSED !!!!! IT WORKED FOR ME AT 1OO .. I WAS LOOKING EVERYWHERE FOR A SOLUTION AND I FOLLOWED THIS AND PAMM! ALL BKN THANKS!
Hello, excellent Tutorial, I already released 2 iphones lol !!! Graciiiaaaaaaaaaaaasss !!!!
How about a friend, notice that I live in Mexico and I have an American iPhone 2g and I already updated it and restored it and downloaded the two firmware 3.1.3 to use it on iTunes and 3.1.2 to use it on Redsnow 9.4 install the cydia but it does not release it from at & t what am I doing wrong ??? I already did it at least about 3 the whole process and nothing ,, nothing, nothingaaaaaaaaaa (hehe I'm already half desperate) I thank you if you could advise me
discula in step (3 -) where it says: Download the Firmware 3.1.2 to the computer, could you put a link where I can download the firmware for the iPod touch 1G is that in the places I look for the firmware it appears in parts (1 and 2) or the 3.1.2 just doesn't appear
please.
ho is there a problem if I download the 3.1.3?
Hey compadre, I thank you very much, notice that I already had several days of being tried because by mistake I updated and the release that I had done was damaged so I tried with several redsnows but some redsnows get stuck because they are not compatible with the ios or for something else even some redsnow didn't even detect the ios and it threw me that I had not found it later another problem that was present was that of redsnow "waiting for reboot" this post should go to taringa too many have problems for anything and this works perfectly thanks Master XD blessings.
Thanks for the contribution, mate!
It was the last chance to save my iPhone before I got rid of it.
Everything perfect the first time!
regards
Hello, look, I did everything as you indicated in the tutorial, and it worked wonderfully, I only have a problem with the network and the operator, it does not recognize any, and it has no signal, I am from Costa Rica, it will be some problem with Baseband or something like that,
I would appreciate it too much if you could help me
thanks ..
waoooo I've never seen a tutorial so well explained brother you know about this I really liked this tutorial. greetings to all
eyyyyyy manyisisisisisimaaaaaassssssss thanks for your tutorial, it is very good and it works perfectly !!!! Congratulations!!
it stays stuck on the hard disk and does not reload how long it takes or the famous pineapple comes out when restoring thanks
When I thought that everything was going well, suddenly, when it warns you about the icons and says "dimiss", when I touch it it does not detect me or accept me ... what happens? Thank you
Simply incredible ………. I had tried with other tutorials and it was impossible, with this one it came out the first time and working deeeeluxe !! Thank you
Hi there! I ask if someone can explain to me why when I do all the steps as the tutorial says, at the end of the installation on the device the booatloder 46 gives me an error.
erro reboot or something. Please ask someone to explain it to me. Thanks a lot
The best post I have found, it has never been so easy for me to Jailbreak my iphone… Thank you! 😉
Diego I need to know if you have any way to raise the BL from 3.9 to 4.6 to in iphone 3 G, in advance I thank you for the help. regards
Thanks for this valuable information, you threw it out of the stadium ,,,,
Friend, all very well, I congratulate you for the contribution you have given, but I have a problem, do everything as is, but when I introduce the sim, it does not recognize me what could have happened? Could it be that I did something wrong? I started to check the settings and the phone number appears but it doesn't grab me a signal ... it helps !!!!!!!!!!!!!!!!!!!
What a past man !!!
Thank you so much… I had no idea how to unlock the iPhone that my girlfriend had given me when she bought the iPhone4. I updated it with itunes and as they say out there ... I turned it into a brick, but thanks to your tutorial and without even having a PI .... everything solved.
You're the best!!!
A greeting.
EfraBbDoR
Restart the iphone or disconnect the 3G and reconnect it.
If it doesn't work, tell me what kind of iPhone do you have ...
100% perfect! Thanks a lot!
I have a problem with an ipod touch 1g, after pressing and releasing buttons, when it says "uploading ramdisk" I get an error saying "redsnow.exe stopped working" and the ipod stays on the screen that says "Downloading jailbreak data … ». For what is this? could you help me with this? Any suggestion. Thank you.
hello friend I have a 1gen iphone and it can't get out of DFU mode it tells me to insert a sim card and put it and it stays the same »usb, itunes icon and it says No sim card installed» could you help ME with this big problem? 🙁 my iphone 1gen and I are very sad: / well, I'll leave you my email: G_abo91@hotmail.com please help me 🙂
I will try and then I will tell you, they tell me those who know that there is to open bands again and a long and delicate process and they charge me a fortune, I better try here
In iTunes I don't get "restore" I get the message that the SIM is not compatible, I don't know what to do so that ITUNES gets me "restore" and continue with this procedure, what do I do? Thank you
Thanks for the tutorial, and I had not used my iPhone for a day because it had blocked me, but now it is fixed. Thanks for the help
Hello Thank you very much for the tutorial, I had been trying to revive my iphone for days, until I found it. Thank you again
At the time of doing Shift-restore, the restorer is gone, there is no extension that is .ipsw.
thank you (using a windows PC)
Thank you very much, at first a little shy but all with a good ending !! thanks excellent post !!
Hello, I have a big problem, I carry out all the steps you mention, only until the last when the reboot starts, it sends me an error message of a bl46.bin file and it simply no longer starts the iphone, only the screen with the apple and it no longer starts, it is a 2G iphone I hope you help me !!
Good afternoon ... I have read what you published and that was a problem I had a long time ago ... at this moment I just jailbroken my iphone 2g and it turned out without problems ... if you want, add me to this email and we agree to send you the bl what do you need ... LOBO_THE_BEST@HOTMAIL.COM
Francu, have you solved the problem? how did you do it? I cannot do everything in another operating system, in my house there is everything Mac ...
francu performs the same steps but in another operating system! regards
The same thing happens to me as Francu and now the iphone is not recognized by any software ... I can't do anything else?
Frank:
Instead of this tutorial. Do this:
https://www.actualidadiphone.com/2010/02/06/tutorial-jailbreak-con-el-custom-firmware-3-1-3-modificado-para-el-iphone-2g/#comments
I can't give it restore. When I connect my iPhone 2G to the PC, iTunes opens an option to activate it with at & t and when I click cancel, it tells me you can now eject your iPhone. I can not do anything!!!! I'm on the screen for: Slide for emergency. PLEASE HELP
You just have to do the tutorial of the link that you have right in the message that is above yours
I saw your tutorial but when I connect the iphone2g it does not show me the option to restore !! because itunes directly sends you to activate it with A&TT or whatever that is called ... the cable comes out and itunes on the iphone screen that is the problem ... how do I do with your tutorial if it does not come out to restore ????
If the ios you had is 3.1.3, continue the process above
At the end of everything, the morning stays and nothing happens, the hard disk appeared, then the pineapple and at the end a gray box, what happens?
If you have a 2G do the same thing I told christian
Hello, friend, I have an iPhone 3g and I just want to give the Verbose boot application and I do all the steps, when I finish I get the hard drive, the pineapple and a black box with the apple, then starts throwing me a screen like if it were the boot of a pc, then at one point it stops, restarts (again the screen with the apple) and the boot comes out again ... what is the problem?
Hello, my name is ivan from Colombia. I have an iPhone 2g I had jailbroken this forum before seeing it, but after doing it, the sim does not recognize me and I could not find a solution.
Excuse me, this tutorial also applies to the first generation iPhone ???? salu2 and grax in advance
we the 2g and the first generation is the same
In the tutorial you already specify it: iPhone 2G
Thanks for the tutoring, it is easy to understand and to do, I have never had the courage to try it, but because I installed a program to gain more ram on my iPhone 2g, the battery only lasted a maximum of 10 hours in stamby and I could not completely cancel it , I had no other option but to restore it, thanks again.
Guys, I did the steps as half and now the iphne 2g does not connect me to the itunes store… .. and without that I cannot give it the option to restore… what do I do? my mail is pquinte10@hotmail.com…. I am desperate I would really appreciate a help!
It worked perfect!
You just have to put it in DFU mode and do it again.
Either put it in DFU mode and install this firmware: https://www.actualidadiphone.com/2010/02/06/tutorial-jailbreak-con-el-custom-firmware-3-1-3-modificado-para-el-iphone-3g/
the problem is that it does not enter the DFU mod so I can't give it the option to restore…. They gave it to me and since I have it, it is as blocked ... the screen does not work either ... but it is perfect without a scratch ... will it be bad or is it a software thing?
From what you say it must be a hardware problem
Hahaha !!! after a long time without being able to use my iphon 2g it is already active again, thank you very much, the tutorial is still active and it has helped me a lot.
Thanks
Hello, I already described everything, but on the screen of i tunes the restoration option does not come out to start as I do, please help me !!!!
If you select your device in iTunes, you must get the Restore option
Hello, I follow all the steps, but when the iPhone follows the process on its own, it turns on again and I get the screen that I connect it to iTunes to activate it again. Any other solution? Would this card be worth me http://www.dealextreme.com/p/universal-activation-sim-card-for-iphone-2g-3g-3gs-4-42595 to activate it? Can I use any sim phonebook?
Greetings and thank you!
To activate it you need an original Sim from the iPhone operator.
This is a jailbreak tutorial, NOT a jailbreak.
Excellent!
very very good all the steps exelent !!!!
sorry this can be done well is that I have the iphone 2g with the filmware3.1.3 and if it works with this description?
That is what it says in the tutorial that can be done with your iPhone.
You can also do this:
https://www.actualidadiphone.com/2010/02/06/tutorial-jailbreak-con-el-custom-firmware-3-1-3-modificado-para-el-iphone-2g/#comments
I had a hard time putting it in dfu mode but
I managed to activate it, thank you very much!
Hey, it went well, but when opening cydia it takes a LOT, it's a 1g ipod
That is normal, your iPod is already quite old and the current Cydia is much heavier than before to open.
The same goes for the iPhone 2G and even the 3G
Friend, the redsn0w does not accept the 3.1.2 and there I die I do not know what else I can do, please help me.
Hello..! I have an iPhone 2g and the other day I am not going well and the Cydia did not work for me, I restored it and when I turned it on it gives me the iTunes logo and the USB and if only I can make emergency calls and when I put a SIM card I won't read and I think it's blocked and I don't know what to do.! Someone can help me please because as my parents find out that I have to pay to unlock it, they kill me jejhejeejjej and thank you very much for everything
we what you have to do is that if itunes recognizes it and gives you the option to restore then download the ios 3.1.3 and then do the process that is in this tutorial
And if it no longer gives you the option to restore because you already changed the sim and if you remember the ios with which it was when restoring it, then look for a release with that ios
Hello everyone. My problem is the same as Melvin's: I have an iphone 2g and redsnow tells me that when I hit firmware 3.1.2. that "unable to recognize specified IPSW".
I downloaded it directly into ipsw, I haven't changed anything and the icon that comes out is a cube with the drawings of a musical note and an ipod.
I was able to smoothly do the 3.1.3 firmware step from iTunes.
Could it be due to the RedSnow version?
If anyone could help me, I would appreciate it because I can't find the solution anywhere.
Thank you very much in advance!
Salu2
- Melvin:
Use 3.1.3 and if you have a 2G do the same as I tell Daniel and Beatriz
- Daniel Hernandez and Beatriz
https://www.actualidadiphone.com/2010/02/06/tutorial-jailbreak-con-el-custom-firmware-3-1-3-modificado-para-el-iphone-2g/
Excellent !!! I was perfect thank you very much !!!
It served me 100%, thank you very much for the tutoring… you got a 10! 😀
bro, the only thing missing is that starting everything, put it in DFU mode and start running everything, but after it finishes and releases the home button, iTunes closes and it stays on the iPhone. or is it normal ???
Thank you very much I did it the first time with an ipod
Hi, I have a 2g that I restore by downloading the iTunes OS and then I get that I put a valid one to activate the iPhone, if I do it from step 4, will it work…?
Javier
Sure it will work if you do it right
Hello! I understand the whole tutorial but my problem is that after putting my iPhone 2g in dfu mode and connecting it to itunes when I restore it and I look for the firmware that I downloaded and I tried to open it, it tells me that there is no file Valid and if I change the termination of the file name from dfu to ipsw then if it finds it but it tells me that they are incompatible, when I download them they are compressed, I extract them and they leave a lot of files but none of them is worth it. ??Thank you
This occurs because your browser, when downloading it, transforms the .ipsw extension into .zip or .rar.
You just have to change the extension .zip or .rar in .ipsw. Without or it works for you with this, is that you do not change the extension well or because you do not download the file that corresponds to your iPhone.
You can also use another browser like Firefox
send me your email and I'll help you
Thank you very much for everything, update an Iphone 2G from 3.0.0 to 3.1.3 at the first time. It has been a pleasure to find this website, I had been wanting to update it for a while but I didn't dare (that's why I was left without a phone) but as I said, fast and simple. Very well explained. Thanks a lot.
The truth is that I have no words to thank you for this post… You're a Great !!!!!! I've been downloading programs and fixes for a week to be able to JailBreak my iPhone 2G and they all gave me an error ... until luckily I came across your instructions and managed to do it without any problem, without errors, without wasting time ...
The truth is that thank you very much….
I don't know if you can rate this user, but if you can, please advise us to give it the highest score ...
A big hug to you and the entire group of developers who are behind this type of SW that allows us to use technology.
SCORE: 100% positive !!!!!!!
Sorry I have an ipod touch 1g, I do all the steps but in redsnow when I put it in dfu, it does not accept it, it tells me that there is no device, and I already tried another version of redsnow and neither did I?
Thanks, it worked perfect for me
hello I have an ipod touch 1g I already did all the 3.1.3 jailbreak but when loading the cydia it stays in loading data and I can't enter the repos… .. I need help… ..
You will need to do the same to restore cydia if you put me in for the first time if you enter well and take advantage of what you are going to do because when you leave and you get back in, it is keda loading and it does not come out
Hi there ! I want to jailbreak an iPod Touch 1g, but I can't get iOS 3.1.2. Does anyone have a link that works? thanks!
Megaupload is no longer available please other download links
Great, this one served me wonderfully, now I'm going to see if the SAM works for me.
It worked perfect for me thanks and congratulations for the excellent tutorials
Good evening .. I have tried to carry out each step of the tutorial .. however, even when I downloaded 3.1.2, when placing it in the browser of redsn0w 0.9.4 .. it does not allow me and from there I have not been able to do anything else! .. I need URGENT help !! .. Thank you very much !! ..
Thank you very much for the tutorial, I really followed the steps and there was no problem ...
PS: many of the links were blocked, but you can search for the same files on other sites and it will work the same way.
Thank you very much for the tute menu!
}
change the man links, they are in megaupload and it is blocked
TELL ME UNABILE TO RECONOGIZE SPECIFED IPSW
I did it the first time and although it was not easy to find the firmware and the bootloader, the iPhone was left …….
thank you very much
thanks in a million
GOOD MORNING ..... MENU GETS ERROR WHEN I GO TO select Firmware 3.1.2 through the
the redsnow 0.9.4, click on "Browser" ...... the same error appears as the other menu on the page
says: UNABILE TO RECONOGIZE SPECIFED IPSW
Is the part that says uploanding ramdisk to last a long time? I've been here for a while and I'm not going: S is left with only 8 rallitas
Hello people….
Great tutorial…. but since i install 3.1.3 on my 2g, i don't have wifi.
Because?? what do I do??
Thank you
Thanks a lot. Perfect. The only thing that has been put in English and I don't even understand dad, but thank you very much
very good but change the links some are outdated girls I want them
Hi, I have just one question, my iPhone is already jailbroken, if I jailbreak it again, will something happen to it? please get rid of this doubt.
The help was very good and a thousand congratulations, I was looking for several days and had not been able to solve until I found this page.
hello I have problems, I did all the procedures but I do not get the option (unlock) and I can not use the iphone only emergency calls and the itunes symbol and the cable ... what can I do, thanks I am waiting for an answer ...
hello friend just get an AT&T sim ILISTO NESECITAS INTERNET AND CONNECTED AITUNS
thank you very useful
You have saved my life. Here in Venezuela it is expensive to repair or install the software on the iPhone, and I had been looking for more than a year to repair my iPhone 2g. Thank you, really thank you !!!
I love you, yeah
I don't get the restore option ,,, I get «it seems that the inserted sim card is not compatible»
what you have to do compadre is while the phone is connected to iTunes and with that message, is to do the following: turn off the phone. Press the middle button «Home», for 3 seconds, immediately afterwards. press HOme + Power for 10sg, finally press home for 15sg and voila, the message will appear on iTunes to be able to restore the iPhone
Thank you, you have saved my life 😀
I have an ihpone 3g model a 1303 without activating because it is not original and I do not have the sim I want to know how to release it since it is not activated
create an activated firmware
I have a 4S, but I wanted to upgrade the old 2G bought years ago in the US and it crashed. With this tutorial it was unlocked and released again.
Thank you very much
Help porfisss, I do the whole process and it gets stuck in step 8 it only tells me waiting for reboot and from there it does not happen, what can I do
Do you remember that before you say that, it says before you press the button to turn off then leave the home button pressed and release the turn off button and so that you do not get left in reboot, do not release the home button, leave it pressed for a longer time and you will go ahead to the next I ized it barely two times and it worked well for me but… ..the itunes no longer recognizes the iphone
I ekivoke the itunes if it reads it eske in 3.1.2 it would not read the itunes the iphone but see that now I can sinc my iphone is something new because I already thought about selling it to this software on 3.1.3
help me please I have an iphone 3g and download a new version and I am in recover mode and in the end they ask me for the original sim and I do not have it, I have seen some people who can unlock it without original sim if someone knows please help me! I would appreciate it too much
When I want to download step 4 and 5 I get a legal notice from the FBI that I do there
Download it from the other side !! search in google the best option, on the snow network !!
Hello, I have a problem, in step # 3 of STARTING I do not get the redsnow 0.9.4, nor the "Browser" and on my iphone 2g I only get emergency calls, what do I do ??? Thank you
menu I have a problem at the time of doing the redsnow that the screen is blank of there is nothing that I have to do. my email beikel-17-18@hotmail.com If you can help me, I appreciate it
It worked great for me .. Thank you very much for the information
GREAT! Thanks! You just got me out of A Good Problem… Although I had to look elsewhere for the Links! : /
more than great! you made my day!
It works 100%. Thank you. !!!!
Mine is blocked, I just have emergency calls, what do I have to make?
They are the best they served me a lot! Thank you!
you can with the 3g I have the finware 3.2.1 it can be updated to any version I await your answer thanks
HELLO THANK YOU VERY MUCH FOR THE TUTORIAL, ONE PLEASE, EVERYTHING IS GOOD ONLY THAT AT THE TIME OF MAKING CALLS, DO NOT LET ME SEND ME TO ERROR, IF YOU REMOVE AND RECEIVE MESSAGES BUT YOU DO NOT MAKE CALLS ONLY RTECIE THEM, I HOPE YOU CAN SUPPORT ME. AND A DOUBT CAN USE THE INTERNET, MY IPHONE IS AN EDGE 3.1.3
gey thank you very much it works I have a 2g I almost threw it away haha but everything went well thanks
gey thank you very much it works I have a 2g I almost threw it away haha but everything went well thanks
Hello, I know that some time has passed and in fact this notice, but will you have the firmware for the ipod touch 1g again? or what do I use? What I can do? sds
He Stays Frightened In "Waiting For Reboot" 🙁 Help
I installed cydia on my iphone 3g but when I open it it puts me reloading data and it never takes off that helps
How long does the last process take?
and I can put whatsapp
Help gets stuck at the end, he is always left with the apple screen :( and it doesn't go from there!
friend just put in recovery mode see a tutorial how to get connected to itunes and voila
Hello At the end of the process on the phone only the apple comes out and restarts several times but only shows the apple.
What should I do?
Thanks to your well-described steps I did it by myself .. and that I am half brute for these things .. a hug and thanks again ..
a question if I give it in custom boot logo is there a problem ?????