Manual: Jailbreak, Unlock, Activation, BaseBand, 3GS and derived problems

Jailbreak

Even today we continue to see questions in the forum and in the posts that, for the most part, are resolved on this website. But since we understand that the search engine is not a very appealing idea, we are going to summarize in a single post that we hope, which together with novice manual (I link it for you to read, remember that the programs to release and jailbreak have changed), be one of the most read on the Web.

We clarify again between jailbreak y Release:

  • jailbreak: consists in unlock iPhone. So that? To be able to install all the applications we want, all the modifications that exist, to change the colors, access all the iPhone folders, install cracked apps ...
  • Break free: is the classic term for the word, cIt consists in modifying your iPhone so that you can use it with Movistar, Vodafone, Orange, Simyo and all existing companies and to exist. Requires jailbreak.

Behind this: Can we have Jailbreak without Unlocking the iPhone? SI Can we unlock the iPhone without having Jailbreak? DO NOT

  • base band: It is something like the base of the iPhone, updating it improves the phone but usually makes it unlocking. How is the BaseBand updated? With iTunes, updating to the latest version of Mac OS X iPhone available and making it official (modified or customs are not valid). After updating then you will already have the last BaseBand. If we already have 3.1.2 and the BaseBand without updating (we have 4.xxxx) we have to force the update or restore (we will explain the update):
  1. We connect the iPhone.
  2. We open iTunes.
  3. En Mac we press Alt, Windows Shift Y "Search Update » and now we will have to look for 3.1.2. Don't you know where it is? Well, in order not to complicate things, lower it from here (select 3G or 3GS).
  4. Once selected, it will begin to update, thus raising the BaseBand).
  • Activation: According to GEORGE HOTZ, when installing Blackra1n in your terminals and when installing Snow the terminal will be activated (This in case you are not from Movistar)

Jailbreak:

Now it is very simple:

  1. We connect the iPhone to the Computer.
  2. We open iTunes.
  3. We give «Search Update»And install the latest version (Currently 3.1.2).
  4. We let it update, it takes between 5 and 10 minutes: it does NOT erase the agenda, it does not erase the legal Apps, it does not erase the music because we are UPDATING and not RESTORING (which is basically like formatting the computer, a term widely used by the "Winderos").
  5. Once updated we get off Blackra1n de here.
  6. We open it.
  7. With the iPhone connected we give "Make it ra1n".
  8. If everything works, it will turn off and after a few seconds it will turn on showing a photo of the creator of the App (what an ego).
  9. If it does not work you must press the button To unlock and Home (the one above and below the screen) at the same time until the hand appears and the iPhone turns on again. After this, try to use the program again (repeat until it exits).
  10. Once it is turned on (if it has been successful) an App called «BlackRa1n«. We enter it and there we will have several options to install:
  11. Uninstall Blackra1n (to delete the application this does not imply deleting the Jailbreak eh !!)
  • Install Cydia (It is an app that will allow us to put a real control on our iPhone [essential to have it]).
  • Install icy (it's like Cydia but faster but lower quality)
  • Install Snow (used to unlock the iPhone [essential to be able to use the iPhone with other operators]

Break free:

- As I have already said, we simply follow these steps:

  1. We open Blackra1n on our iPhone.
  2. We install Snow
  3. And that's it, it will do it automatically, then put your card from any company and you already have it (if it does not work, restart the iPhone and try later).

- If we have done the Jailbreak with Blackra1n but it is with another version in which the Snow App does not appear, the program itself will tell us that we must update, so update and then follow the steps above.

- What if we have not Jailbroken with Blackra1n? Well, we have to add the reservoir blackra1n.com, as?:

  1. We open Cydia, go to the "Management" menu, then to "Sources".
  2. There we click on the + sign and type blackra1n.com.
  3. We wait for everything to load.
  4. Then under "News" BlackSn0w will appear.
  5. Just install it and reboot just in case.

For the 3GS:

Apparently Apple released a series of iPhone 3GS before Jailbreak that does not allow these processes to work, so we can not do anything for now. However, not all 3GS are capable.

Posible problems:

-Wi-Fi: I do not take the networks.

  • Solution: on the iPhone; Settings> General> Restore> Restore Network Settings.

-Push: it does not work (the truth is not my case).

  • Solution: soon in Cydia (Push Fix may work, in my case I had to restore the iPhone and then everything worked).

-Others: surely you have other problems not documented by the creator of Blackra1n, in general they are due to Restoring an iPhone backup.


Follow us on Google News

93 comments, leave yours

Leave a Comment

Your email address will not be published. Required fields are marked with *

*

*

  1. Responsible for the data: AB Internet Networks 2008 SL
  2. Purpose of the data: Control SPAM, comment management.
  3. Legitimation: Your consent
  4. Communication of the data: The data will not be communicated to third parties except by legal obligation.
  5. Data storage: Database hosted by Occentus Networks (EU)
  6. Rights: At any time you can limit, recover and delete your information.

  1.   alexisv635 said

    You need to comment on the problem that some iPhones are suffering with YouTube.
    The solution is (and I am witness that it works) that irony, install Push fix on the iPhone with that problem, then just reboot and that's it.
    Youtube already works

  2.   iXMB said

    There I read that you can use an IPSW so that the native tethering is activated, does it work? Regards.

  3.   Alberto said

    Hello…

    excellent summary of the steps, I would only have one question, I have my iphone with firmware 3.1.2 but with the restore method created by PWT.

    I would like to know what is the improvement when updating the baseband ??? Is it true that the phone improves ??? because??? A sentence I read that says that it improves the functioning of the equipment does not seem so logical to me. Does anyone have a complete explanation on that topic ???

    Ami it works flawlessly with the custom firmware, will I have to change it?

    sorry for so many questions ...

    regards…

  4.   cokegh said

    Thank you very much for the work, but I would add something else:

    - How to make (step by step) the backup of the entire iPhone so as not to lose legal apps, or "test" apps, or "cydia" apps, or saved games, or program settings?
    - How to save all downloaded emails on the iphone?

    In short, how to leave the mobile exactly the same but updated?

    Thank you again.

  5.   Henry said

    I am one of the new users, last Saturday I bought one at the apple store in manhattan here in new york and with surprise I saw that when I released it on nov 3 with blackra1n it reappeared that it would connect to iTunes but the only thing certain is that disabling the autolock and disabling the syn atumatic in itunes the iphone does not bother, however, in each restart you must connect it to Blackra1n ahh and something else only works in Windows in Mac try all the ways and it does not work in mac… .. in windos works in one… .. luck to all and those who have their new phone do not worry that Geohot or devteam is already planning how to counterattack this move by Apple with the Boot… ..

  6.   diaz said

    derivatives ???

  7.   July said

    Hello, what about those of us who have a classic iPhone? the 2G? how would be the process to update to 3.1.2? Thanks

  8.   Ehl hortojrafiko said

    Derivados is with V!
    Kill me please! But don't make me read that :(!

  9.   Javier said

    One question, is it valid for the new touchs? or just for the iPhone?
    Thank you

  10.   txistu said

    Has anyone checked that blackra1n activates the iphone? This is the first place I read that it does that. In many others they said just the opposite.

  11.   cyberdiego said

    please someone bring me a guide dog,
    I just went blind.
    http://www.googlefight.com/index.php?lang=en_GB&word1=derivado&word2=deribado

    oh mother of the beautiful love!

    apart from that the very good manual

  12.   Alvaro said

    The Deribados thing is a joke, right ???

    DERIVATIVES please, my eyes bleed.

  13.   Carlos said

    Hi, I have the 04.26.08 baseband and I want to update the firm to the last one with the blackra1n process, would I upload the baseband? What would I have to do to not upload it?

  14.   Jordi said

    @Xes: If you want some advice. You go to file a consumer complaint.
    It is true that once a product is purchased in an establishment, in situations of defects or similar they replace it or make vouchers to spend in the same establishment (I do not know to what extent that is legal).
    The fact is that you have not gotten to buy any product for that outlay (and considerable).
    I have my doubts as to whether the practice they have had with you is legal.

    Apart from this, the entrance is great.

  15.   X's said

    @Jordi: When I called consumption to ask what I should do, they gave me the steps you are taking. They told me that if I pay for a product and they don't give it to me, they have to give me my full money back, since I'm not the one who doesn't want it now, but they are the ones who don't want to give it to me. This afternoon I will return and in case of more negative, I will send a letter to Movistar of complaint and I will ask for a sheet of claims to the idiots of the store. See what happens.
    Thank you.

  16.   pepe melons said

    🙁 I am one of those who have a new 3gs and when applying the jailbreak, every time I restart the phone, I have to reseal the blackra1n so that the phone starts up: (((((

    I'm screwed up!

  17.   jordi said

    Let's see, forgive my ignorance.

    I have a 3Gb iPhone 16GS from Movistar from a month ago.
    I jailbreaked him with the blackran, I haven't released him.
    My question is: once the new update comes out, I currently have 3.1.2, what will I have to do? I will not be able to update directly?
    And the other question is? As I have it now, can I do a restoration? Will you follow me with jailbreack?

    thanks!

  18.   jordi said

    Ah another question. Install cydia, install appsync I did the correct steps to install pirated apps. They are installed correctly for me, but they are not updated. It is normal? What can be done to update pirated apps from the iPhone appstore?

  19.   Desjek-T said

    Mundi, is it true that push notifications work correctly after following the process?

    Do you think it would work for me if I have an iPhone 3GS from AT&T USA, which I can use with an Orange card?

    Greetings and thank you very much !!!

  20.   PAUL said

    Hello good morning, the truth is that I am totally new and NOVICE in all this, we go that when I read I was surprised by the amount of things that a gadget like the iPhone had. Well I tell you, I just bought an iPhone 3GS, but I bought it from strangle one day when I went to a market and I was “lucky” that someone offered me this iPhone, and after seeing that it worked and given the price Well, I bought it, even though I was unaware that there were so many problems to be able to use it. The thing is that I have a mobile phone and I tried inserting my sim card in the iphone and that goes, there is no way to recognize my password. The girl from a phone store I went to ask told me that this was because I had not bought the iPhone in a phone store and that they could not activate my cell phone. WHAT I DO? I hope you can help me because I am desperate. Oh and I don't have a mac or anything like that, I just have my simple windows laptop. Thank you very much for your help.

  21.   Jordi said

    Forgive the Off-Topic:
    @Xes: Right, especially the claims sheet and that from consumption they tell you how to channel the documentation to provide.
    It would not hurt if you set up a pitote in the establishment, if you have little desire. The more than € 500 you have paid are worth it.
    This type of practice is very courageous.

    Regards and good luck.

  22.   Melon said

    I would also like to know the supposed "improvements" of the baseband 05.11.07. More clarity, please

  23.   Aix said

    @Xes: I'm going to tell you a couple of things as I sincerely hope they don't bother you.
    First of all, how were you so stupid to pay 511euros when for 100 more you have it free of origin and at the moment, I have always seen that basic, try to flee from Movistar and if you do not save anything, I will not tell you ...
    I suppose it is because you have a contract but still spending that money would be better for you to get your 3G and sell it and a new 3GS free using it with your contract and data rate.

    Now that everything has happened, you must do that claim sheet and consumer complaint, but I warn you that if you recover the money, I see it difficult, but if it happens it will be in a long time. The best thing you can do is screw the head of the store very fat, give him the maximum possible pain so that he can get it back, because if you go for the legal thing, what I said before will happen to you.

    Good luck and may the force be with you

  24.   supereloyo said

    The IBEC, IBSS and ECID codes must be saved or is it no longer necessary ???

  25.   George said

    How do I know what is the baseband that my iphone has ???

  26.   Jordi said

    @jorge: Settings, General, Information, Modem Firmware.

  27.   Raul said

    I would also like to know the supposed "improvements" of the baseband 05.11.07. Well, I have the 04.26.08 and I am with the 3.0 GREETINGS FROM PERU

  28.   rakenho said

    Hello everyone, is it better to do the jail break with a custom or go up to the band and then blackra1?

  29.   Eduardo said

    As I have read up there ...
    What happens for those of us who have an iPhone 2G
    is this tutorial useful with blakra1n to update it?

  30.   Coco said

    Sorry no..my question .... but do you have to keep the company chip in place? Or do we put it on when we finish everything?
    Muuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuu thank you ...

  31.   Melon said

    I answer the question that we have asked several (myself included) about the improvement of the phone with the baseband 5.11.07. Taken from the Dev-Team blog:

    «Those of you who are already unlocked at 3.1.2 because you kept your 04.26 baseband now have an extra cushion of comfort, and more choices: ultrasn0w, purplesn0w, and now blacksn0w (and of course the original yellowsn0w too if you're still back at FW 2.x). Whether or not you choose to update your baseband solely to use the new unlock is a personal choice, but so far there are no advantages to doing so (and remember you can't come back to 04.26 after you've gone to 05.11). »

    In other words, there are NO ADVANTAGES IN THE BASEBAND 05.11. So those of you who already have the phone in firmware 3.1.2 but with the old baseband it is not worth touching anything.

  32.   the wormboy said

    I have a little problem !!!
    The original AT&T iphone was 3 months old as a paperweight and when the famous Blackra3n came out on the 1rd (x right, thank you very much to the author)
    The problem is that no application starts, you give the icon it starts to load and the second it returns to the main menu, I repeat, no application works, I also deleted them and downloaded them again and even then no application is started !!!

    any ideas??????

  33.   the_one said

    If someone after releasing I jail the wifi does not work try this:

    go to ; setup ——- general —— restore ——- network settings.
    After reboot

  34.   the_one said

    Sorry I did not read the guide well.

  35.   discover said

    Thanks for the guide. My question is whether I should keep iTunes open when I run blackr1n or should I close it.

  36.   discover said

    I forgot to ask if it is possible to know if a 3GS is enabled, any way to know the version of the iboot?
    @the wormboy: I read that this problem was solved in iTunes by activating the synchronization of the applications, try to see ...

  37.   Diego said

    the jailbreak with blackra1n can be done to the ipod touch 3G ????????

  38.   aikonstoc-com said

    Hello, I have an iphone 3gs 32gb
    Problem that I have, iPhone is from a strange company
    I don't know what company it is, it can be Taiwan
    I want to activate it, that is to say that it appears menu
    Now I get an emergency call
    and nothing else, with blackra1n it cannot be activated
    with custom hacked, what I tested gives me an error
    Can somebody help me ?

  39.   Victor said

    Hello, thank you very much for the manual! it's great for newbies like me !!!

    I just have a question that has arisen when reading comments pro ai ... I have an iphone 3gs of 16 gb V 3.1 I have read by ai that with the new ones there is a problem k if the mobile is turned off because of the battery or something like that … To start it you have to connect it again and jalibreak it again… is that true?

    and another thing ... is the warranty lost when doing this?

    Regards, and thank you very much!

  40.   the wormboy said

    (DISCOBER) now I will prove it thanks !!!

  41.   Henry said

    Well if you say that the one you have is with
    version 3.1 I suppose it is from Los viejo el
    problematic that only boot connected to
    the pc is only for the new 3gs
    maybe 1 month to here…. Nevertheless
    putting the iPhone in dfu mode and
    entering the system profiler on mac…. Anyone
    concern you let me know ...

  42.   muloc said

    It works!!!! Thanks for the guide.

  43.   Stan said

    Excellent Brother… It works perfectly

  44.   Moncius said

    Point 11 is sovereign stupidity.

  45.   elf said

    I have already done all the steps to make the «Jailbreak» to my iPhone 3GS, and in principle I think it has gone well.

    I'm a bit fishy at this, and I'd like to know what I have to do now to install Cydia.
    Saludos y gracias

  46.   discover said

    @elf:
    -Launch BlackRa1n from your iPhone screen (make sure you have internet via Wifi or 3G)
    - The “installer application” screen will show Cydia, Rock and Sn0w. Select Cydia and Sn0w (Snow if you need to unlock the iPhone)
    - Click on the Install button located at the top right.

  47.   fran said

    Well, I still can't make or receive calls ... the only thing, because everything else works. i have iphone 3g 8gb

  48.   YO said

    Hello! I have a problem, when I click on Blachran1n, iTunes tells me that there is a problem and that I have to restore it, how can I fix it ???
    Thank you

  49.   Henry said

    From what you tell me, I think you must have a new iPhone… .. the new iPhone 3GS, perhaps last month, come with a new Boot that does not allow the stability of the jailbreak neither with Deavteam nor with Blackr1n, the same thing happens to me and what I did… personally I don't know if there is another way…. is that in my imac I installed windows with Bootcamp and ran the Blackra1n in Windows and every time I need to restart the iphone I have to connect them to Windows and run the Blackra1n and in this way I do not lose anything, only if I do not connect it it stays in restoration mode that connects it ………… anything in which I can collaborate with pleasure….

  50.   YO said

    Thanks, but it's not new, I've had it for almost a year now !!
    I have to do it connected to the pc, but not to iTunes ???
    Thank you very much

  51.   YO said

    I already have it, you have to do it with iTunes disconnected! for those who need to know !!
    Very good photo of the creator !!
    Thank you!

  52.   Henry said

    Ok then it has to work for you ... what I recommend is that you should restore your iPhone with the latest firmware version on iTunes and also update iTunes, also as I told you I don't work on Mac, I had to do it on Windows ... and I know that It works perfectly I did it yesterday… ..

  53.   Jose said

    Hello everybody. I believe that I follow the steps correctly to install the cydia on my 32 Gb Ipod Touch and updated to 3,1,2 using the blackra1n, and when I see the photo of the creator, from geohot, then I get the ipod screen on dark, with the iTunes icon and an icon of a USB cable and so I leave it a long time and it does nothing to me. instead, itunes tells me that I have the ipod in RFU mode (or something similar) and that to use it I have to recover it. As time passes and does nothing, in the end I spike in recovery. But I don't see the blackra1n on the ipod anywhere. I'm sorry for the tostón that I put in you, but if someone can help me, I appreciate it.
    thank you very much

  54.   JMP said

    I would like to know if there is a tutorial to make a restoration of iPhone 3g, 3gs after making a blakcrain and leaving it with the values ​​that the factory gives you, in several forums I have seen that people have problems after releasing their iPhone, and in my case everything is going well but I would like to leave it as is from the factory so that I can cover the guarantee of a problem in the iphone that has nothing to do with the software. A button is stuck.
    All the best

  55.   Josep said

    I have a new iPhone 3GS, with firmware 3.1.2, the baseband dodgy and from what it seems with the new bootloader, which makes the jailbreak "tethered", that is, every time I restart or restart the iPhone I have to return to «make it rain», that is, to pass the Blackra1n ...

    Does anyone know a solution to this problem? Or is it known if Geohot is planning a possible solution?

  56.   Henry said

    JMP if what you want is to leave it as factory is simple, you go to preferences settings and down to reset .. you click on delete content and settings ... ready there it asks you to connect it to iTunes and leaves it updated and as newly delivered by them .... and nothing happens I take one by guarantee like that and they changed it to me they did not tell me anything….

  57.   badass said

    Magnificent entry Mundi, thanks to you I have already managed to free my 3gs and two Touchs from different generations, following these steps is tremendously simple. Thanks again.

    I take this opportunity to ask something else that has nothing to do with the jailbreak: I installed the trial version of iLocalis and despite uninstalling it from Cydia I can't remove the annoying messages that I pay or uninstall the app. Can anyone tell me how to get rid of this heaviness ?, sorry for the OT ...

  58.   Spartan said

    Hello, you forgot to comment that before doing all this process you have to remove the sim because it burns it and then it does not work.Thank you.

  59.   Coco said

    That is what I wanted to know …… .I asked about 30 comments ago… and nobody told me if I had to remove the SIM or not… or put it later… .Thank you very much ESPARTANO.!

  60.   Spartan said

    a pleasure to help you coco
    By the way, do you know why when you turn off the phone and turn it on again or after downloading an application that needs to be restarted, the iphone is left with the apple and you have to restore the phone again and do everything again? please help. Thank you.

  61.   Juan said

    Is it necessary to keep saving the IBEC, IBSS and ECID for those of us who have the iphone 3gs with 3.0?

  62.   Coco said

    Ahhh the… .and what is that ?? I can barely understand what this is about Jailk… and they come up with the IBEC… the IBSS and the ECID… what are they ??? sory for not understanding .. thank you!

  63.   Alex said

    Well, I wonder the same thing ... Searching the Internet you find somewhat old forums that explain ways to save these certificates (IBEC, IBSS, ECID), but in the most current they do not even name it ... Anyone know if it is necessary to continue making a copy of those records?
    Thank you!

  64.   Alex said

    In the end, just in case, I have done the extraction of IBEC and IBSS with a 3gs version 3.1.2. Thank you all

  65.   Coco said

    Che… and if they speak in Spanish. ??

  66.   Soak said

    Hi, I have a 3gs version 3.1.2 and after installing pushfix, I don't get any notifications, what can I do?
    I'm a little tired already

  67.   andres said

    Hi, I did all the jailbreak with the blackrain and everything works perfectly, I turn it off, go into recovery mode and I have to do the whole jailbreak process again…. is there any solution for that ??? Thank you

  68.   rupopula said

    Everything you comment is very good ... but I don't know if I am the only one who has experienced what I am telling you below:
    I have an iPhone 3G with firmware 04.26.08, I have the jailbreak made with version 3.0 and applications installed, including TERMINAL MOBILE, well, reading online that there are possible viruses for the iPhone and that it was best to change the password of «alpine» in the root, I did it and since then I can NOT connect the iPhone via USB to the PC, it does not recognize it, I do not know what to do, I have a section that tells me wi-fi IP address in which I get a numbering, but in Data IP Address I get N / A, I think it does not recognize anything. Has anyone happened to this? Can you help me? Many thanks for everything.

  69.   James Bond said

    cokegh wrote:

    on November 5th, 2009 3:49 am

    Thank you very much for the work, but I would add something else:

    - How to make (step by step) the backup of the entire iPhone so as not to lose legal apps, or “testing” apps, or “cydia” apps, or saved games, or program settings?
    - How to save all downloaded emails on the iphone?

    In short, how to leave the mobile exactly the same but updated?

    I say exactly the same. How can you make it look the same as before, exactly the same?

    I am restoring the backup and before it finishes I have the Ihpone again as it came out of the box, I have to do it all over again, restore it with the new firmware and jailbreak.

    I have also synchronized it with the contacts applications etc. and it has not installed most of the applications, nor the legally purchased ones.

  70.   James Bond said

    Today I have lost my phone. It restarted when I installed an application and until I returned home to pass the blackrain to it, I was left hanging.

    I look forward to the improvement of the blackrain quickly

    regards

  71.   George said

    Hello,

    I know the post has been around for some time, but today this problem happened to me and I can't fix it in any way.

    I have a 3GS with 3.1.2 and the new boot, which when turning off the iPhone loses the jailbreak and you have to put the blackra1n again ...

    Ok, in principle everything was correct, I have been with the JB for some time, and without problems (except turning off the iPhone, of course).
    But today I found the iPhone turned off (and I think it had battery ... but good). When I went to turn it on, to pass the blackra1n again, and it did not finish the process, it restarted again and again. I decided then to restore it from the factory with iTunes, but it won't let me either! It tells me that "iphone could not be restored" iphone. Error 9.

    I have tried with two pcs, with the latest version of itunes, with home + power ... and nothing. It always restarts in both blackra1n and restoring itunes.

    I appreciate any kind of help, please.

    Thank you very much.

  72.   JoseA said

    # the wormboy
    on November 5th, 2009 11:56 pm

    I have a little problem !!!
    The original AT&T iphone was 3 months old as a paperweight and when the famous Blackra3n came out on the 1rd (x right, thank you very much to the author)
    The problem is that no application starts, you give the icon it starts to load and the second it returns to the main menu, I repeat, no application works, I also deleted them and downloaded them again and even then no application is started !!!

    any ideas??????
    -----------------------
    This problem is not from Blackra1n, it is from the iPhone in general, since I do not have the application installed and it has happened to me. What I do is synchronize the iPhone and it returns to normal

  73.   Luis said

    Sorry I have an iPhone that installed version 3.1.2, when I get into blackra1n I only get cydia and rock ... I do so that it comes out in sn0w

  74.   Luis said

    The problem is that I could unlock the iPhone with the blackra1n but when I enter there to release it, it turns out that I cannot because I only get the option of cydia and rock !!! How do I install the sn0w ??? or how do I unlock the iphone? or what is done in these cases?

  75.   robertin said

    hello, when is the option to be able to jailbreak the iphone 3gs without having to plug it into the computer to be able to turn it on when it turns off ???????. thanks

  76.   steph said

    Please help me when I download the blackre1n on my iphone classic 2g
    it only appears to me to install cydia and rock .. and I do not get the show! I need to unlock it for other companies like Luis please help me! I'm a novice at this!

  77.   platini said

    hello I have and 3gs and how can I know that mine can be released

  78.   andres said

    thank you berlin !! I have the IBOT 359.3 iphone 3gs with the 3.1.3 and I want to unlock it to put any sim PLEASE HELP

  79.   ivan said

    Hello I'm seeing how to jailbreaking but a question if it appears on itunes that I update to 3.1.3 as I do to update to 3.1.2 because I understand that in 3.1.3 there is no release yet

  80.   al said

    hello:
    I just took an iphone 3gs that replaces the 3g that I already had, but walking through the settings I have activated a voice option (I don't know if voice control or another voice control) and I am not able to get out of there every action I do with the iphone comes out a voice indicating the icon in which you are saying to dial 2 times and I am not able to get out of there, can someone help me? nor restoring it many thanks

  81.   andres said

    hello berllin! but will I be able to unlock my iphone 3gs 3.1.3 IBOT 359.3 when something comes out ?? or has my iphone been useless? THANK YOU..

  82.   pedro said

    Please I need help urgently !!!
    I just released it and made the jailbreak, and everything had been installed perfectly until suddenly I download a program called AnyRing in cydia and the mobile has restarted and does not turn on, the apple comes out and then the itunes image comes out and the usb cable to plug it in

  83.   pedro said

    iTunes recognizes it tells me to restore it, starts to download the update and tells me that there is an error because there has been a long time to wait for the download

  84.   andres said

    Hello!! does anyone know if there is already something to unlock iphone 3gs 3.1.3

  85.   pedro said

    I already managed to fix it. Now the only problem I have is that if I turn off the iPhone, I get caught on the screen and enxufar itunes and tgn q reinstall the blackrain program as to restart the iPhone. Does anyone know how to correct this failure?

  86.   andres said

    DOES ANYONE KNOW WHEN SOMETHING COMES OUT to unlock iphone ???? 3gs 3.1.3 IBOT 359.3

  87.   ruben said

    Hello

    I have an iPhone that my brother gave me and it was full of his photos and his contacts and I gave him in the options menu to restore iPhone and now it starts with the itune icon and the apple cable below. What would I have to do to be able to use it normally again? I hurry
    Thank you

  88.   Henry said

    Hello Ruben, what you did was reset it and the only way to get it out is to update it with itunes but I'm sorry to tell you that if you had something there, or the jailbreak done you lost it since now when restoring it with itunes it will necessarily take it to version 3.1.3 and this way you will not be able to have the jailbreak (at least for the moment).

  89.   pedro said

    Ruben, download the Blackra1n that appears on this same website, and when you get the icon of the cable and itunes you run that program and a guy will appear on the screen like with many iPhones, don't worry that in a few moments it restarts and you can use it .That's because your sister will have the phone released, I suppose

  90.   Henry said

    I do not believe Pedro since the problem is that Ruben gave him in the settings menu restore…. that is, I reset it, and the only way to remove it is through iTunes and updating it.

  91.   Aurora said

    I have an iPhone 3G and I am delighted with the features it offers me. But I have a problem and I would greatly appreciate anyone who can solve it: I do not download the pps that I receive in my hotmail !!!!.

    Thank you very much and greetings to everyone.

  92.   Carlos said

    I have a recently purchased iPhone 3GS with version 3.1.2.
    I have just used the f0recast-1.1 Program and the data obtained is the following:
    Serial: ###########
    Baseband: 05.11.07
    boot loader: 6.4
    Model: MC157

    jailbreak:yes
    Unlockable: yes- (use blacksn0w)
    Tethered: Maybe-depends if refurb

    My question is if I perform the Jailbreak I will have no problems or I will have it tied (pending the PC) when I turn it off.
    Thank you very much and greetings to all.

  93.   Rambert said

    Hi everyone…

    It is likely that this resolved but I have doubts. I have an Iphone 3Gs 16 Gb with firmware 3.0.1 and baseband 04.26.08.

    This without having done anything at all is to say neither jailbreak nor unlock ...
    It only has free apps from the store but I want to put 3.1.3 on it, then jailbreak it, install cydia and install things ...

    Now I have doubts .. I jailbreak it now, install cydia and save the ECID or create a firm 3.1.3 that does not update the baseband ???

    Whether I have to do the first or the second, how do I have to do it ??? Is there any manual that is clear ...

    Maybe you advise me to update to baseband 05.11.07 but I have read that it is better to stick with 04.26.08.

    In any way, I thank you for your help ...