Redsn0w 0.9.15b3: iOS 6.0.1 tethered jailbreak on A4 and earlier devices

The iPhone Dev-Team has launched an update from Redsn0w, version 0.9.15b3.

Like the previous ones, it is a jailbreak tethered, tied, you will have to restart your iPhone or iPod with the computer every time it shuts down or restarts, this is because it uses Limera1n, the exploit at the bootrom level that GeoHot discovered and that is impossible to close.

Works on iPhone 3GS, iPhone 4 and iPod Touch 4G; it does not work on iPhone 4S or iPhone 5.

It allows saving the SHSH of iOS 6.0.1 and solves the error 2601 in windows when restoring.

You can download it here:

More information - iOS 6 GM available in the Developer Center

Updated:

How to fix the error "missing keys.plist data for this build" 

Connect your iPhone and put it in DFU, while leaving Redsn0w closed

Right click on Redsn0w, Properties, Compatibility and select "Run as Administrator" and "Windows XP Service Pack 3 Compatibility Mode"

Open Redsn0w and select your device firmware 6.0 in Extras.

Go back, press jailbreak and install Cydia and carry out the process

Now you will be able to jailbreak without problems

Hit Extras, Just Boot and do a tethered reboot

(thanks to Herz for the help)


You are interested in:
How to record videos with the iPhone screen off and without jailbreak
Follow us on Google News

Leave a Comment

Your email address will not be published. Required fields are marked with *

*

*

  1. Responsible for the data: AB Internet Networks 2008 SL
  2. Purpose of the data: Control SPAM, comment management.
  3. Legitimation: Your consent
  4. Communication of the data: The data will not be communicated to third parties except by legal obligation.
  5. Data storage: Database hosted by Occentus Networks (EU)
  6. Rights: At any time you can limit, recover and delete your information.

  1.   fvad said

    gonzalo you need the software of ios 6.0 or the one of 6.0.1 esq with the one of 6.0.1 it tells me that it is not compatible

    1.    da said

      I have os 6.0.1 and it throws me when doing jaylebreak. Missing Keys.plist data for this build and if I try putting select IPSW it throws me FIRMWARE NOS SUPURTED et etc ... I try doing select with os 6.0 and the same. no sported .. if someone worked ???? please explain

      1.    Wardrobes said

        It works for me with 6.0 but when doing the justbost it doesn't let me do it. The jailbreak is done but I can't activate it. Why?:(

        1.    Adal.javierxx said

          Well then, the Jailbreak IS NOT DONE

  2.   idairaaleman said

    Hey, someone has managed to solve the instalous problem in ios 6. The problems it gives are;
    Instalous closes when an application is downloaded
    When you try to install an application it always gives ipa error.

    Thank you.

    1.    albertocantosjimenez said

      I turned off the mobile, I turned it on with resnow and everything works

      1.    idairaaleman said

        Well, I have restored a few times and installed cidya and the installous remains the same and I have ios 6.0.0

  3.   Fabio said

    not working, throw me Missing Keys.plist data for this build

    1.    da said

      exactly the same thing happens to me !! and if I go to select ipsw. He throws me that is not supurrted .. no way .. 

  4.   Olive42 said

    I use the GEVEY on my iphone 4 iOS 5.1.1… can it be updated to 6.0.1 without uploading the baseband?

    1.    eladanx1 said

      It is better to unlock the cell if the cell is from atyt, I will unlock it at 1000 pesos, you just have to give me the ime

    2.    Yonatan said

      Unlock iPhone at 1200 call 8097147323

  5.   Matipables said

    Is it possible to activate an iPhone 4 with this version of redsnow?

  6.   Paco said

    Is anything known about jailbreak (thethered or unthethered) for iphone 5?

    Thank you

    1.    Adal.javierxx said

       Yes…
      According to the Dev-Team, the tethered jailbreak for the iPhone 5 will be available from December 21 and will take 5 active days ... so, you know

  7.   LINKINBLACK  said

    it doesn't work, it doesn't support 6.0.1 yet, it shows me "Missing Keys.plist data for this build"
    and check on the dev-team page and nowhere does it say that it is for iOS 6.0.1 ... more careful with what they publish

    1.    da said

      I share with you! how funny this tuto spread everywhere. and it doesn't work ..

  8.   J. Ignacio Videla said

    If you want to do the tethered jailbreak, try select ipsw, and select an ipsw of 6.0.0

    1.    da said

      darling, i did that. also to test. I having os 6.0.1 I put select ipsw 6.0 and nothing. not supurted. Has this tutorial worked for anyone with OS 6.0.0?

  9.   djelx said

    Do not hscais case of this post because the version of Redsn0w 0.9.15.b3 was released before IOS6 came out and it is not compatible to jailbreak this IOS.6.0.1, it is a failure of GNLZ for not checking it before.

  10.   djelx said

    Do not hscais case of this post because the version of Redsn0w 0.9.15.b3 was released before IOS 6.0.1 was released and it is not compatible to jailbreak this IOS.6.0.1, it is a failure of GNLZ for not checking it before. Greetings

    1.    gnzl said

      If it works, select iOS 6.0 with iOS 6.0.1 installed

      What you like to criticize

      1.    Adal.javierxx said

        A Gnzl question, Based on the fact that this would work, can I do custom firm so that the bb of my iphone 4 does not upload and thus use my GEVEY. ???

        1.    gnzl said

          Si

          1.    Adal Javierxx said

            How do I do it?

          2.    Adal Javierxx said

            I still hope you tell me "how do I do it"?

        2.    jolupes said

          I am in the same case as you, have you tried it?

      2.    Miguel said

         Hello, could you explain how to make it work? Thank you.

      3.    da said

        dear it doesn't work! I do it all the way. I having os 6.0.1 I select os 6.0 and it throws not supported .. and it is redsnow 0.9.15b3… and they give it direct without putting select. it throws you error too.

        1.    More said

          I don't know what they download, but indeed you have to select 6.0 and that's it.

          1.    wero-chabelo19 said

            ok
            Thank you

        2.    wero-chabelo19 said

          I see the same thing that is not compatible with the version and it is the same version as yours so k pdo

      4.    djelx said

        Gnzl is not that I like to criticize but I have done it in all possible ways and when you give just boo the error Missing keys appears even when selecting iOS 6.0.
        Sorry, but it's not a criticism.

      5.    jolupes said

        with this system can you keep baseband to use gevey airplane mode etc? I have ios 4.2.1 with jail, GREETINGS

  11.   LINKINBLACK  said

    NOW THEY CHANGED THE REDSNOW VERSION TO 0.9.13DEV5, a developed jailbreak

  12.   LINKINBLACK  said

    noo it runs on selecting 6.0 does not work

  13.   Tech Gabriel said

    It tells me that it is not supported by redsnow anymore when I just boot

  14.   Maskley said

    Can I keep the baseband with redsnow?

  15.   Nathan said

    Impossible to jailbreak; write to me; "Missing keys", by putting "just boot".

    Still, thanks for the info! (Although it seems that this post is all over the network)

    : )

    and developers for so much work;).

  16.   Originalmty said

    I had the jailbreak with the ios 6 on my iphone 4 and I updated it to ios 6.01 and everything was fine until I got the announcement to activate the iphone via wifi in iTunes, I tried from the phone and from the computer and it can't, now i can't do anything with my iphone. What I can do? unfortunately it doesn't read me the sim card either

  17.   Cerial iQ said

    Well, for those who comment that it does not work for them, I am sorry to tell you that you are doing something wrong, because if it works, I now have jailbreal tethered on iphone 4 gsm with ios 6.0.1

    Salu2

    1.    cool said

      How strange, I tried many times and it became impossible, I had to go back to ios 5.1.1: S…. In redsn0w did you use ios 6 to jailbreak?

  18.   roberticox said

    I have 2 iPhones 4
    in one it worked perfect for me selecting the 6.0 
    and in the other I did NOT do the whole process right, I gave him install cydia and everything .. he does the whole process right, but cydia never installs!

  19.   fvad said

    gonzalo i need help i was on ios 5.1.1 and i installed an incompatible cydia tweet and the iphone no longer turned on i stayed on the apple i connected it to itunes and i restore it and i update to 6.0.1 without going through 6.0 and aora when I try to jailbreak with redsnow and it does not finish jailbreak it says wait please and there is no pass

  20.   Mike said

    Oh my, the same thing happened to me, I deleted a sidya file and the sidya icon was deleted and then I jailbreak again and my iphone crashed, I had no choice but to install the 6.0.0 version and it was like new but you can no longer install the normal jailbreak only the tethered but it does not work with the ios 6.0.1 is much more protected so that the hackers do not manage to invade, this until any time.

  21.   Mike said

    the only way is to hope that the hackers will get theirs very soon. eye do not update to ios 6.0.1 yet if you want the jailbreak

  22.   Talion said

    I had the same problem mentioned by some here. That is, running RedSn0w as administrator, selecting the 6.0 firmware and then doing the Jailbreak (on my iPod which had the 6.0.1 firmware without Jailbreak) I managed to finish, but then in the Just Boot it always failed (even selecting the 6.0 firmware) like this that I try to restart my iPod with the version of RedSn0w 0.9.15b2 (instead of the b3) and with that I can successfully Jailbreak my iPod. I do not know what the reason will be, but perhaps it will be useful for some.

    1.    montako said

      all the reason in the world. To me it has worked

    2.    davidacano said

      My God I love you haha ​​thank you very much 😀

    3.    Yamin perea said

      It also helped me, but cydia does not appear, and I say that it worked for me, because the cracked applications work now but visually there is no cydia, what can I do?

      1.    David Vaz Guijarro said

        Just Boot passes, and if it doesn't come out, jailbreak again, and then just boot.

  23.   sebas lopez said

    for when something for 4S

  24.   louis said

    It does not work, exploit failed !!!

  25.   fvad said

    I had the solution to me, it gave me the problems of xploit failed and then I did not install cydia and I already found the solution download the redsnow0.9.15b2 at 09.15.b3 and download it from the redsnow page and after that you go down and download the ios 6.0 software from the redsnow page and when you have everything you will be able to jailbreak without problems

    1.    Adal Javierxx said

      what blowjob is that? .. download b2 on b3 ??

  26.   roberticox said

    HERE IS SOLUTION TO THE PROBLEM THAT CYDIA IS NOT INSTALLED. !!!!!!!!!!!

    It does not install because when they uploaded to 6.0.1 in iTunes they gave it to update, and they had to give RESTORE! first back up clear! and then do the JB and then pass your backup again.! and ready!

    I hope it works for you!

    I have 2 iPhones in one it worked for me the first time because I did it with restore, and the other did not, and then I tried doing restore and it works for me in the 2 already .. apparently it is that doing update there are cydia files there that I do not know completely erase ..

    Anything I am to order .. GREETINGS!

    1.    David Vaz Guijarro said

      There is an easier one, without restoring.

      You do JB, cydia is not installed, you just boot, and it appears.

    2.    guayin said

      You don't know what happens if one goes up to 6.0.1 with Resdsn0w? because of the baseband, in my case I can't restore it with iTunes because it would upload the baseband, and 6.0.1 still can't be custom made .. Salu2

    3.    Marcos Puga said

      Hey, help me, I installed cydia but when I installed installous it went wrong and I had to restore it in ituns and now I want to install cydia and it won't let me.

    4.    battery said

      hello can you help me on my iphone 3gs please? this is my email 01kupal@gmail.com

  27.   PISCUIS said

    Well, I have done it a zillion thousand times following all your advice and there is no way. It jailbroken me but then I still get "Missing Keys.plist data for this build" when doing the restart.
    Let's see if the guys from the Dev-team give us some joy soon with the «untethered». Maybe as a Christmas present?

    1.    Destroyer said

       The only way it worked for me was like this:

      1. I run redsnow the 15b3
      2. I select the io ver 6.0
      3. I do the jaibreak with the redsnow the 15b3
      4 I close the redsnow
      5. disable antivirus
      6. I open the redsnow
      7. I select the io ver again. 6.0
      8. just boot
      clever

      It is important that when uploading to version 6.0.1 you do not give it an update, give it a restore (before you must download version 6.0.1) and give the location to itunes

      1.    merry mery said

        sorry, I have done everything to the end and when I just boot to restart it crashes in the apple .. what can I do? and I am not sure, then I have to restore? after what? thanks

    2.    marymery said

      you have to put the ios 6.0 back in and do just boot ...

  28.   Galicia said

    how do i run redsnow? I already downloaded it but only the files appear

  29.   Master Of Merol said

    Hi how are things. I have a little doubt: does this version allow me to re-install 5.1.1 on a 4S? Either I have not searched well, or I do not know how to read, but I have not found something about it 🙁

    Thank you!

    1.    Nathan said

      What I know is that you cannot downgrade to devices with A5, which are from iPhone 4s upwards.

  30.   Mark Yanez said

    I have an iphone4 and I have not been able to do the jb I have the 6.0.1 I have done everything and it does not pass the error missing keys for building help me please

    1.    Nathan said

      Have you already selected the iOS 6.0?

    2.    Goliath said

      Hi Marcos, here is my email to help you, goliath_h@hotmail.com You write to me and I will help you.

      1.    Chema Cardenas said

        Hello Goliath, I am in the same case. You help me?

  31.   Douglas Herrera Brenes said

    Like I do on a Mac

  32.   Villavic said

    Hi, how do I install firmware 6.0? It is already with version 6.0.1, but when I try to choose a firmware I can't find any ipsw file. I read out there that it rename the redsn0w_win_0.9.15b3.zip with .ipsw but it doesn't recognize the file as valid. I am stuck in the missing keys.plist step, it is an iphone4, A1332 (I understand it is 4 GSM).

    1.    David Vaz Guijarro said

      What a bigger nonsense you just said …… .. you have to download the IPSW from getios.com and on redsn0w, press extras, select ipsw and that ipsw, and then go back and jailbreak, enter DFU and voila… greetings!

      1.    Nathan morgan said

        hahaha +1 xD

      2.    samantha said

        Hello, I do not understand that about jailbreaky redsn0w I would like to know what are all the things that I should download (I download IOS6 and iOS6., the redsn0w b2 and b3_) but I do not want to select the file

  33.   Andy said

    I have a problem, I downloaded iOS 6 and 6.0.1 from a video I saw on youtube, but no ipsw file appears to select it and install it, you don't know what I can do?

    1.    David Vaz Guijarro said

      If no IPSW appears, what appears to you?

      1.    Andy said

        at the moment it asks me to select a file, nothing appears, only some folders but I open them and they are empty S:

  34.   pableeras said

    Hello, all you have to do is this. Download redsn0w_win_0.9.15b2. Once downloaded, right click on the icon> compatibility> windows xp service pack 3. We also mark the box to run as administrator mode.

    I REPEAT, ONLY works with VERSION 15B2. 

    1.    Alonso14 said

      thanks brother it worked for me with redsnow b2 thanks again

  35.   Jaen aragon said

    ALTHOUGH I RUN IT WITH XPSP3 COMPATIBILITY AND AS ADMINISTRATOR, ENTERING DFU MODE, I CONTINUE TO APPEAR missing keys.plist data for this build…. YE TESTED 0.9.15B1, B2, B3 ,,,,

    1.    David Vaz Guijarro said

      And on another PC have you tried?

    2.    guayin said

      Hand, that is not possible to do, it turns out that Apple went to version 6.0.1 without having signed I do not know what bullshit of ios 6.0 now that version can not be installed anymore, I downgraded from 6.0 to 5.1.1 and now I can not upload to 6.0.1 until there is jailbreak for that ios ...
      6.0 can no longer be installed, not even in iTunes

  36.   Carlos said

    I do not think the cydia I already jailbroken it like 6 times and the justboot and the cydia does not appear, it helps

  37.   Camara said

    WITH WHAT APPLICATION CAN I DOWNLOAD FREE WHATSAPP AND POU? I WANT A QUICK ANSWER I HAVE VERSION 6.0.1 ON IPHONE 4

    1.    Natth clover said

      By "reply" do you mean "reply"? Because this way no answer will be quick; and yes, you need cydia, then installous.

  38.   wero-chabelo19 said

    I see that my firmware is incompatible with the redsnow version and I get that problem that says missing keys or something like that and I want to be my jailbreak I have an ipod touch of 4 version 6.0.1 someone help me please

  39.   Monica ninel said

    I was downloading IOS 6.01 to my iPod and when I finished downloading it appeared that I had to connect it to iTunes, what do I do?

  40.   Edgardo said

    where do i download the ipsw

  41.   Marcos Puga said

    Hey, help me, I installed cydia but when installing installous it went wrong and I had to restore it in ituns and now I want to install cydia and it won't let me help: c is ios 6.0.1

  42.   MARTINJUJUY said

    Hello!! how are they?? My ipod turned off with the tethered jailbreak done .. I can't just boot. Try to do the jaibreak again and I get this:

    Certains operations (like the A5 jailbreak) are disabled due to incomplete iTunes libraries. Please be sure the latest iTunes is installed.

    couldn't load mobiledevice.dll (error 127)

    WHAT I CAN DO?????

    1.    elrubio03 said

      Install iTunes and restart the pc, the redsnow has to be in a folder just because if it is with something else, it gives you an error.

  43.   Ruben said

    I have an iPhone 4 ios 6.0.1 when I try to do the JB with Redsn0w with IPSW 6.0 it tells me exploit failed. If I do it with Sn0wbreeze it installs cydia but it does not start either the mail or safari. What I can do??

  44.   battery said

    there is no * Windows XP Service Pack *

  45.   teTee_7 said

    Hello everyone, I have been trying to jailbreak an iPhone 4 with iOS 6.0.1 (10A523) for two days, I follow all the steps of loading the IPSW iOS 6.0 in redsnOw, I do the jailbreak, the pineapple appears and it enters the system but cydia does not appear, To make it appear I go back to redsnOw and reload the IPSW iOs 6.0, I give the Just Boot and put the mobile back in DFU. All this perfect, but when the Just Boot finishes loading on the Mac or PC (I have done it on both), the jailbreak pineapple appears and then the apple and the apple remains blocked without being able to do anything with the iPhone.

    Could someone give me a hand ?? I'm sick of always doing the same thing and not getting results.

    If someone wants to contact me, my email is tetegsxr@gmail.com

    Thanks and greetings to all

  46.   rodrigolema said

    Hello, I have MAC, therefore I do not have the option to run as Administrator. Does anyone know how to solve it? Thank you.

  47.   Patluka said

    Hello I have an iphone 3g that got me error 1015 when updating it from iTunes, I pae the redsnow (recovery fix) to recover the itunes error and it turns on but all the time it tells me a message No SIM card installed insert a valid sim with no pin lock to active iphone and it only lets me make the emergency call, it won't even let me go in to see that it was installed. Please help

  48.   daniel alejandro landazury who said

    Many thanks to the people who discovered that the ipod touch 4G worked with redsn0w b2 and b3 ios 6.0 is the solution to be able to install cydia in ios 6.0.1 and I was able to jailbreak it. solution are the maximum if I can help you ask

  49.   Ing Grmn Snchz Mnslv said

    hello I do all the steps with ios 6.0.1 but redsnow I get an error I only receive ios 6.0 and with that I do the jailbreak then in extras just boot but I don't know what is the reboot tethered?

  50.   Fernando Garcia said

    Well I have an iPhone 3G and the problem I have is that I was updating it and I accidentally disconnected it when it was not finished yet

    well, the fact is that I stayed in the logo connect to itunes and I don't know what to do, what do you recommend?

    1.    Jason said

      download the tyniumbrella, there it gives you the option to exit recovery mode and that's it

  51.   danielv said

    Hello, good afternoon guys, I did the jailbreak with redsn0w 0.9.15b3 ios 6.0.1 went well, I installed cydia and everything worked very well, the problem arose when I turned off the iphone 3gs to test the tethered boot I tried to turn it on normally and turned on but Cydia or safari or mail no longer worked, I put it in dfu mode to turn it on with redsn0w and I get an error "exploit failed", if it turns on normally but without these applications help to solve it please!

  52.   Manuel said

    Hello, excuse me, but that error keeps appearing: / I don't know what I'm doing wrong or what I'm wrong, could you help me?

  53.   mbobe0 said

    ok look, I just did the jailbreak right now and the same thing happened to me and it gave me an error, what I said was that I turned off the antivirus and there is this end, I think that the antivirus if it is good, it deletes a part of the redsnow but some doubt look on youtube for marcianophone good tutorials from monday to thursday and everything new.good day

  54.   chipu said

    Thank you! however I still need help (whoever is kind) I already have the jailbreak, but the sim still does not recognize me.

  55.   isa said

    Hello good Morning!!!
    I'm new to this… when I installed the cydia, my iphone turned off and I can't turn it on or anything…. What I can do????

  56.   santy said

    Please help me with the redsnow b3 does not recognize any ios6 or the ios5 please I need help pass me a link with the redsnow that works with the ios6 or with the ios 5

  57.   santy said

    In what version should my iphon 4s be to do the jb I can put a previous one because now I have 6.1.2

  58.   Ed gardner said

    Very good to everyone!! MY name is Eduard.

    I have a problem that I can't get out of, I need helpaaaa and I can't find any information online.

    Turns out I jaibreaked my iphone 4 GSM with rednsow 0.9.15b3 x to ios 6.0.1.

    I want to restore it to iOS 6.1.2 so that later I can jailbreak with evasion.

    I go to iTunes and press "restore" holding down the "alt" button to use ios6.1.2 and not ios6.1.3 which is what Apple recommends, but there is no jailbreak. When you finish extracting the software, this message appears:

    "The iphone" iPhone "could not be restored. This device is not compatible with the requested version »

    I have tried with other iOS and it tells me the same thing. I have not tried 6.1.3 yet so as not to lose the jailbreak. I have also tried from redsnow but it also gives me failures.

    Thank you all in advance, I don't know what to do anymore!

    Saludossss

  59.   Perico Perez said

    Hi guys, I have an iPhone 4, which was brought to me from Canada, I don't know what company it was activated with, but it has IOS 4.2.1 (8C148) and baseband 03.10.01. Should I update it with IOS 5.0 or 6.0 and then try to unlock it or is it better to leave it as is? If yes where do I download the IOS, on the Apple site there is no way. On the other hand, I tried to load cydia 3.0 and it tells me that I must have IOS 5.0, and the greenposison program left me stuck, I know there are many questions but I need help, at least with the first ones ... THANK YOU

  60.   Sergio said

    The ipsw 6.0 does not catch me, please help me

  61.   Jose Salvador Moreno Romero said

    What happens if I delete the redsn0w Jailbreak icon? I will no longer be able to install apps without a signature and will cydia be deleted? or is it just an unimportant icon?

  62.   Jose Salvador Moreno Romero said

    What happens if I delete the redsn0w Jailbreak icon? I will no longer be able to install apps without a signature and will cydia be deleted? or is it just an unimportant icon?

  63.   Alexander Cuevas said

    where it is downloaded

  64.   Alexander Cuevas said

    como lo descarado

  65.   nava angel said

    now how do i remove the jailbreak it won't let me restore it

  66.   MARC said

    HOW DO I DO THE BACKUP

  67.   MARC said

    PLEASE SOMEONE HELP ME SINCE I HAVE TAKEN DAYS TRYING TO JAILBREK MY IPHONE 3GS AND NO MORE IT IS NO LONGER LEFT DOWNLOAD THE IOS 6.1.1 AND DO NOT LEAVE AND DOWNLOAD SEVERAL IOS TO TRY AND NO MORE NO PLEASE HELP. THANK YOU