Tutorial: how to jailbreak untethered to iOS 4.3.1 using Redsn0w

With this tutorial you will be able to jailbreak untethered to iOS 4.3.1 from Windows and from Mac.

Works on iPhone 4, iPhone 3GS, iPod touch 4G, iPod touch 3G, iPad 1, and Apple TV 2. Not compatible with iPad 2.

YOU NEED:

Firmware 4.3.1

RedSn0w

Windows

Mac

TUTORIAL:

Restore your iPhone from iTunes

(NOTE: if you don't want to upload the baseband to release it later use this tutorial to update.)

NOTE 2: if you have BB 6.15.00 you cannot restore, you will have to use PwnageTool.


Open Redsn0w

if you use Windows run it as administrator and in compatibility mode with Windows XP SP2

Press browse:

Select the firmware 4.3.1 that you have downloaded

Press next

If you have a 3GS you will get a warning like this:

Select Yes if you have a 3GS with a new bootrom and no if it is an old bootrom

Select install Cydia

Connect your iPhone, turn it off and follow the steps:

Press Power for two seconds

Without releasing Power, also press Home for 10 seconds

Without releasing Home, release Power and keep pressing Home for another 15 seconds


Your iPhone will restart

It will take a little longer than normal.

Once restarted you already have Cydia on your Springboard.

via |iClarified


Follow us on Google News

298 comments, leave yours

Leave a Comment

Your email address will not be published. Required fields are marked with *

*

*

  1. Responsible for the data: AB Internet Networks 2008 SL
  2. Purpose of the data: Control SPAM, comment management.
  3. Legitimation: Your consent
  4. Communication of the data: The data will not be communicated to third parties except by legal obligation.
  5. Data storage: Database hosted by Occentus Networks (EU)
  6. Rights: At any time you can limit, recover and delete your information.

  1.   sora said

    I already tried it and it works very well on my ipodtouch 3g

  2.   in. said

    Sorry for the obvious question, but ... when restoring the iPhone from iTunes, obviously the apps and device settings are lost, right?
    In this case, is there a way to make a complete bkup (app and personal settings) to dump it once the firmware update is done?
    In this procedure they describe, is NOT the Baseband update contemplated? In order not to upload the baseband, you have to do all this proceeding but with the tiny umbrella running?

    I thank you in advance for some light on the subject and I appreciate the work you do with your reports and tutorials.

  3.   gnzl said

    When restoring iTunes you keep everything (everything that is logically legal)

  4.   alex said

    Why do you have to restore? If you already have the iphone with 4.3.1 and download the ios, you could go directly to the redsnow step, right?

  5.   gnzl said

    Evidently.

  6.   Alex said

    It would not hurt to put a (if you already have 4.3.1 you do not need to restore) in the tutorial: P

    Thanks gznl

  7.   Ricky said

    It works out of vice !! machines !!!

  8.   in. said

    Thanks for the reply.
    It is not clear to me what is legal and what is not ...
    everything installed from cydia is illegal? everything installed with installous is illegal too?
    I still do not update to 4.3 or 4.3.1 obviously, I continue with 4.2.1 and from what I read I would like to keep the baseband to release in the future if I need it (03.10.01) therefore I have to update with tiny umbrella first with version 4.3.1 downloaded from the link provided here? Or with version 4.3.1 downloaded from iTunes? ..

  9.   gnzl said

    what you download from the app store is the only thing that will remain, the rest will have to be reinstalled.
    Installous is not only illegal but it is a crime, so please do not talk about it here.
    If you do not want to update baseband, you will have to follow the tutorial that appears in the first steps to not update baseband.

  10.   rafael said

    I did it but remember that the incompatibility of several programs follows an example: celeste bluetooth, iprotec, yourtube 2. at least they are the ones that do not work for me.
    If you have the jailbreak with 4.2.1 it is very stable, do it if you are like me and do not have the 4.2.1 signature.
    regards

  11.   juliusperez said

    Aorita I find em in a city and I already want to restore for this ai some way to take a backup of music and pass to this pc so as not to lose everything?

  12.   in. said

    Thanks for your answer again and sorry if I pronounce something inappropriate, I get the point.

    I have one more question if it is not a bother, if I update to the new firmware including the baseband, what advantages do I get? Coincidentally, one of the things that I noticed on my iphone is that if I open the compass app or use the maps app, they place me at the opposite end of my location ... I suspect that this failure has to do with the baseband .. maybe this wrong .. but it is a big question, so I ask if it is worth updating to the new baseband. (obviously I know that I would lose the possibility of release by doing so)

    Thanks again 🙂

  13.   rafael said

    Yes for the backup of messages, contacts, photos and video.
    you right-click the device in iTunes and click on "Save backup"
    and for music and videos use the ipod acces for windows.
    and ready after you do that and do all the restoration plus jailbreak.
    You give him restore backup and the music and movies are synchronized and the chicken is ready….
    regards

  14.   gnzl said

    JULIO PEREZ: You better wait
    POL: has nothing to do with it, the baseband keeps it if you want to release, that's the advantage

  15.   diego said

    I have already done it and cydia does not appear, what should I do?

  16.   JFOP said

    Those of us who once went up, with 4.2.1, to baseband 6.15 and restored, will continue with this same version, with the lack of GPS, right? Thanks

  17.   diego said

    I did it again and cydia appeared

  18.   gnzl said

    JFOP: if you have 6.15 you cannot restore except with a custom firmware, use pwnage tool

  19.   potamus said

    when for the ipad 2?

    🙁

  20.   Alfonso said

    If after updating to 4.3.1 I say no to restoring the backup, I will be able to do it later or if I say no, it puts it as a new phone and therefore it will no longer be possible to restore said copy ?
    .
    This Redsn0w actually what it does is patch the firm? It is that but I do not understand why it is necessary to download it and select it. Is this a safe method? It is that I do not know, the GreenPoison gave me much more confidence that this, I do not know, I insist, really this method is as safe and let's say "good" as it could be in GreenPoison?
    .
    Finally right now I have 4.2.1 and I'm doing great, is it worth updating to this 4.3.1? I mean the news like the Safari much faster (as I understand it), among others, are they worth it? Is the battery problem that version 4.3 had already solved? Or am I waiting for a firm with more news? It is that it gives me that these firm's more than something else what they do is close holes in the jail without providing many new features, am I right or do I update?

  21.   loop said

    Hello, I have restored the iphone, it had version 4.2.1 and the good baseband 1.59, I have restored following the steps of the following link
    https://www.actualidadiphone.com/2011/04/03/tutorial-actualiza-tu-iphone-4-a-ios-4-3-1-sin-subir-la-baseband/comment-page-1/#comment-188473
    All perfect without uploading baseband, now I have passed the redsn0w on mac and I already have cydia, so for the moment all perfect thanks guys

  22.   JFOP said

    Gnzl: Keeping the baseband, so I would stay the same as I am, right?

  23.   gnzl said

    ALFONSO: This method has existed for 3 years, Greenpois0n for 3 months ...
    .
    Whether it is worth it or not is up to each of us. The battery is fixed.
    I'll update, if it helps.

  24.   marcodeoz said

    someone knows how to activate multi-touch gestures

  25.   gnzl said

    JFOP: yes.

  26.   gnzl said

    MARCODEHOZ: From mac with XCODE, from windows you have a tutorial in Actualidad iPad

  27.   diego28cs said

    The cydia icon appears in white and when I open the cydia it appears preparing the system…. it closes and restarts when it turns on again it appears the same as I should do?

  28.   zerocoolspain said

    I have 4.2.1, what is better? Restore 4.3.1 from 0 or iTunes update me to version 4.3.1?

  29.   juliusperez said

    Hello, excuse me, gnzl, I have a legal copy of celeste, the software for bluetooth transmission, does it work in version 4.3.1?

  30.   gnzl said

    DIEGO: do it all over again
    .
    ZEROCOOLSPAIN: always in this order: Restore (do not update), jailbreak, put backup.

  31.   Alfonso said

    Heh, heh, heh, Gonzalo will help me. By the way, you don't tell me anything about the first part of the post, about the backup ...
    .
    By the way, that I have seen from the GPS a few posts back is only for the 3G or 3GS, right? Come on, the 4th is free of those problems right?

  32.   gnzl said

    JULIOPEREZ: Not yet, but he will

  33.   gnzl said

    ALFONSO: no, you have to do it the first time, but if you close iTunes without answering it, it lets you do it later, see the answer to zerocoolspain
    .
    The GPS thing is if you install the BB 6.15, in 3G or 3GS

  34.   marcodeoz said

    Gnzl friend, give me a hand, pass me the link, please look now, but I can't see it because my eyes hurt 3:00 am Mexico City time.

  35.   gnzl said

    I'M GOING TO THE CURRO, PEOPLE, ANIMO.

  36.   juliusperez said

    gnzl sorry if I am very asked my last question is it possible to activate the hostspot function or the multitouch function? is that the hostpost my company restricts it

  37.   elmarcos said

    Ready and smooth, jailbreak iPhone 4 4.3.1 and already activate multi-touch gestures =)

  38.   manuel said

    i downloaded the 4.3.1 firmware but there are no ipsw files to look for help please

  39.   juliusperez said

    Can someone tell me how to activate multi-touch gestures and activate hostpost if it is disabled?

  40.   zerocoolspain said

    Thanks Gnzl 😀

  41.   arturo said

    hooola thanks I tried it and it worked I had a question because I have an iphone 3gs with the baseband 05.16.02 and I thought that I could no longer unlock it but it seems that if now I use redsnow and install cydia and change the baseband to the ipad 6.15 .00 and I think I can unlock it, right?

  42.   srlobo said

    Gnzl, why do we have to restore? It cannot be done as in other versions that we updated the iOs and then we passed the redsn0w ??

  43.   manuel said

    Please help when I open redsnow and press browse I can search as I want in the downloaded firmware 4.3.1 file that I can't find any IPSW

  44.   felosantay said

    @Alfonso I think that on this website there is enough information, for your doubts but it is not to be rude or anything but use the search engine @gnzl and several editors an I emphasize the news of 4.3.1 so, I am one just like you very I am careful to tell you that at 2 years old I dare I dared to do a jb about three years ago that I have been using iOS since then I only had ipod and I did not see much contribution from jb until I decided on an iphone and that was when I used jb. Now I think differently, it is better to always update, open a way to circumvent apple's security, so more and more jb will come.

    @gnzl Thank you for your tutelage, you are a boss, I have a friend here, it is merely 3:46 am on Monday, well I'm used to it because I work at night and here, following tute, I already have the jb sent to the iPhone, I hope it arrives soon for the iPad 2 because tomorrow I get mine by mail so I ordered it on the very day, that is, on March 11. Oh by the way I live in the USA

  45.   LIVING ROOM said

    Good morning:
    I have gotten up with this great news and many doubts, to see if someone can help me. I have an iPhone 3GS with iOS 4.3 and FM 5.16.01. Can I do the JB with this method ?? The mobile is free and I do not need to release.
    1000 Thank you.

  46.   mr wolf said

    Is there a problem with the GPS? Someone has tried?

  47.   JJAVI said

    Hello everyone! Hi Gonzalo!

    Easy question for you ... how can I know if my bootrom is old? I have a 3gs ...

    Thank you!

  48.   juliusperez said

    @JJAVI re recommend this software iDetector tells you everything about your bootrom greetings I hope it helps you

  49.   JJAVI said

    @julioperez thank you very much for the answer! I will try it 🙂

  50.   Limelight said

    Good Morning! I have a question ... if I have my iphone 4 version 4.2.1 with the greenp0sion jailbreak ... what should I do to go to 4.3.1 exactly ???? No matter how much I read and read… this question arises. I understand that non-legal applications are lost, but having the appsync… they would not be put back ???

    A greeting and thanks a lot!

  51.   Aitor said

    Hey.
    I have a Movistar iPhone 3GS, 4.1, baseband 05.14.02 and Jailbreak.
    I want to update to 4.3.1 but I am not sure whether or not I should upload the baseband.
    I am not interested in releasing, apart from the fact that I no longer have permanence and they should do it to me.

    I also have an ipad 1 with 3G, software 3.2.2, baseband 06.15.00 and Jailbreak.
    In this one if I have to go up to 4.3.1 even if only for multitasking.
    For my ipad and that baseband do I have to use Pwange or can I do it with RedsnOw?

    I use Mac.
    What is more advisable to do it with RedsnOw or with Pwange ???

    Thanks for the reply.

  52.   ideafixx said

    Is there no way to make a backup of the installed programs from cydia?
    It is that I have it quite tuned and it would be a beating to put it like that again. Not to mention the number of apps that you would have to search again.

    A greeting.

  53.   Zells said

    when you jailbreak it with Redsn0w it restarts
    and the logo that appears on the hard disk with the green arrow downloadind jailbreak data.
    How long does this process take ??? I have been a long time.

  54.   raulixw said

    Ale exo el Jail 4.3.1, everything perfect 🙂

    Greetings and thanks Actualudad Iphone and Dev-Team

  55.   raulixw said

    Ale exo el Jail 4.3.1, everything perfect 🙂

    Greetings and thanks ActualIdad phone and Dev-Team

  56.   RAID said

    Some Clarifications for Questions:
    RedSn0w requires to have the iPhone running with iOS 4.3.1, an update of the operating system made from iTunes that updates the baseband of the Apple smartphone. And also, if you are one of those who has been preserving a releasable baseband, you should know that ultrasn0w is not compatible with iOS 4.3.1. So upgrade to 4.3.1 and restore default.
    To preserve Cydia applications and repositories, Use AptBackup or PkgBackup.
    To keep Installous applications have AppSync 4.X and sync with itunes.
    Greetings,

  57.   red said

    good

    i have iphone 4 with ios 4.1 and jailbrak. I have already downloaded both the firm and the application. Trying to restore the downloaded firmware gives me error 3194. Can I update directly from iTunes or should I restore with the downloaded version? No matter how much I search, I cannot find an answer in the forum, if I can update by the normal method and then do jail

    graicas

  58.   David said

    Hello kolegas I have a question with this method if my iPhone turns off I need a comment to the computer to start it or it is not necessary and thank you all for making all these things possible.

  59.   Joan said

    Hello, I have updated, and when I try to load with redsn0w_win_0.9.6rc9, it hangs, does anyone know what happens ??? Thank you.

  60.   Traor said

    Does the "Downloading Jailbreak Data ..." process take a long time?

  61.   Nacho csas said

    Applause for gnzl…. Clap clap clap clap clap clap !!!!!!!!!!!

  62.   Pablo said

    It weighs 666 MB how scary !!!!!!

  63.   adrian said

    Hello to me, the installous with the appsync, when I connect it to the iTunes, I delete the applications from the iTunes itself, I have "itunes sync" selected in Installous options but nothing at all

    All the best

  64.   Alberto said

    Good Morning! I have a 3gs with firmware 4.2.1, jailbreak with greenpois0n and baseband 05.15.04. I am hesitating to update to 4.3.1 since I will upload the baseband to 05.16.02 and the problem is that I am waiting for the release! I am aware that currently 05.15.04 and 05.16.02 are not releasable, but can it be that when a tool for the liberation appears it only works with 05.15.04 and not with 05.16.02? Or when the Ultrasn0w-type tool comes out, will it be released to work with the newer baseband? Is there any chance that I can currently release it?
    Thank you very much to iphone news for keeping us informed of all the iphone news!

  65.   muscles said

    RAID
    The ultrasn0w is going to be updated to make it compatible with 4.3.1, so for those who have preserved a releasable baseband do not update updating baseband
    Adrian
    so that you do not delete the applications you have to right click on the menu on the left where your iphone appears and give TRANSFER PURCHASES, but of course you delete them, you are synchronizing with the app that you have in the iTunes library

  66.   SKATEBOARD said

    Hello everyone! If I have the ipad in 4.3.1 tethered (with snowbreeze) what steps should I follow to leave it untethered without having to restore and lose everything?

    Thank you!

  67.   Javier said

    Hello, one thing that is not clear to me, I normally update to 4.3.1 from iTunes and then do the Redsn0w?
    It is not clear to me what to restore.
    regards

  68.   Rodri said

    Something strange has happened on my device, I updated from iTunes, and everything remained as is. with cydia installed and with all my old applications on my phone. But with ios 4.3.1 !!!!!!! Why can it be ????

  69.   scraf23 said

    Thank you, but there is no greater appreciation than making a donation to the dev-team, and I did, as always.

  70.   Joan said

    To the colleagues who are left in downloading jailbreak data ... have you completed? It stays there for me ... and has it been around for a long time? Please comment if you have completed it or not

  71.   lol said

    @RAID or someone to help me
    I have the pkgbackup with the backuo done, what I don't understand is how I will use it when updating the ios ... won't this app be deleted like the rest of the cydia apps? How would you use it then?

  72.   muscles said

    Rodri
    Even if you see all the applications and including Cydia, try opening them 🙂

  73.   muscles said

    lol
    When making the backup, pkgbackup synchronizes with itunes ... when you do jail and others reinstall the pkgbackup and when you synchronize with itunes, it will enter the configuration that was registered when making the backup with pkgbackup

    CORRECT ME IF I AM NOT WRONG PLEASE

    Then you go to pkgbackup, restore and when you get into cidya you install everything, (or something like that) please correct me that I did this a long time ago

  74.   lol said

    @kaski Thank you very much for the answer and help! I will be attentive in case someone thinks that it is not like that but it looks like it is ... thank you again 🙂

  75.   sleusson said

    Ready, I already have my Iphone 4 with JailBreak !!!!!

  76.   Francisco said

    Quick, easy and comfortable… for the whole family!

    Regards!

  77.   Nacho said

    One question, is it the first time that I jailbreak, I have iPhone 4 with 4.3.1, when I jailbreak I lose the programs that I already had installed? How do I get them back, greetingsssss

  78.   srlobo said

    @Nacho you don't lose anything, make a backup and after doing JB restore it

  79.   LIVING ROOM said

    But I do not understand that someone help me ... I update from itunes or I download the iOS and use redsnow directly is that I have never used XD.

  80.   Farts said

    Hello, I have a problem

    I have the iphone 4 with ios 4.3 (not 4.3.1) it performs the whole process well. But the Cydia icon comes out blank.

    Thanks in advance.

  81.   DADOGON said

    Hello everyone. Solution to many doubts.
    If you install ios 4.3.1 you should not lose the data of the previous version or the current one you have.
    For everything to work correctly, and without errors, the ideal would be to restore the iPhone to the factory with the version of ios4.3.1 previously by making a backup copy with iTunes. (Those of you who have the jauilbreak of a previous version, the normal thing is until you do the jailbreak to version 4.3.1 you cannot use the games and applications of cydia or «piratillas» ok) so don't worry, and once I do jailbrea to 4.3.1, you reinstall all those games and programs again.

  82.   jake said

    Hello everyone, do you know if there are appsync or another similar for 4.3.1? I don't see it ...: S

  83.   luchiter said

    Hello, I have installed the ios 4.3.1 from before and now it is necessary to download the same firmware or do I install it only? regards

  84.   I pe said

    Help!!! I have a blank cydia icon and there is no way to correct it. When I try to open the application it closes by itself. I have an iphone 3gs (New Bootroom) and BB 05.16.02

  85.   fabio said

    Thank you friends, I have done it and I am a bomb …… it is going very well… ..we hope for the release now….

  86.   I pe said

    Fixed cydia blank error:
    I have restored the Iphone and then I have applied redsnow. Finally I have installed the last backup I had in iTunes to leave it with the apps I had (but with JB 4.3.1)

  87.   Iñaki said

    Redsn0w gives me an error. It tells me that redsn0w stopped working. Because it can be?
    I open it as an administrator and all that.

  88.   English55 said

    The same thing happens to me as Iñaki in his previous post, what could it be? I use sight

  89.   Limelight said

    URGENT… it is normal that when restoring itunes also download 4.3.1 ???????? Thanks, I need this answer to make way for the jailbreak !!

  90.   kyokuruben said

    Ribalta, if you restore the iPhone it will automatically update to the latest version. It is normal.

  91.   Limelight said

    thanks KYOKURUBEN, but is this restore step necessary for the jailbreak? or do I go directly to redsnow and do the steps ??? thanks crack

  92.   jajereal_86 said

    hello everyone, when the redsnow process starts I GET HANGED, right after putting it in dfu and starting to install jailbreak. I've tried it like 15 or 20 times and I can't find a solution. Please someone who had the same problem and has solved it… ..I'm desperate now… .Help please !!

  93.   Yesterday said

    Hi, I would like someone to tell me how to jail an apple tv2. Thank you.
    P.S. I love your website.

  94.   Iñaki said

    Redsn0w gives me an error. It tells me that redsn0w stopped working. Because it can be?
    I open it as an administrator and all that. And I use windows vista. Please help.

  95.   kyokuruben said

    Ribalta, download the firmware by clicking on the link in the tutorial, if you follow ALL the steps it will work for you (it does not matter if you already have the iPhone updated to 4.3.1., Download it anyway and attach it when asked).

  96.   pac01 said

    Hi jajereal_86, do the whole process with Itunes open, remember to turn off the iPhone before putting it in DFU mode, if you use Windows, in properties put it in xp SP2 compatibility mode and run as administrator it happened to me until I left itunes open
    A greeting

  97.   kyokuruben said

    jajereal_86, if you follow all the steps it should work for you. Have you downloaded the firmware that is in the tutorial? it is very important that you have it. If it does not come out, restore the iphone and try to do it again.

  98.   Juan said

    that error when you get iñaki?

  99.   Alex said

    Hello, everything ok to me, the only thing that does not appear to me anywhere is the option of thetering the iphone with version 4.3.1, does anyone know why?

  100.   English55 said

    thank you all, the failure was not having the iTunes open

  101.   Iñaki said

    when the hard drive drawing on the iphone from downloading jailbreak comes out.

  102.   nitrous said

    Hello good, I am new to this and I have several questions, I have an iPhone 4 with ios 4.3.1
    1) do I have to leave itunes open when doing redsnow?
    2) connect the iphone to the pc on and then turn off or connect directly off ?.
    3) When the whole process is complete, will I have the applications that I had or do I have to recover them from the backup? if so, how?
    thank you very much

  103.   jajereal_86 said

    thanks to all, I will try it with itunes open and adding the compatibility if not… well I will restore…

    Greetings and thanks for the help

  104.   Juan said

    Has someone given you any problem doing it with win 7?

  105.   Sergio said

    Done without problems peeeeeero ..

    1st I do not see any advantage of 4.3.1 against 4.2.1 I do not even notice the issue of safari going faster.
    2nd Now it won't let me install anything with installous. It tells me that the .ipa file is invalid.
    3rd I have taken away, I don't know why, 2 Gb or so of main memory with the same applications.
    4th It gives me the feeling that it is slower on iPhone in general. When entering the applications and when moving through the menus.

    I think I'm going to look at the possibility of going back to my 4.2.1 with the greenpoison that I was doing great.

    A greeting.

  106.   Ruben said

    Greetings Juan has given me problems with windows 7, waiting to be removed

  107.   short said

    And when will the release of the different BBs of the 4 come out, greetings and thanks for everything

  108.   jajereal_86 said

    I have tried adding the compatibility windows xp service pack 2, with itunes open and nothing, I have restored and now I am going to finally try to stop bonjour, in Start »Control Panel / Administrative Tools and then in Services. You select disabled, stop and accept. let's see how are you

  109.   johnpalancatf said

    If I have 4.3 should I upgrade to 4.3.1? Thanks

  110.   George said

    Alex, you have disappeared sharing the internet because of the restoration from scratch. You must enter settings, general, reset and give the option to reset network settings. This will solve the problem.

  111.   migueloxx said

    With view it has not worked for us, neither as an administrator, nor as anything. With Windows 7 starter and a Samsung n130 netbook running smoothly. We are playing around to see how it goes. All the best!!

  112.   Iñaki said

    can someone please help me? Redsn0w gives me an error. It tells me that redsn0w stopped working. Because it can be?
    I open it as an administrator and all that. And I use windows vista. Please help.

  113.   bRC said

    excuse my ignorance, but I am not very skilled in these issues, what do you mean: Windows XP SP2 compatibility mode? if I have windows 7 starter and I just run as administrator is it? Thanks a lot

  114.   Rodrigo said

    Hi, I have a problem. I have an iPhone 3GS Fw 4.2.1 with New 6.15.00 baseband button and I have windows, how can I do the jailbreak? Will FW Custom of Version 4.3.1 be uploaded? Can you help me, please?

  115.   Shawn said

    Yes sirrrr the dev team if you do good things a serious man xD a question ... I have not updated it yet because I need apps d cydia cm (iblacklist, lockinfo, controls music pro, sbssettings, ifile, etc) I need to know if these are compatible now with 4.3.1 Anyone who knows this doubt? Greetings

  116.   jajereal_86 said

    iñaki the same thing happens to you, I have added compatibility windows xp service pack 2, run as admin. e deactivated bonjour… .e tried with itunes open and redsnow hangs on me. I think the problem is because of the windows vista. the only option I have left is to try on a pc with windows xp or wait to see if greenpoison or another launches jailbreak and see if the same does not happen, because in previous jailbreaks that I have done they have never given me a problem.

    greetings.

  117.   migueloxx said

    Iñaki, if you can try another pc with xp or 7, you probably won't have any problem.
    Brc, we have made it run in 7 starter without touching any compatibility, just try it, the most that can happen to you is that an error message appears in Windows, you restart the iPhone and fix it.

  118.   SERGIO13 said

    Hello everyone.
    I am new to all this and I would like you to give me a cable.
    If I do the JB to my i phone 4, can it become unusable and if possible can it be recovered? I have version 4.3.1. I don't need to restore again, right?

    THANK YOU IN ADVANCE AND CONGRATULATIONS GONZALO YOU ARE A CRACK!

  119.   basket593 said

    I am trying several times, I have a 3gs, I released it in 4.2 with greenpison several times, but now I am finding it impossible to do it, the redsnow completely hangs on me, I use win7. Any solution?

  120.   Iñaki said

    but is there anyone who could have done it in sight?

  121.   George said

    After three unsuccessful attempts, it finally worked on my Itouch4g.

    Now it's rebooting….

  122.   Rodrigo said

    Hi, I have a problem. I have an iPhone 3GS Fw 4.2.1 with New 6.15.00 baseband button and I have windows, how can I do the jailbreak? Will FW Custom from Version 4.3.1 be uploaded? Can you help me, please? PLEASE that I have commented on this post and on the previous one and nobody answers me

  123.   SERGIO13 said

    Where is it supposed to be the version that asks you when you give the browse me and downloaded the firmware and I thought it was there but when activating the program, no .IPSW file appears
    Please help I'm anxious jejeejejej greetings and thanks again.

  124.   ferran said

    all ok but i don't get the cydia icon. I know why this is because if I look for it with the search engine I get it and I can access it but the icon does not come out. does anyone know why ??

  125.   Doppel15 said

    Shawn: Here you can see the compatibility of the Cydia applications to the new Firmwares.
    I recommend everyone not to be so anxious and wait a bit, in general it takes a while to update Cydia Apps, Hack and Mods to the new Firmwares.
    I hope it will be you useful:

    https://spreadsheets.google.com/lv?key=tz1lkTAAwtDi_7HJxef0Vgg&type=view&gid=1&f=true&colid0=3&filterstr0=Yes&sortcolid=-1&sortasc=true&rowsperpage=250

  126.   Domenico Falzarano said

    JB 4.3.1 ready, use win 7, without running as managed or adjusting compatibility with xp SP3! all good!!!

  127.   jajereal_86 said

    Let's see people, in the end I managed to make JB with WINDOWS 7, the problem was that windows vista is crap and has compatibility problems, that's why redsnow hangs.

    regards

  128.   basket593 said

    Well, I am unable to do it with win7

  129.   Alex said

    Well, I also tried it with win 7 and it hangs when it says downloading jailbreak data ... what can I do people?

  130.   SERGIO13 said

    Please someone answer me, where is the .ipsw file supposed to be, which is the firmware, right? And if I already have version 4.3.1 on my iphone, can't I skip that step?

  131.   Logan said

    When choosing the firm it says "unable to recognize specified ipsw" and does not let me press next ... does anyone know why? : S

  132.   jajereal_86 said

    To those who give you an error with win 7, try win vista or xp. anyway with win 7 add the compatibility of windows xp service pack 2 by right-clicking on redsnow and accessing compatibility, then run as administrator to see if you can.
    PS: my win 7 is not Starter.

  133.   Jose Avila said

    Logan what I recommend is to download the ipsw again I think you have a problem and that is why it shows you that message that is that it does not recognize the file as an ipsw is my recommendation

    regards

  134.   Pixie said

    Those who have problems with Redsnow, as it happened to me, Iñigo, etc ... Try something as simple as what I have done: restart the computer because I had not done it after updating iTunes.

    Greetings and luck. It worked out for me and I'm going to start configuring it.

  135.   lancerx said

    With itunes open and XP SP2 compatibility mode, redsnow worked perfectly for me, before I was stuck in downloading ramdisk, and after that it worked for me the first time.

  136.   Tony said

    A question that may be too silly, but I'm a bit new to this, I ask it or I bust it, haha. I have Iphone 4 with IOS 4.2.1 and Jailbreak made through Greenpoison. What do I gain by updating to 4.3.1 and jailbreaking it with Redsn0w?
    The iPhone works fine for me as it is, and I'm wondering whether to update it or not. What do you recommend? Because if it's only going to improve my speed in Safari, it's not worth it.
    I hope your help. A greeting

  137.   basket593 said

    @ jajereal_86 Thank you very much! I finally got it, thanks really.

  138.   Pablo said

    Everything worked fine, but Cydia is not doing very well and a bar appears with the apple loading; I don't know how to fix Cydia, I also get red and yellow index errors.

  139.   Alex said

    Thanks Jorge but nothing still appears to me, I get Airplane mode Wifi notifications location and operator, and it is supposed to appear between wifi and notifications.

    The case is that strange things happen to me, maybe I get into adjustments and it comes out and sometimes not ...

    And I tried activating the 3G, deactivating it, turning the WIFI on and off.

    Any solution?

  140.   srlobo said

    Made with 3Gs and working ok!… For now xD

  141.   Rodrigo said

    I have already done it, I have an iPhone 3GS New Botom with baseband 6.15.00 from the ipad and I did it in the following way I downloaded the «sn0wbreeze-v2.5» then in the sn0wbreeze-v2.5 press the version to keep the baseband that It is the first then I gave it to continue then press to activate the gestures and hack activated after that charge there is a procedure to be done to be able to restore without problem pressing a sequence similar to redsnow I did it then I restored it with iTunes and ready without problems running the cydia everything I write my experience here because nobody helped me when I asked repeatedly in both posts so that it does not happen to someone else 🙂 I hope they have served you a cordial greeting to all

    R

  142.   Logan said

    @Jose avila OK. I'll try ... Thank U

  143.   and said

    hi gonzalo! perfect jail with windows 7 and 3gs new boot

    I have restored that to the strip that did not do it, but I have lost all the apps… again it is time to install….
    I would like to know if there is any program that will make a copy for you so that after restoring it will leave you the same apps installed.

    thanks and regards!

  144.   SERGIO13 said

    friends, I don't know what to do anymore but I can't get the firmware that redsnow asks me, I've already downloaded it three times, how can I solve it, thanks again

  145.   betierrealzale said

    Cydia doesn't work well for me either .. I get errors in red and yellow. All the best

  146.   Jose said

    Hi, I have an iPhone 3GS with the serial number 87044… Can you tell me if I have new or old bootrom to be able to jailbreak? Thank you and cheer up, you are machines.

  147.   Jony said

    Everything almost perfect.

    Since I have updated to ios 4.3.1 I only have a coverage streak when I normally have it full. As soon as I update and the same thing happened to me, then I returned to 4.2.1 (it marked the coverage well) and now I have returned to 4.3.1 and the same thing happens to me.

    How can I solve that?
    Salu2 and thank you

  148.   Pixie said

    I need help, guys. I have done everything correct, as always. But now it turns out that the operator does not recognize me !! I can't call and the phone is all legal, come on I don't need release. Someone gives me a hand?

  149.   Spark said

    I need help, when I unzip the fir 4.3.1 in the generated folder there is no .ipsw and if I try to jail with the firm from the itunes library at the end of the process, the iphone always stays in recovery mode and as an option only let me restore with itunes, thanks in advance.

  150.   Maria said

    Chispi, the same thing happened to me, after downloading it twice, I tried with mozilla, when you download the firmware in mozilla it creates the .ipsw file for you, with explorer, which is how I used to download a tablet and when opening it, the .ipsw did not appear anywhere. You can't download it either with Safari.

  151.   nefi said

    thank you very much.

    someone knows how to activate Multitasking Gestures ios 4.3.1 on ipod touch 4g

  152.   SERGIO13 said

    sparkle ami the same thing happened to me and it is very simple and I changed the extension of the zip file that we have downloaded and bingooo ara I am in the next step I will tell you thanks

  153.   Jony said

    The same thing happens to me, I have run out of coverage, when in ios 4.2.1 I had full.

    Does anyone have the solution?

  154.   yore said

    Pixie ... the same thing happens to me, maybe if we restore and try again ....
    Has anyone fixed this problem ???

  155.   chinolee said

    Win Vista crashes, does anyone know something?

  156.   zerocoolspain said

    Well, after putting 4.3.1, pkgbackup does not work for me to restore ... so I go back to 4.2.1 until a new version of the software comes out, since I have bought it at least to be able to use it

  157.   jajereal_86 said

    good again, as I told you to get JB done but cydia is not doing very well, let's go, it's worth it… .and I've read people that the same thing happens to him.
    I'm going to restore it again and do JB again since I tried to do it a few times in a row before I got the JB and get out of the dfu mode.
    If after this cydia does not go well ... it would be a real shame ...
    regards

  158.   Pixie said

    @yore I have already found the solution! I have restored it again and before starting the jailbreak with redsnow what I have done has been to open itunes once the pin is entered in the phone. Then you close iTunes and proceed with the jailbreak.

    Cydia works very well for me, very fast. Some packages fail to download but what is the app is doing very well.

  159.   Spark said

    Thank you SERGIO13, the firware thing was why you comment, but I still have problems, I do all the steps correctly and without any problem, the jail does not end and the iphone remains with the usb screen and the arrow, I mean itunes, and when you open the latter, the happy message that an iPhone is detected in recovery mode and to restore, I'm crazy people, please help.

  160.   javichu said

    Manually change the name of the file, from .zip to .ipsw, and you're done with that.

  161.   xarlyf said

    A silly question…. I have the iphone 4 in 4.1 with jail,
    Before doing this jailbreak, is it necessary to update it to 4.3.1 with itunes?
    Or does redsnow update it for you?

    Thanks in advance.

  162.   william said

    a single word RELEASE xfa 🙁

  163.   martin said

    Could someone who has the 6.15.00 baseband confirm if the 4.3.1 works with the gps and the location?

  164.   nefi said

    xarlyf you must first update to ios 4.3.1

  165.   Spark said

    Finally, thank you all very much.

  166.   iPhoneFour said

    Everything has gone perfectly for me, I only have one doubt and question to ask, previously I had version 4.3 and this brought me multitouch gestures enabled by default, I never had to activate them in fact I already brought them without having jailbroken and now I update to 4.3.1 and I see that it does not bring them, I never used this function since it seemed tedious on an iPhone, but it catches my attention, since if they had installed it, I had not caught it, has it happened to someone else?

  167.   Rodrigo said

    Martin: I have the 6.15.00 baseband and a couple of hours ago I did everything and I have the 4.3.1 ready without problems and I tried that of the GPS and according to my impression it improved and the location if it works 🙂

  168.   jpc said

    Hello! I am new to this kind of thing, a friend made me the JB to my Iphone 4, I have firm 4.1, my question is, if I update to 4.3.1 what happens with my applications and my games got? They disappear? How do I do? so that this does not happen, thank you all

  169.   nacho said

    I can not find any ipsw file in the firmware zip of the iphone, do you know what happens, greetingssssssssss

  170.   Alex said

    For those of you who are left on the USB screen, simply with TIny umbrella and the iPhone connected, you select the phone in DFU mode on the left and then Exit Recovery.

    I have another problem and it is that the coverage of the iphone has dropped a lot. Has it happened to someone?

  171.   Marian said

    a question ... do you get multi-touch gestures in 4.3.1? because I'm not getting it! how are they activated?

    a greeting>!

  172.   Rodrigo said

    Mariano: I don't get it either, but what else gives a few gestures plus a few less does not matter, I think the idea is to have it updated and that everything runs fine, although for there I was investigating how to activate the 4.3.1 multitouch gestures from windows but not I am really interested, they are wasted time activating them with that I tell you everything xD.

  173.   Esteban said

    Dear ssss,

    Features:

    iPhone 4
    IOS 4.3.1
    Windows 7

    It worked perfectly smoothly on the first try.

    Doubts: Nowhere do I find the option to activate the native IOS 4.3.1 HOTSPOT. I have read on some websites that it is by request or decision of the operator.

    Now, is there any way I can activate this feature ???.

    Thank you,

    Stephen Moreno

  174.   Rodrigo said

    I have a problem I cannot install the winterboar to be able to put my themes etc. Who can help me?

  175.   martin said

    Rodrigo: when you say that the GPS has improved, is it functional? I understand that in 4.2.1 it did not work, like the localization, for basebands 6.15.00 (I was always with 4.1 and I could not confirm it personally).
    Anyway, it seems that it is good news, to see if someone else comments on their experience with the gps and the location with the 4.3.1 and the 6.15.00 baseband.

  176.   Sergio said

    I think it is not worth updating.
    It is giving many problems.
    The installous does not install the ipas, it says that they are not valid.
    Everything is slower (especially Cydia and Installous)
    Safari does not go faster as they said.
    I have less free memory (2GB less)
    The multi-touch function does not work.

  177.   ivan said

    Forgive me but it is the first time that I do the jailbreak, once it is done, how do I reinstall paid applications that I already bought, such as whatsapp ??? when I enter iTunes it tells me if I want to restore a saved copy of this iPhone, or if it is a new mobile ... what do I do? Thank you very much and forgive my ignorance ...

  178.   Rodrigo said

    Martin: Exactly I opened it to check if the matter had been fixed and improved only that the first time you open it before opening it, you have to go to location and activate compass maps and then open it when you open it as if it identifies a location. What to see, you wait a while and you mark the one that corresponds then you close, you wait a while you open the GPS again and it already identifies the place that corresponds 🙂 at least that happened to me and I will explain it to you, now well and I had problems in installing winterboad does not even give me the option to install if you can help me it would be great and the other thing that as many do not get the option of the new multi-touch gestures: /

  179.   Pixie said

    @ivan, you should have "transferred purchases" by hitting the second button on itunes and it passes them to you.

    Anyway, it restores the previous backup when you connect it again.

  180.   ivan said

    @Duendecillo, then I have to pay the whatsapp again or restoring the backup is solved ???

  181.   Javi said

    @Ivan
    I think that restoring it will solve it, but you will never have to pay for an app twice. If you go to the appstore and give WhatsApp to buy, it will tell you that you have already bought it and you download it for free ... Salu2

  182.   cyber block said

    Hello, I need to know how it runs in compatibility mode windows xp sp2, since this sounds a bit like Chinese to me.
    Thank you.

  183.   mihiblack said

    Personally I do not recommend updating, it is not worth it, my browser is slower, the battery does strange things like staying at 100% and then lowering the shock, backgrounder does not work with this version, if I use the vga cable to watch movies By airvideo once you give Play you cannot advance the movie ,, several repos de cidya appear empty when they had never given me problems before ,, in order to decide each one, since then it does not compensate me, greetings!

  184.   Gorka said

    hello friends I already have everything installed but cydia does not open me, do you know why?

  185.   xusi said

    Perfect update and jailbreak !! To say that in my opinion it is worth updating to the latest version, 4.3.1! Greetings to all!

  186.   Cerial iQ said

    Well, I tried it on my ipt3g, but the multi-touch gestures didn't work for me anymore, so I tried again, and they didn't work either, for some reason I went to the sn0wbreeze page, and I realized that the new version is already ready.
    so I created a custom ipsw for my ipod, and voila, it looks the way I like it, even working with multi-touch gestures.
    Salu2

  187.   bRC said

    Thanks to this tutorial I finally dared to jailbreak for the first time and right now everything without problems I think, although it is true that it feels a little less fluid.

    Since I am new to cydia I have been reading tutorials on how it works, but no application is installed, I have tried the winterboard and sbssettings, so any expert who could help me please would appreciate it since right now I do not see difference between have jail or not. Thanks a lot

  188.   bRC said

    I would like to add that I have restarted the mobile and it has taken much longer than normal

  189.   Maicom said

    Hi guys, I just did the JB with Redsn0w to an iphone 4 with version 4.3.1 and for now everything is perfect, I only have one drawback and that is that the iphod application to listen to music closes every time I give it, I have already tried to restart and nothing to see if someone has a solution, you are all the best XDD.

  190.   Gorka said

    Hello friends when I update to 4.3.1 I get the error 1015 or so do you know how I can solve it? Thanks a lot

  191.   liferito said

    Hello, well, everything is ok, but it does not take coverage, it stays in a line and I have no way of going up from there

  192.   netherlands said

    One question guys, if I have version 4.3 do I have to restore before doing anything to 4.3.1? or do I start the redsnow directly? and another question .. should I have the mobile connected and turned off when starting this tutorial? or should it be connected to the pc, turned on, and with itunes closed? thank you guys

  193.   Rodrigo said

    Hello, for all those who did not get multi-touch gestures I will tell you about my experience, today I did the 4.3.1 jailbreak, first I downloaded elsn0wbreeze 2.5 I created a Custom FW Choosing the option to keep baseband create the custom and update or restore it with the custom created then apply Redsnow and everything fine but I did not get the multi-touch gestures option in Setting or Settings so I decided to do everything again and opened the sn0wbreeze again and press the EXPERT option and leave activated the option for multi-touch gestures and another For the SHH only those two left tight and updated with the Custom created, I finished the operation and now I just got the option of multi-touch gestures and in fact everything is better for me 🙂 I hope my experience has served you so that you do not get impatient for some defect, spirit and strength for all.

  194.   doohan200 said

    I also have the coverage problem, just a line

  195.   Vtefoy said

    All good in 3gs of movistar with 4.3.1 some failure in the download of cydia packcages ... But perfect coverage and others.

  196.   mc4ever said

    Same coverage problem… Do you know why ??? Everything else is perfect.

  197.   Rodrigo said

    I think that for those who have dramas with the coverage do everything again or do a custom FW with sn0wbreeze, because so far there are few with coverage dramas, it must be that the jailbreak has been done, for those, I recommend that do everything again calmly and patiently, I did everything again and everything well 🙂, even the winterboard runs me without drama 🙂 I still have to try the SBSETTING but I think I will also run 🙂 good luck guys and do everything again and with patience

  198.   Ralphy said

    Hello everyone, I do everything but when it starts to load the firmware it hangs in uploading ramdisk and from there it does not happen. Can somebody help me? Thanks.

  199.   Rodrigo said

    Hi Ralphy, I don't know exactly why that happens to you but I think that if you restore everything again either with the Official 4.3.1 FW or a 4.3.1 Custom Made via Sn0wbrezze or PinTools. for i, when using Redsn0w that should not happen anymore.

  200.   Ralphy said

    Incredible, if I write before I do it. All done. Thank you anyway. Greetings to all

  201.   Shawn said

    Good evening, here you have a very important thing that you should keep in mind when updating «» »Cydia Applications Compatible with 4.3.1« »I leave the list that is being updated ... a cordial greeting cmpis

    http://www.foroiphone.com/aplicaciones-cydia-icy-installer/34090-listado-oficial-de-aplicaciones-de-cydia-compatibles-con-4-3-1-a.html

  202.   kinthero said

    I do not know what happens I install something from the istallous and it does not work for me it says error, I could not do anything without intallous

  203.   Rodrigo said

    kinthero: hello man, look you have to install this first after installing it I recommend you turn off the phone and turn it on then how to restart it, here is what you have to install: http://***************.com , I hope my help has served you best regards

  204.   nembol said

    Is there something I do not understand .. when the iPhone is updated? (I have 4), I am downloading iOS 4.3.1 and redsnow, I don't need to release it, I just want the jailbreak.
    These are the steps? :
    1: open redsnow, 2: click on browse and select the firmware, 3: hit next, select 'install cydia' and hit next again, 4: do the steps it says.

    I have iOS 4.1 with Limera1n and I always use geohot tools (also on an iTouch 2G) so I don't know how these are.

  205.   Rodrigo said

    nembol: hi man, I recommend you follow these steps from the following link:https://www.actualidadiphone.com/2011/04/04/tutorial-como-hacer-jailbreak-untethered-a-ios-4-3-1-usando-redsn0w/ , there is everything clear 🙂

  206.   Antonio Nuli said

    I just jailbroken my iPod touch 4.3.1, everything perfect, now I just install some Cydia repos 🙂

  207.   John said

    Install everything Ok, now no phone operator recognizes me, does anyone know the solution? My iPhone is 4 and it is free bought in istore

  208.   manuel tapia said

    Clever! iPhone 4 working excellent .. without setbacks, I already had 4.3.1 but I don't need to unlock for now ..

  209.   Michael Fab said

    @Antonio nuli, please confirm if the rotation lock button in the multitasking bar appears black. It only works for me to make the iPod mute (mute)

  210.   netherlands said

    Jueee uncle wena wenisima, as they have already said more than 3 times hahaha GOOD, jailbreak in less than 2 minutes without any kind of complication, everything working perfect, coverage, ipod, gps ... everything, everything very well, cydia installed without moving a single hair joer incredible the work of these people .. xikos a 10
    comment ... restore from 4.3 to 4.3.1 as the brico says .. and then I closed iTunes and with the mobile as is, connected to the computer, I followed this brico, and the truth is very easy ....
    Another point ... start the reds file ... with windows xp sp3 and administrator mode ... and even if the program came out simplified, it seems that it has worked 100% as well ....

    MUXAS THANK YOU TEEAM

  211.   MAX said

    SEE I ONLY HAVE A PROBLEM WHERE UNDER THE iOS 4.3.1 BUT WITH EXTENTION .IPSW
    THIS LINK THAT YOU PUT ONLY DOWNLOADS IT IN .ZIP
    BUT DO NOT DOWNLOAD THE .IPSW WHERE I DOWNLOAD IT PLEASE HELP !!!

  212.   JJavi said

    After reading multiple problems I am being lazy to update !! and deciding to stick with the 4.0 jailbreak…. However I have not read problems with the 3GS but quite the opposite ... Any 3GS with problems after jail 4.3.1?

  213.   Pixie said

    I am going to try to explain to you how I solved the operator problem although I already did it in previous comments. Have to start over:

    Go iTunes and click on RESTORE with capital letters pressed. You select the original firmware that you have downloaded.

    Well, the iphone is now like new and updated. Since our phones are legal we have to make itunes recognize them. With iTunes CLOSED or the phone disconnected, you have to enter the sim pin. Now we open iTunes and it already recognizes us as all legal and that's it.

    Now proceed to jailbreak: close everything and open redsnow, follow the steps of the tutorial selecting the downloaded firmware and let the process finish.

    When it restarts we will have everything ready to download the key Cydia packages and get all the performance.

    My iPhone 4 with 4.1 jailbreak started to give me problems, this one has come to my mind.

    Encourage those who do it for the first time. It is not complicated and it is worth it. Greetings.

  214.   javi said

    @pixie
    Thanks for the clarifications. Doing it to 'restore' leaves it as when you buy it, right? I mean deleted apps, contacts recorded on the phone, etc ... Any way to recover everything?

  215.   delars said

    Everything's fine!!!. Now, a pain in the ass to reinstall the Cydia applications, one by one and by hand.

  216.   delars said

    Oh, one thing, the 4.3.1 didn't have multi-touch movements? Where is it activated? What are these movements? Thanks.

  217.   nacho said

    Urgent, now my iphone does not turn on, what can I do?

  218.   pixie said

    @javi Exactly, he leaves it as when you buy it, so before restoring you must save a backup in which contacts, photos, settings, etc. are stored. Once you finish all the processes you can restore the copy and you will have everything saved.

    @delars Multi-touch gestures are disabled with redsnow. To activate them you have to jailbreak with snowbreeze

    @nacho try turning it on in dfu mode: S

  219.   Javi said

    @duendecillo Thanks for the answer. So it is to make a backup (what is done right click on the itunes on the iphone?) And then once the jail is done, in the same way but restore?
    If it is that simple, you would make the task much easier for me because the last time I jailbroken (ios 4.0) I lost everything and I had to put everything by hand ...

  220.   Alf16 said

    Well, I'm in 4.2.1 with a released I4, I finish doing everything (more than an hour in the uploading first step part)… and… I'm still in 4.2.1 !!!!… cohonudo!

  221.   Pixie said

    @javi That's right. First step you make the copy with the right button and once the whole process is finished, iTunes will recognize the iPhone as new and will ask you if you want to restore the existing copy. You do it and you're done. If for any case it does not automatically ask you then right click and retrieve the copy. I hope to help you because at the moment I am happy with the update.

  222.   lucasprol said

    Hello, I wanted to ask you for help, because when I download Firmware 4.3.1 for iphone 4 from here and open the folder, I unzip the file, the firmware does not come out, that is, the file (.ipsw). download it from another website and the same; does anyone know why?

  223.   lucasprol said

    Sorry, I forgot to comment, I have a free iphone 4 with firmware 4.2.1, and my computer is window xp. I keep trying, but more of the same, when I unzip the rar, I get files and 1 FIRMWARE folder, but inside this 2 more folders and a .BBFW file, the folders are all_flash and the other dfu, but no trace of the .ipsw . Please if someone helps me, thank you very much in advance

  224.   javiside said

    Hi there! I have a little problem. When I get to the step of putting him in DFU mode it won't let me. I get a message saying "No device detected. You probably misunderstood the instructions. Please consult Google or YouTube for instruction on how to enter DFU mode »
    I know what the message means. But I've been trying about 10 times and there is no way!

  225.   td said

    I have problems updating with game center. The old game center appears with the hacked records. Has this happened to anyone?
    What I can do??

  226.   Small said

    I have to say that my iPhone 3Gs updates without problems to the 4.3.1 jailbreak.ado. The problem I have is that it does NOT connect to the telephone network. I unlocked my iPhone 3Gs via IMEI a while ago and this has never happened to me. It is normal? Do I have to wait for the ultrasnow despite being IMEI released? O_o

  227.   Javi said

    @ pixie. Thanks again for the response! Now I get to work. Let's see how, I knock on wood, I want to watch football ... 🙂

  228.   estivill said

    For those who do not see the ".ipsw" file.
    What you have to do is go to folder options and remove the option "hide file extensions for known files", once this is done, enter the properties of the downloaded file and change the name by putting at the end ".ipsw" in instead of ".zip".
    In principle, this has to be solved and the icon will change, recognizing the change in format.

  229.   idyter said

    wenas can someone help me if my iphone4 is caught when it installs the jailbreak in the step of uplading ramdisk, and followed the guide to the dediyo Thanks in advance a greeting

  230.   Javi said

    Made on the 3GS and running smoothly. I don't notice much difference in performance compared to 4.0 ...
    Thanks to those who have given me a cape, especially pixie.
    It says it by pressing capital letters and giving update to the 3.4.1 downloaded. Then redsnow and then restored. Everything was left intact, except what was downloaded in cydia; pkgbackup did not work for me -> it seems that it installs it but, when I give reboot it does not do it and doing it manually it did not install the backup)

  231.   idyter said

    I got it, the famous cydia was installed and now what ???. Someone can give me a little cable xf is k in this of the iphones I am hit and I do not understand na de naa What should I do now? If I had a manual or something like that it would be great. and searched on the internet but I do not clarify. thanks in advance greetings

  232.   nembol said

    idyter, my email is: nembol@hotmail.es ask me what you want out there ..
    -------
    And I managed to install it ^^, the first time I put 'removing applications' and it took a long time and I thought it had been blocked and I turned it off (sleep + home) and the icons for iPod, settings, phone, mail, sms, and many more! So if you are going to do the same as me because it has been blocked or for anything else that I can't think of xD then restoring it from iTunes is fixed. Greetings

  233.   Miguelo said

    I installed JB but it didn't install Cydia correctly or let me open safari. SOS thank you

  234.   Ale said

    I have a problem: When redsnow should start patching the firmware it closes itself….

    That could be happening?

  235.   IPHONEFORAL said

    GOOD NIGHT FRIENDS HOW DO I KNOW WHAT KIND OF BOTROOM DOES MY IPHONE 3GS HAVE ???

  236.   Andrew said

    Hello .. I was trying to jailbreak my iphone4 .. I already had it with limera jailbreak for 4.1 .. I started trying to restore the phone but it gave me problems at the end of the restoration throwing me an error 1013 (and the iphone se the screen shows the cable to connect to itunes) .. I have done what they said to solve it .. but now in itunes it throws me that itunes has not been able to contact the iphone software update server because it is not connected to the internet: S .. and now the device no longer recognizes me in iTunes and I am in a standstill, I don't know what to do!

    I will appreciate your help!

  237.   Javi said

    @iphoneforal download the idetector. This one will tell you 😉

  238.   Gorka said

    Hello, can you tell me a solution for the operator? he won't let me call or anything
    help !!!! please

  239.   jesus said

    Hi, I'm new to this and I had version 4.3, I have restored and updated from itunes to version 4.3.1, do I also have to download firmware 4.3.1 from the link in this tutorial? or do I directly jailbreak with redsnow ??? thanks and greetings

  240.   test said

    Thanks Gonzalo, you are the best and the hackers too, thanks.

  241.   test said

    Jesus you have to download it anyway but you won't be able to do JB, or you download it from aki or good luck.

  242.   Oswaldo said

    If I have already updated the official firmware (4.3.1) to my iPhone 3Gs, can I do the Jailbreak?

  243.   m said

    Jesus you have to have it on both sites, updated on or on your iPhone, and downloaded to your pc to do the jb xq it will ask for the .ipsw file.

  244.   m said

    oswaldo: yes.

  245.   fadem99 said

    Hello everyone. I have a problem.
    I had the jailbreak for 4.1, so I downloaded version 4.3.1 (I don't need the unlock) so I installed it, but when doing so I get an error of impossibility of restoring the version, error 1013. I turned off the computer , I have the latest version of itunes, I have disconnected the antivirus and the firewall and nothing at all, I am with the iphone with the screen of the usb port and the connection to itunes.
    Not to do.
    Someone help me, because for now I have a nice paperweight.
    Thank you

  246.   fadem99 said

    I have tried doing the jailbreak with redsnow and it has started well, but it has stopped in the middle and I still get the usb with the itunes icon
    what do I do?
    Thank you

  247.   m said

    for fade99 and others, the error 1013 is because the iTunes detects that the hosts file of your pc has been modified, it gives both the originals and the ones that have jb, for this you must do:
    1. open tiny umbrella.
    2. you go to the avanced tab.
    3. Uncheck the Host to cydia tab and give aplly changes.

    If you get an error again, restart and do the same, and as the last case edit the hosts file making a copy before and leave it intact and delete the lines that you had to edit.

  248.   ipod said

    Good afternoon, I have been told that to jailbreak it, I have to restore it first, is it true, or do I just have to do what it says in the tutorial?
    thanks!

  249.   m said

    iPod: you only have to update to 4.3.1 from iTunes, then you must download the 4.3.1 firmware, open redsnow and follow the steps in the tutorial, and check that the ANTIVIRUS OFF, ADMINISTRATOR MODE AND COMPATILITY WITH WIN XP SP2.

  250.   m said

    fade about the error, don't worry, it happened to me. First fix the hosts file and do what I gave you, so that you do not get the 1013 error, once this is done, open iTunes and when the error gives you the process you must restore, so.

    1- Fix the hosts file so that it doesn't give you the error.
    2- Connect the mobile, open ituenes and, you have to restore: sift key + restore and click on the firmware.ipsw file that you had to download previously.
    3- With version 4.3.1 on the mobile, follow the steps of the tutorial taking into account that the antivirus is removed, I put in compatibility with win xp sp2 and run redsnow in administrator mode.
    4- Once you have the jail, download the apps you used from cydia and over all the installous.
    5- Open iTunes and in the applications section you will have them all unchecked, removing the free ones or the ones you paid for, select them all, and click and then synchronize and that's it.

  251.   Pablosky said

    The same thing happened to me, it wouldn't let me make a backup copy and it gave me error 1013.
    I reinstalled everything several times and nothing.
    The solution was as simple as checking the option to "change the time automatically according to daylight saving time" in the time zone tab in the properties of the date and time

  252.   Alexander said

    I have IOS4.1 with jailbreak and ultrasnow all this done with redsn0w in addition to baseband 6.15 I want to know how to upload to ios4.3.1 while keeping jailbreak?
    Can I use redsnow and do the whole process on top of the jailbreak I have?

    Thank you

  253.   m said

    Alejandro: I can't, you must update to the new one, and do the jail again, only that it will surely raise your bb, so you should not use ultrasnow, search for iPhone forum that they have a manual to update to 4.3.1 without upload the bb.

  254.   davidmr said

    It can be done with win 7 ??????
    It would be doubt.

  255.   fadem99 said

    thanks M.
    I'm afraid I have no idea what the host is. yes, every time I have tyniumbrella it tells me not to restore from tyni because I can "kill" the phone, do you know why?
    I managed to do the jailbreak with redsnow, which has been a piece of cake after being able to restore, to do so, change computers as it says in the help of Apple errors (in the other I have windows7 and the latest itunes,) with which it allowed me to restore and upload to the version 4.3.1 and then returning to my first computer, I was able to restore the backup.
    Done this, doing the jailbreak did not take 10 minutes

    Again thank you very much, it gives a tremendous peace to have the jailbreak working

  256.   m said

    Davidmr: Yes you can with win 7, but do the 3 tips so that you do not get errors, antivuris off, support win xp sp2 and run it in admin mode.

    Fadem: the host is a windows file that can be found in c.system32.drivers.etc and if by any chance, as was my case, you edited it so that it was a special problem for you, it is true when you update or test and how that file has been Modficado, skip the error 1013, I'm glad it worked for you.

  257.   bermejo_cuenca said

    URGENT!!
    It is the first time that I jailbreak my 3gs, I have done everything right and it has not given me any problems, until once I have finished I have absolutely no signal from movistar coverage. What should I do?

  258.   Javi said

    @bermejo_cuenca
    test in settings / general / reset / reset network settings

  259.   BigBoy said

    I did everything to skip the 1013 error lasts more than 5 hours without being able to restore from 4.2.1 to 4.3.1, I tried what they say here and they say on other websites, finally I read that removing the SIM worked and so it was, I installed without problems on iOS 4.3.1. Apply the jailbreak and you're done. thank you all very much 🙂

  260.   Alberto said

    Hello, this is the first time that I am going to jailbreak my iPhone 3GS with version 4.3.1 downloaded from iTunes. Look at the bootrom and with the iDetector it told me it was new. If I do it following the tutorial, I won't have any problems or limitations ??? It's that I'm not very fluent in this and I'm a bit scared.
    Thank you

  261.   Alberto said

    Thanks M. I said it because having the new bootrom, I have read some websites where it says that some kind of program is needed to turn on the iphone every time it is turned off.

  262.   durban said

    I bought the iPhone, I have it just out of the box and I wanted to do the jailbreak, which I must take into account before doing anything so that everything goes well, I would not like to run out of the iPhone .. hehe

  263.   JJavi said

    @durban: well done. An iphone without jail is like a woman without t *** s 🙂
    Well, I would synchronize with itunes and make a backup by selecting the option by right-clicking on the iphone icon in itunes ...
    The rest follow the tutorial. If it does not go well you can always restore. Luck

  264.   adslVODAFONEadsl.es said

    Durban: As Jjavi tells you, the only precaution is to make the backup copy to later be able to put the contact data, mail, etc. iphone, good luck and tell us.

  265.   afc said

    It works 100% on ipod 4, I just went from 4.1 to 4.3.1 without any problem

  266.   Sergio said

    Very good tutorial, I am in the same case of durban, new iphone 4 xD. As they say, the first thing is the backup, then you have to update version 4.3.1 ??? necessary??
    thank you very much, greetings

  267.   torrent00 said

    Hello I have a problem. I do the jailbreak following the tutorial and my iphone is left with the "Dowloading jailbreak data…." on the screen and does not advance from the two little lines «uploading ramdisk» on the computer. Any solution?

    Thank you.

  268.   adslVODAFONEadsl.es said

    @Sergio; Being new, make the backup by the subject of mails, sms, contact, photos, tones, etc. and you have to update the version, first on the mobile with ituenes, and then download it to the pc, to use it at the time that redsnow asks you.

    @torrent: remove the antivirus, do it with win xp sp 2 compatibility, run it in the admin mode, close all the applications you have open, and if all this does not work for you, try to try it on another pc. you already tell us.

  269.   Sergio said

    Thank you very much, I have one last question, to jailbreak you have to remove the sim ??? or it doesn't matter. Greetings

  270.   adslVODAFONEadsl.es said

    @segio: it is completely indifferent, I did it with the sim on and I did not have any problems, there were people who gave them problems, I removed it and it worked, but come on, make a mistake or not, it shouldn't, not the sim absolutely nothing happens to him.

  271.   torrent00 said

    Hello, I have made progress, but it still does not work. I get to go from the "uploading ramdisk" even when the white letters appear writing on the screen and when they finish. My iPhone turns on, I check the version, and if it is 4.2.1. Any help?

    Thank you.

  272.   Sergio said

    Hello, again me, you know that my iphone 4 has version 4.3.2, and this tutorial is for 4.3.1. How to do the jailbreak. thank you very much greetings

  273.   Sergio said

    hello, in the previous question I was wrong, iTunes gives me the option to update to version 4.3.2, and my iphone has version 4.1… how do I jailbreak ???? another question, is it necessary to update? ? Thanks

  274.   JJavi said

    @Sergio
    Hello, the jailbreak is for version 4.3.1. If iTunes offers you the possibility of updating to 4.3.2, you will no longer be able to update it automatically through iTunes, but you will have to download 4.3.1 from here, and update through that download as follows: Having the 'key shift '(capital letters) pressed, you give update in itunes; The 'browse' will open for you to mark the path of the ios 4.3.1 downloaded from here ...
    Once updated to 4.3.1, follow the tutorial… salu2

  275.   torrent00 said

    URGENT !!! I have managed to do the jailbreak, but now the iPhone does not detect the SIM and I do not have the operator active or anything, I have done the resetting of the network settings but it does not work. ANY HELP PLEASE ???

    Thank you.

  276.   JJavi said

    @ torrente00: I would try to restore it and do it again without the sim set. I seem to have read something like this ...

  277.   torrent00 said

    Hello JJavi I have done what you have told me and it does not work… .. Another solution? ¿?
    I'm incommunicado!
    Thank you

  278.   ajf said

    Greetings, I have an iphone 4 version 4.2.1. firmware 03.10.01 with jailbreack with wreenpois0on, I hope I wrote it well, I bought an x-sim turbo to release it, and everything is fine, only the battery goes like water very fast, and another thing if I update to version 4.3.2. 3194 because the person who sold me the x-sim told me that if it worked with that version I wanted to update it in iTunes and it won't let me get error XNUMX, can you help me, how can I update it and the battery? it runs out very fast. Thanks in advance for your help and attention

  279.   Sergio said

    Thanks JJavi, I did everything to the letter, and it worked perfectly

  280.   Durban said

    Hello, to update to version 4.3.1 in itunes as I do, xk updates me directly to 4. 3.2 .. from where do I download 4.3.1?

  281.   gnzl said

    adsl vodafone has been banned by continued SPAM after being notified

  282.   Then said

    Friends. I read all this and it makes me want to cry. Well, to my iPhone 4, when I was updated to 4.3.1, it gave me error 1013. And I couldn't restore. And by BOBO do not paste it on another machine. And I made several attempts and took it to the telephone exchange and they gave it to me on Monday the 25th. I want to CRY = (

  283.   durban said

    I already did it and everything came out perfect, if you follow the steps it goes well. Thanks to the k you advised me

  284.   JJavi said

    @ torrente00: joer que pu ** da, I saw that a day or two later came a news to do it by another method. Try to see or ask in the forum, to see if someone can help you. I have no idea sorry ...
    @sergio: perfect!

  285.   JJavi said

    @ torrente00: joer que pu ** da, I saw that a day or two later came a news to do it by another method. Try to see or ask in the forum, to see if someone can help you. I have no idea sorry ...
    @sergio: perfect!

  286.   Christian said

    hello my problem is that when I install cydia and install installous it does not appear installed, then I install cydelete k it asks me to restart the device and when I click it it stays frozen and I have to restore the iphone. I tried it about 5 times and any solution always happens to me the same?

  287.   gabriel said

    Problem after doing the update, the operator completely misconfigured the iphone, it does not recognize the sim phonebook, or the phone number, or anything ... now I only have an ipod instead of an iphone, what can I do to configure the operator, the sim, my number to call and receive calls ...

  288.   research paper help said

    These pictures make many problems solved. I understand how to cope with them.

  289.   Julian said

    Hello, could you give me a hand? I jailbroken an iphone 3gs that does not need unlock (it is used with the company that was bought) in version 4.3.1 baseband 05.16.02. After the jail was made, the coverage was completely lost and it does not catch more. What can be? and approve to restore network settings and nothing. Thank you very much, greetings.

  290.   Josele said

    hello people ... let's see I have a very strange problem and it is not solved ... .. I have downloaded the firmware 4.3.1, I have the update 4.3.1. I don't know if I have to download another one or this one is already worth it, I have also downloaded the redsnow this .... so far everything is fine, I run redsnow but look for the files these d firmware ipsw. They do not appear on the screen ... ..and it puts ke to put in administrator mode my question is what do I have to put in administrator mode ??? and pk do not the files come out these d ipsw ????? If you would like to answer me, I will thank you ...
    For the record, I am not any luminaries in the matter of computer science
    Thank you

  291.   ismael ardid said

    Hello, my question is: I have an Iphone 4 with version 4.2.1 with JailBreak on, and for a long time iTunes has told me that version 4.3.3 is already available. I have many applications downloaded with the "Installous" of Cydia, and I would like to know if when I update to version 4.3.3 everything that I have downloaded, do they charge me? Or is it erased when going to version 4.3.3? When going to version 4.3.3, does the iphone run out of JailBreak and the applications? And in case I want to keep my applications downloaded with "installous" from Cydia, How do I do it? Sorry if my question is extensive, but the iPhone belongs to my uncle and I don't want to delete anything or break it, thank you very much !!.

  292.   lol said

    @ismael Ardid My advice is don't update. Check the box for iTunes not to remind you again and only update the software if it is really worth it. If you update you will not notice anything, except that it will remove the jailbreak and everything installed from cydia. They will not charge you anything but you will lose everything for nothing ...

  293.   firex48 said

    Man, can it be done without a usb cable? If you can, please let me know since I don't have the cable
    and more on top I have the Chinese iPhone but a friend has the same one (same Chinese) and he installs games and says he does it this way

  294.   firex48 said

    By the way, I don't have a usb cable but I transfer music and videos through a card adapter, will that work?

  295.   Otto said

    Hello friend, first I want to congratulate you for the contribution, note that I made Jailbreak to my iphone 4 with this tutorial but now the wifi stopped working and I restore the networks but it continues as I do xfavor me super urge !!!!!

  296.   Sami said

    I am arta of this mobile I do not know what to do if someone can tell me where I can take it so that they can put all the programs that I want messenger facebook calendar that sounds god I am afraid of having bought it for someone to help me please

  297.   Carlitos said

    A question…. this jailbreak also surveyed for ipod?