Tutorial: how to jailbreak untethered to iOS 4.3.3 using Redsn0w

With this tutorial you can do jailbreak untethered to iOS 4.3.3 from Windows and from Mac.

Works on iPhone 4, iPhone 3GS, iPod touch 4G, iPod touch 3G, and iPad 1. Not compatible with iPad 2.

YOU NEED:

Firmware 4.3.3

RedSn0w

Windows

Mac

TUTORIAL:

Restore your iPhone normally from iTunes

If it doesn't let you restore Open TinyUmbrella and uncheck the option to "modify the Hosts file"

(NOTE: if you don't want to upload the baseband to release it later use Sn0wbreeze or PwnageTool)

NOTE 2: if you have BB 6.15.00 you cannot restore, you will have to use Sn0wbreeze or PwnageTool.

1 Tutorial: how to jailbreak untethered to iOS 4.3.2 using Redsn0w


Open Redsn0w

if you use Windows run it as administrator and in compatibility mode with Windows XP SP2

Press browse:
21 Tutorial: how to jailbreak untethered to iOS 4.3.2 using Redsn0w

Select the firmware 4.3.3 that you have downloaded

Press next

5 Tutorial: how to jailbreak untethered to iOS 4.3.2 using Redsn0w

If you have a 3GS you will get a warning like this:

451 Tutorial: how to jailbreak untethered to iOS 4.3.2 using Redsn0w

Select Yes if you have a 3GS with a new bootrom and no if it is an old bootrom

Select install Cydia

In this step you can choose if you want to put a startup logo or multitouch gestures on the iPhone 4.

6 Tutorial: how to jailbreak untethered to iOS 4.3.2 using Redsn0w

Connect your iPhone, turn it off and follow the steps:

Press Power for two seconds

Without releasing Power, also press Home for 10 seconds

Without releasing Home, release Power and keep pressing Home for another 15 seconds

7 Tutorial: how to jailbreak untethered to iOS 4.3.2 using Redsn0w


Your iPhone will restart

It will take a little longer than normal.

Once restarted you already have Cydia on your Springboard.

via | iClarified


Follow us on Google News

58 comments, leave yours

Leave a Comment

Your email address will not be published. Required fields are marked with *

*

*

  1. Responsible for the data: AB Internet Networks 2008 SL
  2. Purpose of the data: Control SPAM, comment management.
  3. Legitimation: Your consent
  4. Communication of the data: The data will not be communicated to third parties except by legal obligation.
  5. Data storage: Database hosted by Occentus Networks (EU)
  6. Rights: At any time you can limit, recover and delete your information.

  1.   Karlos said

    Has anyone done it already? It is safe??

  2.   tito said

    It goes perfectly. The only thing didn't work for me when I checked the bootlogo box, it started, but then the apple came out and nothing, but in the end everything was fine.
    Good tutorial.
    Thank you
    Salu2

  3.   iepa said

    It works OK.

    iPhone 3GS with old bootrom and 4.3.3 Jailbroken!

  4.   Alberto said

    Done on an iPhone 4 - 4.2.1 and without problems ... but ... one thing ... Can only multi-touch gestures be activated in the option that this tutorial says or is there another way? ... is that ... I forgot to mark it ... Is there another option?

    Thanks and regards!!

  5.   karlos said

    Yes now! but I had to do it twice because the first time the cydia logo did not react and I had to restore but now it works for me!

  6.   Joshua said

    I have problems with itunes .. it won't let me update and it won't let me download ios 4.3.3, I get an error that says that time has run out .. or to check the network settings .. I already tried removing the antivirus and Nothing, I also uninstalled and reinstalled itunes and I get the same error ... also when the jail with the redsnow something, when the jail starts to do I get an error that tells me that redsnow stopped working and closes .. (I also tried opening redsnow in administrator mode and nothing) I have an iphone 4, my operating system is windows vista .. I would appreciate your help .. I currently have the jail on ios 4.3.2 but thanks to these problems I cannot update and much less do the jail with 4.3.3 .. thanks in advance

  7.   javielaco said

    I know I'm a win, but can someone tell me which box is for multi-touch gestures?
    please ...

  8.   Karlos said

    Josué Try to jailbreak on another computer something similar happened to me because itunes did not want to download the update of 4.3.3 but I already happened in 4.3.2 I do not know why it is but I did it on another computer and this is it later you synchronize them with yours.

  9.   Fran said

    Everything correct as always with these tutorials. I only do it once I have activated the multitactiles, then I'm trying to run them and they won't work ...

  10.   Eduardo said

    Hello how are you, greetings.
    I have a problem I want to update to 4.3.3 and I get an error (3194) and I have version 4.3.2, it is legal, the iphone is a 3GS, and I have it with the jailbreak.
    Someone would know why that happens, I tried it on 3 different computers and it gives me the same error.
    I hope you can help me, thank you very much.
    Greetings.

  11.   Pablo said

    iPhone 3GS bootrom a new jailbreak attempt and now cydia is blank and when I want to enter it returns to the home screen. I already passed the redswnow like 5 times. some help?

  12.   rules_cs said

    Hello there!
    I do not get the .ipsw file in the ios 4.3.3 that I download so the RedSn0w does not read any firmware! Someone else happens??? I have tried to download it from other sites and I always get files with .dmg extensions. Does anyone know where I can download the .ipsw from a site that downloads well ???

  13.   only said

    Rulas_cs the problem is with the browser, the same thing happened to me with internet explorer, try to download it with mozilla firefox you will see how it reads it to you

  14.   Fede said

    Hi there! Could someone tell me how the drums are doing with this new firm?
    Thank you!

  15.   Martin. said

    Those who have problem with the error code 3194, have to put the iPhone in DFU mode with the combination of Power and Home buttons and then connect to the PC, then run iTunes. So force iTunes to restore.

    I hope my contribution is useful to you.

    Greetings.

  16.   totidity said

    Well, after doing it, everything works except the ipod,
    Do you know why it can be?

  17.   Alf16 said

    There is no way, it is the first time that I have problems. With I4, I go up to 433 perfectly, I run redsn0w as usual, I select the downloaded fir 433, and when it jumps to FIRST STEP… it takes a long time without advancing and I get an error, but without a number. Leave the I4 in dfu, take it out with the Tinyumbrella (fix) and go back to start. I'm telling you, impossible. As I have it free I will test the Sn0wbreeze with a custom.

  18.   Joshua said

    Thanks Karlos .. on my computer you can't .. on another laptop in my house you can't either… well see if I try at a friend's house or something… thanks Karlos!

  19.   rhodologik said

    hello everyone .. a week ago I started to jailbreak .. some 4g ipods ... and everything is fine .. but when I did it with mine .. I did it with redsnow yyy firmware 4.3.3 won't let me do it .. I could not do it but if with firmware 4.3 and everything is fine except something ... the ipod does not turn off or turn on as it normally would ... as we always try to improve every day ... and let's give constructive comments please ...

  20.   delars said

    I'm going to try it, see how it goes.

  21.   rules_cs said

    Thanks Kun !!! with firefox I downloaded well!

  22.   delars said

    Done, everything ok. Just a problem restoring the backup, but it was fixed by restarting my pc.

    Another thing, if someone knows of an application for, like PKGBackup does with Cydia applications, put the purchased applications back in the AppStore, let him say so, because I have many and it is a pain to install them and put everything as I had .

    Thank you.

  23.   Borjo said

    I have the 4.3.1 with jailbreak and the BB 04.10.01. Two questions.
    -Can it be released with PwnageTool?
    -Can I upgrade from 4.3.1 to 4.3.3 with redsn0w without any problem?

  24.   July said

    A basic question ... in the first step of the tutorial it says that:

    "Restore your iPhone normally from iTunes."

    My question is: why do I have to do this if then with redsn0w I load the firm 4.3.3 again?

    Thank you.

  25.   gnzl said

    Redsnow does not install the firmware, it only jailbreaks it
    You have to update it before

  26.   July said

    Thank you very much for answering Gnzl, so what I don't understand is why it says to download iOS 4.3.3 from getios.com.

  27.   gnzl said

    Well, because most of them are not able to find it on their system if they have downloaded it with iTunes and it is easier to download it again.

  28.   Lolo said

    Hello, I have been reading all the comments and I am going to decide to do the jail at 4.3.3. I still have it with version 4.2.1 of greenpoison. Can anyone tell me if this 4.3.3 jailbreak version with redsnow r_16 is stable? and if it is better than the one I have with 4.2.1 in battery life and other aspects, bugs, ...
    Thanks in advance and congratulations to all who make this blog possible, since without it many people would be more lost than Wally in Vicente Calderon

  29.   German said

    Hi there! I have a little problem if someone can solve it for me ... I jailbroken the iphone 4 on ios 4.3.3 and everything is fine, the only thing that the installous does not work for me when I want to give any application I get API error Permission denied ... from where Could that be the fault? Because I have installed and uninstalled it a lot of times and nothing and I have also tried to do it from other repos and neither

  30.   alex said

    NOTIFICATIONS SOLUTION
    My problem has been when putting the iTunes restoration.
    With the iphone restored to 0 then the JB done the perfect notifications worked. Then I put the itunes backup and it no longer worked for me.
    So I did not put the backup copy and ready to put the programs and everything by hand.
    I hope it is worth it

  31.   alex said

    German
    You have to install the appsyn in cydia
    The one that works for 4.3.3 is the one that puts appsync 4.0+
    You can download it from the iphoneate or xsellize repo

  32.   Jon said

    Made on Iphone 4 - 4.3.3 without problems ..

    Even so, I try with 3Gs and I can't, when I put the DFU it stays in the cable image and Itunes, the new or old bootroom warning does not appear either .. It is in SP3 mode, it recognizes the IOS but still it doesn't work .. Any recommendation or reason why it doesn't work .. please ...

  33.   German said

    I already had it installed too ... Thank you very much anyway

  34.   Jose Carlos said

    Hi, I have a problem, I have jail 4.3.3 and Cydia comes out blank and won't run. What to do, thank you.

  35.   Chris v said

    Hello friends I have a legal iPhone 4 in Movistar Venezuela. I updated to 4.3.3 and I did JB with redsn0w and now the whatsapp is disconnected and notifications do not arrive. Anyone with this problem. I think the rest works perfectly. Thanks

  36.   dartthnewbie said

    The same thing happened to me as to Rulas_cs using Internet Explorer, I tried Safari and the problem was corrected, it identifies the complete file as the firmware.

    regards

  37.   Cristina said

    Hello everyone ... I have done the jailbreak perfectly, the only thing that now I am isolated, because the operator or the network does not recognize me ... I need urgent help !!!!!!

  38.   udaeta said

    Hello everyone, there is one thing that I do not understand, at the beginning of the tutorial it says that you have to restore first (which means that I have to update the iphone to the original 4.3.3, this can be done with the mobile already made the jail .) Another of my doubts is that I have already done the jail without having restored and in the information of the iphone it tells me that it is in 4.3.1, this because and finally the issue of multi-touch gestures, do they work? because I do not see any new option in settings, I hope you help me
    greetings to all

  39.   Juan said

    How long does the final reboot step take? I've been waiting half an hour and my iphone is blank

    Thank you

  40.   Ceci said

    I have an iphone 3GS BB 6.15.00 with firm 4.1 I have not been able to scale it since I put the BB 6.15.00, I want to change it to 4.3.3 I use the PwnageTool and when restoring it shows error 21 and leaves it with the arrow and the itunes logo, it has not let me upload the firmware that I am doing wrong, can someone help me please

  41.   iP4 said

    Cristina, remove the pin from the SIM, restore it, do the JB, and then if you want, you can put the pin back on it. It has been solved like this for me and people I know that have happened to them.

  42.   Luisz B. said

    One question I have an iPhone 3GS with 4.2.1 when I restore it says that everything will be erased and that if I installed the latest version of software (4.3.5), will this happen automatically or will it be saved in 4.2.1?

  43.   alexis said

    Hello I would like to ask you a question, I have a new vodafone iphone 4, still unopened and nothing else will be. I want to jailbreak it. What being from vodafone I don't know what program to use «Sn0wbreeze or PwnageTool» or «RedSn0w» for that reason of the baseband ... I will do it from a pc with windows xp, I hope to answer a greeting and thanks in advance 😉

    1.    gnzl said

      Alexis, before doing the jailbreak you must inform yourself very well about what the baseband is and what it is for, so you will know that you do not care, what are the shsh, what version of firmware you have, etc.
      Do not venture without knowing what you are doing.

      1.    alexis said

        Hello Gnzi, first of all thanks for answering, I've been looking at the baseband but I'm not interested in touching that, I just want to jailbreak version 4.3.5, which is the last one (correct me if I'm wrong), it's the first iPhone that I have and I am very new to this, I hope any advice I would appreciate it, thank you !!

        1.    gnzl said

          If your iPhone comes with 4.3.5 (I suppose it won't, it will come with 4.3.3 surely) I recommend you not to jailbreak, since it is tethered and nobody wants an iPhone that cannot be turned off.
          Why do you want to jailbreak so fast, do you need something expressly?

          1.    alexis said

            That is why the applications… what do you recommend? If I came with 4.3.3 what jailbreak would I have to do, thanks again for answering, greetings

  44.   gnzl said

    4.3.3 jailbreak me
    I hope you talk about cydia applications because if you talk about hacking we are against it.

    1.    alexis said

      Yes, it would be from cidya, I hope a greeting response

      1.    gnzl said

        I said, jailbreak me, nothing easier.

  45.   alexis said

    sorry for the ignorance but what is that about jailbreakme, thanks

    1.    gnzl said

      that's where google comes into play!
      It is a page that makes you jail in 4.3.3

  46.   alexis said

    One question then, what is the difference between jailbreakme (which is very easy from what I have looked at) and the jailbreak that you previously recommended not to do, and another question is 4.3.3 the latest current version? Thank you

    1.    gnzl said

      You have a lot to read, the difference is that one is tethered and the other is untethered, and you don't want the first one.
      All that information can be easily found on the web. I can not solve all your doubts, I hope you understand.

  47.   alexis said

    I understand, more things that you have already clarified for me ... Thank you very much uncle I will start looking for information, thanks again! regards!

  48.   dani said

    Hello everyone, I have an iPhone in version 4,3,3 and I want to jailbreak it, what happens is it tells me that I have to restore it and I go to iTunes to restore it but it does not let me only restore, it tells me that in addition to restoring I have that update it to 4.3.5 and that one no longer has jailbreak, can someone help me ??? thanks

    1.    David said

      hello how are you ... I had the same doubt as you @dani however if you check on your iphone the version which in my case is 4.3.3 (8j2) you would only have to do the redsnow procedure, it is not necessary to update it, that is if you have to download the firm to use it with redsnow but if your cell already has it you don't need to restore it.

  49.   rocko said

    Wave zoi new in the iPhone'z and ipad'z ezto i komo todoz I have muxaz doubts kon regarding the jailbreak komo for example when jailbreaking the iphone are lost the data that was previously installed?
    How does this change affect the iPhone?
    During the release process, can an error occur that damages the iPhone?
    I have a lot of doubts that someone would guide me, ma laz aklarara, zi no ai inkobeniente, can anyone rezp my korreo? Ze loz would be infinitely grateful and I would lose the ignorance