Tutorial to jailbreak untethered iOS 8.1.2-8.4

jailbreak-IOS-83

A few minutes ago has released the jailbreak for iOS 8.3 and we already have a tutorial prepared so that you can install it on your iPhone, iPod and iPad. The procedure is simple but, since it is all in Chinese and I suppose that no one of our readers understands it, you have to take a step before you get it. hatches (A greeting and thanks again).

How to jailbreak iOS 8.3

Recommendations

  • It is always advisable to make a backup copy of your device to avoid possible loss of information.
  • Do a clean restore to avoid potential glitches.
  • You need to deactivate the unlock code (and Touch ID, if you have it) and the “Find my iPhone” service.
  • If you get the "Storage almost full" message, run Cydia.
  • If the jailbreak fails, turn off the WiFi and try again.

Compatible devices

  • iPhone 6, iPhone 6 Plus, iPhone 5s, iPhone 5c, iPhone 5 and iPhone 4s
  • iPad Air 2, iPad mini 3, iPad Air, iPad 4, iPad 3 and iPad 2
  • iPad mini 1 (1st generation iPad mini), iPad mini 2 (Retina iPad mini), iPad mini 3
  • 5th generation iPod touch

Steps to take

  1. We download and unzip the jailbreak from HERE.
  2. We connect our iPhone to the computer. We will see that we recognize it.
  3. We uncheck the popcorn below.
  4. We touch the green button.
  5. We wait.

taig-jailbreak_1

taig-jailbreak-2

taig-jailbrak-3

test-jailbreak

For those of you who have the betas of iOS 8.4 and iOS 9 installed, as Apple is signing iOS 8.3 and will not stop doing it until, probably, an hour after the public launch of iOs 8.4, you can downgrade without problems. To do this, it is best that you follow the tutorial of my colleague Cristina from How to downgrade from iOS 9 beta to iOS 8.3.


AirDrop for Windows, the best alternative
You are interested in:
How to use AirDrop on Windows PC
Follow us on Google News

84 comments, leave yours

Leave a Comment

Your email address will not be published. Required fields are marked with *

*

*

  1. Responsible for the data: AB Internet Networks 2008 SL
  2. Purpose of the data: Control SPAM, comment management.
  3. Legitimation: Your consent
  4. Communication of the data: The data will not be communicated to third parties except by legal obligation.
  5. Data storage: Database hosted by Occentus Networks (EU)
  6. Rights: At any time you can limit, recover and delete your information.

  1.   Edu said

    IT DOESN'T WORK DON'T DOWNLOAD IT IT'S A WASTE OF TIME THESE PEOPLE ARE ONLY TO FUCK US. WHEN IT REALLY LEAVES OFFICIAL WE WILL ALL FIND OUT. THIS IS 100% FALSE (TESTED). Greetings

    1.    hatches said

      Checked? Which is your twitter? I pass you catches? Come to my house I'll show you the iPhone if you want.

    2.    Charles J. said

      Find out before saying nonsense. Try to restore the iPhone from 0 with iOS 8.3 and try again, you'll see how it works….

  2.   XAM file said

    It doesn't work for me, it always stays at 20%

  3.   Edu said

    @bueymc is my Twitter luke. If you tried it, I would like to see it because it did not work for many people or, as many say, it remains at 20% and from there it does not progress further. So if you could show me it would be a great help. Greetings

  4.   Rafael Pazos said

    they are given at 20% because I think you have to remove icloud, remove the password. put it in airplane mode and put the day of June that I do not remember, and the time, that's why they have it, I remember that I did this, in ios 8.1.2 with taig, greetings!

  5.   KYKEGUASS said

    It has worked perfectly for me deactivating the search for my iphone, touch id and the unlock code!

    1.    cyanise said

      for all those who make mistakes; both driver and 20% ... delete itunes, completely. all apple programs. go to my music and in the iTunes folder, change the extension of the ituneslibrary.idl file to ituneslibrary.bak ...
      You restart your PC, download version 12.0.1 of itunes from here:https://secure-appldnld.apple.com/iTunes12/031-08058.20141016.34epp/iTunesSetup.exe
      you install it and I should let you

  6.   Jose Crisanto Morillon Perez said

    It is in English too http://taig.com/en/

  7.   Henry Joseph said

    It has also worked for me without problems !!! 🙂 Now wait for compatible tweaks to come out!

  8.   Marcelo said

    It is stuck at 20% (I deactivated everything) and nothing !!

  9.   XAM file said

    I'm still the same, everything that has been said is deactivated but nanai stays at 20%

  10.   Paul said

    It worked for me, deactivating search for iphone, code and fingerprint

  11.   XAM file said

    Well, I have deactivated all that and it remains at 20%

  12.   Daniel said

    If they have 20/30% left it is because they updated OTA, so they should backup and update ...
    that should work.

    1.    Juan Fco Carretero (@ Juan_Fran_88) said

      I just restored it via iTunes and it remains at 20%, that is, the reason is not because of the update via OTA and I tried 3 times and it always remains at 20%, more specifically, it remains blocked in the restart step , restart the terminal over and over again

  13.   Pablo said

    Anyway, it stays at 20%, I have already deactivated everything and nothing does not work. How is it solved?

  14.   Gabriel Marquez SiinMaas said

    saurik has to update ...

  15.   XAM file said

    I have restored with ios 8.3 through Itunes and it does not have to look for iphone or code or fingerprint and it still remains at 20%

  16.   Jesus said

    Today is my birthday (I am 20) and what a gift these Chinese bring me, it works perfectly I hope the packages are updated! Thanks a lot!!!!!

  17.   Christian gutierrez said

    Don't waste your time with this… It doesn't work!

    (If you follow the link in the photo, it takes you to a Chinese page.)

    1.    xylan said

      seriously ????

    2.    Charles J. said

      You don't know where Taig's are from, do you? XD

    3.    Ramon L. said

      You don't know where the jailbreak is from, right? XD

    4.    Luis Xaviêr said

      Because the tool is Chinese, genius.

  18.   Borja said

    There is a fault with 64-bit computers, that's why we are caught in 20%. In 32-bit computers it works

  19.   Manny said

    it stays at 20%

  20.   Adrian Otero Rifat said

    I'm on 8.1 and I'm going to update to 8.3 now that JB is out before 8.4 is out.

  21.   Alen said

    Nothing at all works for me, the truth is, I think it is a strategy to speed up the exit of ios 8.4 because the truth does not work, I do not pass 20%, I restored it again to see if with something clean if I did it but nothing does not work don't suck. not funcaaaaaaaa do not waste efforts not funnncaaaaaa. forgive the page hahahaha!

    1.    Paul E said

      Alen download the version of Itunes 12.1.0 and voila, it works 100%. Check the post before this one, someone named Cristhian pointed it out and it works it safe

      1.    edward mendez said

        Friend I don't know if I should do it as they just released it today I am in doubt tell me what I am afraid to do to download it (each step to avoid inconveniences) and thank you

  22.   Jean michael rodriguez said

    I can install it on Win 7 64bit but for some reason the itune drivers did not recognize me in the latest version. I had to uninstall the latest version of itunes and install version 12.0.1. The same I had to do in the past version of TaiG (iOS 8.1.3). But after all normal, I just had to deactivate the lock code and find my ipad and that's it. Installed on an iPad mini 1

    1.    Diego said

      Hi Jean, where could you download iTunes 12.0.1?

  23.   iphone max said

    At the moment I'm still on 8.1.2 with my super stable jailbreak. I don't want to screw it up. Besides that applications like Semirestore are not prepared either. You have to wait for everything to be made official and go 100% well or then regrets come.

  24.   Daniel Orlando Zapata said

    That Chinese page means that you have the latest iTunes and you must download a previous version and on that page it gives you two iTunes options for 32-bit pc and the other for 64 with the latest iTunes does not work

  25.   Daniel Orlando Zapata said

    That Chinese page means that you have the latest iTunes and you must download a previous version and on that page it gives you two iTunes options for 32-bit pc and the other for 64 with the latest iTunes does not work

  26.   Talion said

    Thanks a lot. On my iPhone 6 refurbished with ios 8.3 I had the 20% loop problem. I tried on another PC by installing the 32-bit iTunes from step 2 and it worked without a problem.

  27.   knot said

    It's all the same, everything is the same, only you have to do it with the version of itunes 12.0.1 right now I did it and clear

  28.   José said

    So his right now would be to install iOS 8.3 because I have iOS 8.1.2, and wait for cydia to work correctly, right? Or if ios 8.4 comes out and I have iOS 8.1.2 I will not be able to jailbreak or there is some way to do it through an ipa file of iOS 8.3 .. Someone could inform me if I could do it like this, if I do not restore and upload to iOS 8.3

    1.    Jean michael rodriguez said

      Restore now to iOS 8.3 and do Jailbrake. When you already have cydia installed, as they update they will update you too. If ios 8.4 comes out and they close the exploit, you will already be in ios 8.3 with cydia, that is, you will not have problems.

  29.   Anonymous said

    The same thing happens to me as Christian Gutierrez, what can be done ????

  30.   rafael said

    I have tried each of the itunes that they have published and nothing, first I solved the issue of the drivers, but now it restarts again and again at 20% and it does not happen from there it throws me after a while the error 1101 I think

  31.   Daniel Iglesias-Meyer said

    I installed it a few hours ago and it is going great, no problem, iphone 5s

  32.   daniloveyou said

    Do you know when it will come out for mac?

  33.   momo said

    I am going one hundred percent luxury with windows 8.1 32 on iphone 5s you just have to install the previous itunes graceaaaaasssss

  34.   Julian Morales said

    Luis Miguel Morales placeholder image

  35.   Ricky said

    Works sharp on an Iphone 4s .. Excellent !!!

  36.   Suzanne said

    It worked for me, but now I have a blank settings screen, what can I do?
    iphone 6 plus

  37.   Suzanne said

    That is, the settings do not come out, I click the screen and it is blank. please some help

  38.   Damian said

    Who already has Jailbreak running, what tweaks do they have? 🙂

  39.   alvao said

    I put the tool and it does not detect my iphone and deactivate all touch id and code what do I do?

  40.   london said

    It stays at 20% because you have to uninstall iTunes and download a lower version, I did it and it worked for me, but hey, the jailbreak is installed but it doesn't work until they update the cydiasubstrate as they say

  41.   Juan said

    hello, for all those who are waiting for an update from saurik, there will not be, it says that it is taiG who should patch the kernel to solve the problems with mobile substrate,

  42.   Juan said

    Could someone explain to me what Cydia Substrate is, is it the same as cydia?

  43.   Diego said

    It worked for me with iTunes 12.0.1, with the current version I had a problem with drivers and with version 12.1.0 it stayed at 20%

  44.   santos molina said

    It has also given me errors, so I will try with the ipad mni clean with 8.3 and I am sure that it will be able ... as always. better restore, jailbreak and install the backup

  45.   chic said

    Hello. I installed it by downloading the itunes version. And asked?? I have several programs on the PC such as tomtom, to transfer it to the iphone can it be done? is that it gives me an error

    To be able to pass the programs, the only way is to have the Appsync?

    Thank you

  46.   CADAN said

    After venturing to perform the jailbreak tell you that I have been able to do it on all my devices (iPhone and iPad) without problems and the first time it has been fast, now it is time to update the cydia substrate and run.
    P.S. I did it with an imac with boot camp and win 8.1

  47.   jovanni said

    I can't do it, I get a message that I must install something in iTunes, please help !!!

  48.   Raul said

    Does anyone think that they cannot install anything from the app store? I have jailbroken and then it won't let me install or update

  49.   Raul said

    It's already solved, it was a cydia tweak

  50.   SergioV said

    For those who fail and stay at 20%, check the security part. Take everything away, including the "simple code." After that it worked for me.
    Try and you are saying, to see if that's what it is, that a lot of people are lost.

  51.   Xplertor said

    20% apple driver problem - solution Download version of Itunes.
    Immediately after the jailbreak, update ALL Cydia (it may be black screen and there is no other option but to restore everything)
    Then you have to enter Icloud account data to have the AppStore available (it does not serve only in the restoration or in the beginning)
    Everything at 100% although in the iFUNBOX I cannot activate the USB tunnel or enter the root of the system.

  52.   Juan said

    Ami the itune opens to me, I do not open the window to weigh the jailbreak that agoooooo helps

  53.   J Edward said

    It worked for me the first time, I just had to uninstall the latest iTunes, all Apple programs and change the iTunesLibrary extension. Then it will install version 12.0.1 and disable my anti virus.
    Turn off my Wifi, lock code and «Find my iPhone»
    Run the program as administrator and voila, it was perfect.
    Then I got the Cydia installer update to the latest one. So far I have only downloaded some tweaks that I saw on the internet compatible with iOS 8.3 although I would like to see if there are themes for this version because I cannot find them.

  54.   latostadorane said

    Too bad it's only for Windows!

  55.   Jesus said

    Hello, I have tried but my iphone 6 does not recognize me, it tells me that I do not have the drivers installed. I have installed itune 12.0.1 and then install the latest one and nothing. Do you know what it can be? I have tried on two computers and nothing, same answer.

  56.   John jairo jaramillo said

    It does NOT work in virtual machine paralles IN MAC if someone helps me better greetings from Spain

  57.   John jairo jaramillo said

    the virtual machine is windows 7

  58.   antonio said

    It consistently fails me at 60% I'm going to go back to restore and try again. That way they indicate that you have to put airplane mode. I have tried and it keeps failing me. It takes like 10 minutes to 60%

  59.   antonio said

    When updating do a clean restore. So if it works properly.

  60.   Dani said

    I did the jailbreak on the ipad and on the iphone 5s, in the latter when starting cydia I get an important update, I accept it, the springboard restarts and it hits the desktop of the mobile, nothing is seen, only the screen saver and It does not work, I go back to restore, do the jailbreak and put the backup copy last, the same thing, I have already been 3 times with the same, everything perfect on the ipad mini2. it happens to someone

  61.   john a. said

    Hi, I did the following with an iphone 5s and it worked perfectly. Very Simple: I closed Itunes and started to jailbreak according to the tutorial. He is going to stay at 60% for a long time but it doesn't matter, let him just come out. It took me at least an hour and a half to 2 hours to finish but you get the job done. Greetings

  62.   Alejandro said

    My device does not detect me, it says that because the apple driver is not found, what is that? That I have to do? please help.

    1.    Carlos said

      you have to download the newest version of itunes preferably 12.0.1 with this one going great

  63.   Juan said

    It happens to me the same as Alejandro

  64.   duck said

    The same error happens to me as the others .. the drivers do not recognize me, any help?

  65.   hudiny said

    If it works when it is blocked at 20, give it to remove the program but don't do it, you give the right button to go back and so on until 100, I have had to give it about 5 times.

  66.   Carlos said

    Hello everyone. I love it, everything worked well for me, only the substrate to update I did not understand it but it does not affect anything

  67.   Kyrin said

    Excuse me, what version of iTunes are you using to jailbreak? … Ami I get an alert about iTunes and it gives me a link!

  68.   aleg1422 said

    I did it without problems with iTunes 12.0.1.26, with the latest version I could not because it threw an error

  69.   Diego said

    Hello, from where can I download iTunes 12.0.1 ???

  70.   Luis said

    Greetings friends I have jailbreak in 8.4 it was working wonderfully out of nowhere cydia stopped me from opening any solution apart from restoring thanks

  71.   danuil said

    all disconnected, airplane mode and it stays at 50%
    what will it be ????