Video tutorial: Restore custom firmware with baseband 6.15 and activate with SAM (iPhone 3G)

Our reader Pedro has prepared us a couple of videos where you can see step by step how to restore your iPhone 3G with a custom firmware with baseband 6.15 to be able to release it later.

It also shows us how to deactivate it later and reactivate it with SAM to have the notifications working and not have the problem of battery consumption.

You will need:

IPhone 3G Firmware with baseband 6.15

(I have uploaded 4.2.1 and Pedro does it with 4.1, but it's the same)

Redsn0w

Windows

Mac

TinyUmbrella

Windows

Mac

http://www.youtube.com/watch?v=DNlxxofJyEA

http://www.youtube.com/watch?v=nJgp3Nf7na4


Follow us on Google News

169 comments, leave yours

Leave a Comment

Your email address will not be published. Required fields are marked with *

*

*

  1. Responsible for the data: AB Internet Networks 2008 SL
  2. Purpose of the data: Control SPAM, comment management.
  3. Legitimation: Your consent
  4. Communication of the data: The data will not be communicated to third parties except by legal obligation.
  5. Data storage: Database hosted by Occentus Networks (EU)
  6. Rights: At any time you can limit, recover and delete your information.

  1.   ierick11nov said

    Wow !! Congratulations Pedro, Much success and thank you for your valuable help, I have a 3GS these days I will risk following the tutorial and I will comment,

    Receive greetings from Canada

  2.   ik4ro said

    I imagine it would work the same way for the iPhone 3GS right? Just yesterday I installed a custom firmware 4.1 (I have baseband 6.15), and I noticed that the push notifications were not working, I have tried with the push fix but it does not fix it, so I suppose this will be the best method.

    Thanks for the tuto, I will try

  3.   ik4ro said

    I have already done the tutorial with my 3GS and it went well, it is already activated. The bad thing is that the notifications still do not skip, could it be because I already had the programs installed from before? I have tried deleting them and re-syncing them, but they still don't skip the notifications

    1.    gnzl said

      use SAMprefs to close open notification sessions

  4.   ik4ro said

    I suppose you mean settings-> SAM-> clear push sesions, I've done it a couple of times, restarting the phone and everything, I connect it to itunes as it tells me after activating the clear push sesions, but nothing, I still don't have any Push notifications, I have tried with the im + and the notification does not skip, and with the viber when I put my phone number I do not get the sms with the password. I'll keep messing around

    1.    gnzl said

      because you already bring them dragged ... the only solution is a pain in the ass ... restore and configure as a new iphone

  5.   jamskys said

    In the list of servers, which one should be chosen for a Movistar Spain, because all the South American Movistar appear but not the one from Spain ...

  6.   ik4ro said

    jamskys, my iphone 3GS is from movistar, and I have selected "Telefonica is" look for what is

  7.   leandro said

    The same thing happens to me as ik4ro, what can be done?

  8.   ik4ro said

    Lenadro I think that as Gnzl says it is best to restore and leave everything ready from zero, I am going to do it, since I restored it yesterday and I have it fresh. Then I'll tell you if it works for me after restoring or not

  9.   leandro said

    Okay! I'm going to wait for you to do it and see what happens. I am also downloading a custom to also try from scratch. I am already desperate that notifications do not go to me! Thank you!

  10.   Xavi said

    I have a 3GS and since I changed the baseband for the iPad to release it, it does not sync with iTunes. I can't install, no music or anything
    Any solution?

  11.   ik4ro said

    Damn, now after putting it in recovery mode, when I restore it, before starting it gives me error 21 and it won't let me ... now let's see how I can solve this ...

    1.    gnzl said

      ikaro:
      tiny umbrella
      kick out recovery mode

  12.   ik4ro said

    Thanks Gnzl, at the moment I got nervous and did not fall into doing that. I have already restored the iphone from 0 and followed the tutorial, apparently the PUSH notifications work, the ims + at least works (the viber still does not send me the sms with the activation code ¬¬).
    Thanks for the tuto and for all the help

  13.   ricardo said

    Ami I get this factoryactived means that it is already activated?
    and between msn from the other side and I got push notification to my iphone every time I wrote.
    And a long time ago I did not get the performance of the battery when I had used it for a long time but now it comes out .. 3 hr the time that I used it? It is activated

  14.   Andrew said

    is there any way to know which company is our iphone originally? because I bought it from a guy and I don't know which company to put it on when using sam .. please help me with some solution ..

  15.   Leandro said

    Thanks Pedro for the tutorial! Excellent! Now there are notifications! the tutorial had to be followed step by step! thank you Gnzl for helping us with every question! greetings to all current iPhone from Argentina!

  16.   xavier viteri said

    This video tutorial is also useful to do it with a mac?
    Please tell me that I want to solve this notifications once and for all!

  17.   xavier viteri said

    The second video is no longer available! Attention with that!

  18.   xavier viteri said

    Pedro or Gnzl if it is not annoying I need to confirm if when restoring it you used customFW from 4.1 or was it a FW restore 4.1?
    another query I have 4.2.1 both custome and retore which one do I use?
    I use the firmware of the ipad 3.2.2 in this tutorial?
    I want to clarify all my doubts I do not want to fuck my iphone !!
    Please someone give me a concrete answer !!!
    The second video has been surprised. You cannot do the complete tutorial because there is no second video!
    Thank you!

    1.    gnzl said

      use the 4.2.1 custom.
      I have contacted Pedro to resub the video

  19.   xavier viteri said

    THAT GROSO CRAZY !!
    THANKS!
    IT WORKS THE SAME WITH A MAC, JUST CHANGE THE SHIFT X THE OPTION AND THE REST IS THE SAME!
    THANK YOU!!!

  20.   jamskys said

    Fuck hell, when I give it to exit recovery mode, it keeps staying in recovery mode and I can't follow the steps from there ...

  21.   jamskys said

    Help pleaserrr. A charitable soul that tells me what happens, xq I give exit recovery and it does not start my iphone and it is still in recovery mode ...

    1.    gnzl said

      Try on another computer!

  22.   jamskys said

    I will try to see, but it would be strange, I have done everything related to the jailbreak on this computer ... I do it and I will tell you

  23.   xavier viteri said

    The video still does not play!
    Who can fix that, I can't go on without the second part

  24.   jamskys said

    Noooooooooo, it still doesn't work…. Right now my iPhone is again a paperweight xq ???? Please help from a desperate ... Please

  25.   xavier viteri said

    I'm going to leave my iphone like this, no push or anything!
    counted with the fingers of his hand they came out, PEDRO ALL BAD THE VIDEO DOES NOT WORK, PLEASE BE CARRIED!

  26.   toni said

    Where can I get a custom for the 3gs new boot?

  27.   Papu said

    I'm just like Jamskys. The phone does not exit recovery mode. It remains there in a loop that has no end.

    What do you recommend me to do?
    Thanks in advance!
    Greetings to all!

  28.   gnzl said

    Jamkys and papu
    I hope you are not in DFU loop
    Is it that you had a 3GS new bootrom in 3.1.3 with spirit?
    Have you tried umbrella, ireb and easyirecovery?

  29.   gnzl said

    The DFU loop has only come from Spirit. and ONLY in 3gs, so it can't be DFU loop (in your case)
    Try easyirecovery, you can find it on this page.

  30.   Papu said

    That's right gnzl. I am with a 3G that comes from its official operator (bare). I follow this tutorial and it stays in a DFU Loop. So far I have tried tinyumbrella and ireb with no luck. I'm going to see what happened with the program you mentioned.

    Thanks for the wave !!

    1.    gnzl said

      I already have the solution, it is not exactly DFU loop.
      It is impossible to restore to 4.2.1 if you have baseband 6.15
      you have to update to a 4.1 custom that only has cydia (do not press the option to install baseband on the iPad again)
      then if it will work.

  31.   Papu said

    Perfect gnzl, I'm going to try that.
    Can it be any custom 4.1 I find out there? I come from work and I try it.

    Thanks !!

  32.   Alvaro Pecino placeholder image said

    The second video does not go….

    Greetings.

  33.   jamskys said

    The tunyumbrella for the exit recovery still does not work, although I restore with a custom 4.1, I have tried with the two links that you have put and nothing ... This is very frustrating ...

  34.   jamskys said

    After testing with iREB ​​now the iPhone does not even turn on, this is incredible ... I don't know what to do, please if someone with a 3G that had 4.2.1 with baseband 6.15 and the same thing happened to me and I could fix it please tell me.

    Gnzl to see if you can help me

    1.    gnzl said

      Updated with the second video again.

  35.   Pablo said

    Another with loop here on an Iphone 3G, it seems that there is a mess.

  36.   jamskys said

    MY SOLUTION AT LAST

    I have an iPhone 3G and I enter the DFU loop. My solution was to restore with this custom firmware 4.1 that comes with:

    Cydia, Jailbreak and without uploading Baseband, Activated, normal without multitasking, without new option of wallpapers and without battery percentage. http://www.megaupload.com/?d=56HH8DMC

    With this custom I didn't even need the umbrella. It was perfectly restored. Then if I followed the steps to the letter and voila. iPhone 3G with iOS 4.1 hacktivated with baseband 6.15 and push working.

    I hope it serves the people

  37.   miguel angel said

    goodiiiiiisimo works perfect and without the error 1015 ... thanks men

  38.   pedro said

    Thanks to all of you who encouraged me to do the tutoring, and from what I see it serves you, that makes me happy !!!!

  39.   pedro said

    Jamskys what you have to do is take it out of DFU mode, press HOME plus POWER for 10 seconds or a little more and then release and press power and it will turn on normally

  40.   pedro said

    I remind you that it does not work with 4.2.1 or with 3g or 3gs I do not know the reason why it is not possible to get it out of recovery mode or with tiny or with ireb so use 4.1 that works 100%, it is more It seems to me faster than 4.2.1 in 3g ...

  41.   Atzumi said

    Well, I do the steps and the problem is that when I restart the iphone it is still in version 3.1.3 but without cydia nio nothing
    What can be? Can you think of something?
    By the way, Pedro, about removing the DFU that you put in "take it out of DFU mode, press HOME plus POWER for 10 seconds or a little more and then release and press the power and it will turn on normally." Good thing you put it on! Thank you
    To have if I can make it work, it seems that this method from what you say is the best one.

    Thanks to all

  42.   pedro said

    How strange, have you put the 4.1 custom ???? xq if you install everything you would have to start with 4.1 not with 3.1.3 except that you do not have the SHSH saved ... I put all the tricks so that people do not panic when they have a problem similar to mine !!!!

  43.   Raul said

    If I restore it with the jamskys custom from 4.2 it gives me a failure
    Have you restored from 4.1 ????

  44.   pedro said

    Raul do it with 4.1 that does not give problems !!!!!

  45.   Jesus said

    but you do not teach how to install sam ... ..and another question with that error that appears in itunes when we install our firmware we will not have problems with the functions of our iphone ...

  46.   George said

    I have many doubts I was encouraged to restore it because I feel very slow since I put the 4.2.1 and when I get to the step of the error I use the tinyumbrella and nothing does nothing could you help me a little please.
    And another question when I updated my iPhone a friend told me that my firmware was not updated and that this would give me too many slowness problems, is this true ?????

  47.   pedro said

    Jorge, what iphone do you have 3gs or 3g?

  48.   Richard said

    Hello friends, I installed Firmware 4.1 and I also did Jailbreak, install Baseband 6.15.00, everything went well, it does not give me a problem with the battery or with gps. Everything works ok I can restore previous firmware eg: 3.1.2. 3.1.3. 4.0 ect but it does not let me install firmware 4.2.1 when trying, it gives me error 1015 but I get it with the program but it appears again and I get it again ect I can not install firmware 4.2.1 but the other zero drama that would be my question how to install 4.2.1 is more fluid than 4.1

  49.   pedro said

    The same thing happened with my 3gs, what I did was enter DFU with redsn0w, select that option (I don't remember what it is called exactly) something from DFU MODE, and let it load then I just put the custom 4.2.1 on it and it went wonders, I did not get any error not even the 1015 …… see try like this and how are you doing !!!

  50.   Luis said

    How about I have a problem after running tinyumbrella, it's still the same, I can't get it out of recovery mode, what can I do? I'm desperate

  51.   pedro said

    Luis uses custom 4.1 and 4.2 has that problem !!!!!!! use the qt I say ok the 4.1 !!!!!

  52.   Sebastian said

    Hello. I have the 3gs, and as the video says before doing everything, I have to pass the iReb to it, but I downloaded the iH8sn0w - iREB ​​V3.1-3 For Windows and I think it asks me to pay, how can I pass the iReb to my iphon without to pay? I need to unlock it and the BLACKRA1N didn't work for me either.
    I hope you can help me.
    Thank you!

    1.    gnzl said

      Ireb is free and always will be
      Search because here on the page we have put links

  53.   Sebastian said

    Okay! But when I run it, it asks me to enter a 16-digit code that I don't know where to get it from, where do I get it from? Thanks for your help!

  54.   Soledad said

    One question, if my iphone says it has a firmware modem 05.11.07 which baseband does it have? to see if this tutorial works for me

  55.   Soledad said

    One question, if my iphone says it has a firmware modem 05.11.07 which baseband does it have? to see if this tutorial works for me (it goes again because I put the e-mail wrong)

    1.    gnzl said

      That's the baseband loneliness

  56.   Luis Gerardo said

    Thank you very much Pedro I managed to get it out of recovery mode with tyniumbrella, I am really very happy I put version 4.1 on it and based on 06.15 ... I just feel that it downloads very fast, I don't know if it is because it is already used or it was the baseban. ? will anyone know? it is a 3g of 8 gigs

  57.   pedro said

    Luis Gerardo, you're welcome ... from what you tell me, you have only done the restoration but not the SAM !!! I also have a 3g of 8gb I did my tutorial and the battery is good for me, it lasts the whole day without having activated the wifi in vain, also deactivate the bluetooth, the mobile data and what is the 3g ... the battery is doing very well for me it lasts as always !!! Look carefully if it really does not last long or maybe they are ideas that I also did, but if you have done the SAM, there is no more to do, it is as if you activated it with an original SIM from the cell phone, I hope I have helped you, write any questions ….luck!!!!

  58.   Luis Gerardo said

    How about Pedro, thank you very much for answering.

    I tell you how I have activated the wifi or bluethood, only that with my telephone company Telcel I have activated an unlimited 3G GPRS data plan and then I practically have it connected the day and I am using it and it lasts about 4 hours, is it normal? or flat out if it is better to do everything with the SAM

  59.   pedro said

    luis Gerardo look at the truth I have not tried with a data plan, but I can give you an idea, I have a friend with the 3g with unlimited internet in movistar, and the battery lasts almost the whole day that he goes out to work, that is, his work lasts 8 hours a day and it lasts for that time, but he installed a cydia app in which when the phone is blocked the data network is disconnected (only when the iphone is blocked) and that is why it lasts…. .Here on the page I seemed to have seen it a while ago but I do not remember what the name of that app is, it is just an idea that I give you, I would lie to you if I told you that if it was normal or not ... since I only use wifi because my contract I'm done !!!! I use it all day with the wifi on at home, and it lasts almost a clear day without using it much (with wifi activated) I hope I have helped you with something, and a thousand apologies for not being able to specifically answer your question, Good luck!

  60.   George said

    I put the 4.2.1 on it, it felt very slow and that is why I restored it to 4.1 but it did not solve the problem, there are times that I am in msn and it is stunned leaving the application and well it is not with the unika that happens my firmware is 6.15 or something like that has something to do with ???????

  61.   Victor said

    Hi all,
    1) The news refers to:
    (I have uploaded 4.2.1 and Pedro does it with 4.1, but it's the same) and I have read in Pedro's comments that it is better to do it with 4.1,
    Do you have the download link for firmware 4.1?

  62.   pedro said

    Jorge, that's because of the firmware, leave it at 4.1 and you will see that it goes faster….

  63.   pedro said

    Victor, if you want 4.1, double click on the video to open YouTube, and you will find it in the description! luck!

  64.   Luis Gerardo said

    How about Pedro, I finally put the sam on it and I got it soaked and it doesn't heat up anymore and if the battery lasts a little longer, not so wooo but a little more, just that the notifications never worked for me, I don't know if I did something wrong or flat will not activate them.

    But from now on, thank you very much for your response and the attention paid to my post.

    Greetings.

  65.   pedro said

    Luis Gerardo, how are you, what good that you have done well, with the notifications it is simple, I caught myself the second time I restored !! What if you have to do is activate the iphone and not put any backup before doing the sam and activate it xq if you put an appa the notifications will not work! It is preferable that you do what I did in the video ... you do everything and then you install an instant messaging app, the ebuddy for example and try like this! if it goes you can synchronize everything !!!! Luck!

  66.   Luis Gerardo said

    Ok if it could be because when I restored it and activated it with SAM I already had applications installed such as msn and others, so do you also think that now because I had applications the SAM was not installed well as the duration of the battery?

    and how do I delete the backup copies of my laptop?

    Greetings and thanks

  67.   George said

    In fact, that's why I restored it to 4.1 but my iphone is still very slow, the same if there is any idea that you could give me to help a poko kon this thanks

  68.   pedro said

    Luis Gerardo and maybe that's why the notifications don't work for you… .just do everything from the post but in iTunes when you restore backup or configure it as new, leave it there and don't do anything… .do the SAM thing (install it) then the redsn0w deactivate it) and finally select your original carrier in the SAM and there you will just use itunes and when it says on the iPhone IPHONE ACTIVATED you can select RESTORE BACKUP COPY or if you like CONFIGURE AS NEW .... Good luck

  69.   PEDRO said

    Jorge, if your iPhone is a 3g ps it will continue to be slow, try not to restore backup copies and leave it clean ... in 3gs everything goes more fluid there is no difference but in 3g yes !! Everything is slower, so you have to get used to that, since my 3gs did everything to make it fast but still somewhat slow !!!!! Good luck!

  70.   MArc said

    I have an iPhone 3G, I have followed the steps of those videos and the first video has turned out well the first time, but when I did the second video, the phone started to work very slowly, until at the end the phone did not I see nothing more than the synchronization screen, the cable with the iTunes logo, even if it is disconnected from the PC,
    Can someone give me help on that?

  71.   pedro said

    MARc that is because you have deactivated before installing the SAM, you have to install the SAM and then just deactivate it with redsn0w, that is why you only get emergency calls (in the background the cable with the iTunes icon)

  72.   MArc said

    No no .. it's not that screen ... when I turn on the phone I get the apple screen for a few seconds and then I get the black background screen where the usb cable comes out with the arrow towards the iTunes icon, like when you connect the usb to the phone ... but I ALWAYS get that screen, whether or not the phone is connected to the PC, and in a few seconds the phone turns off, I don't get anything else that ... I tried the tyniumbrella to see if I could do something with it. nothing..
    Do you have any idea what I could do?

  73.   pedro said

    MARc you have the solution by putting the custom 4.1, the 4.2.1 has compatibility problems with the baseband 6.15 so it never leaves the recovery mode, double click on the video and it will open the youtube and in the description you will find the custom 4.1, good luck! !!!!

  74.   MArc said

    Thanks Pedro, if so I get it without me making any mistake ... I try it and I'll explain it to you.

  75.   MArc said

    Nothing .. I have tried to put the 4.1 and without success .. before I finish loading it I get the error 1015, the same thing happens as always, and the screen that of the USB cable keeps coming out with the arrow towards the iTunes icon ...

    Do you have any more ideas? Is there a way to erase everything and put everything back?

  76.   MArc said

    CLEVER!!!! I finally got it! thank you very much to all..!

  77.   pedro said

    MARC after ios 4.1 custom you should have used the tinyumbrella to get it out of the recovery mode !!!! Well, it has already worked for you, good luck!

  78.   lopez_ylm said

    Hello and greetings to all, to see if you can help me… .. 🙁 I have an iphone 3g
    I have tried to do it, but after installing custom 4.1, I can't connect to the internet via wifi, I get the symbol that it is connected to the network but it doesn't open cdydia or safari, so I can't install the next step, which is the ustrasn0w ...

    Some help?

  79.   pedro said

    lopez_ylm change wifi network and test !!!

  80.   lopez_ylm said

    Thanks Pedro .. after rebooting several times the router unlocked ... what a scare. everything solved and perfectly installed.
    Thank you for what you do .. is to keep in mind.

    regards

  81.   pedro said

    lopez_ylm, no good that it has worked for you Good luck I am to help!

  82.   manuel said

    Good morning, excuse the question, can you download a custom firm such as 3.1.2? or can only the same firm be restored? I would like to be able to lower it to 3.1.2

    1.    gnzl said

      If it can be downloaded, on this page you have tutorials
      Search for downgrade

  83.   Sebastian said

    One question, can I do this process if I have baseband 05.11.07? out there you can with a lower one but not a higher one.

    Thank you!

  84.   omar said

    Excuse me bro and what do I do if I don't know which is the original company of my iphone?

  85.   Hector said

    Hello, what if I don't know the original operator of my iphone, how do I choose which operator it is, how do I find that information?

  86.   pedro said

    put it in AUTO DETECT if it does not come out ps you are unlucky because you must put the original operator !!!

  87.   patrician said

    It worked after using various options. I used Itunes 10, restored with custom firmware and in cydia I entered http / repo666.ultrasn0w.com and installed and it finally worked after many failed attempts.
    Thanks Total….

  88.   pedro said

    Patricio I'm glad it worked for you! Luck!

  89.   ronald said

    It appears in the list of entel companies in Chile.
    Thank you

  90.   Jackie said

    Hello, I hope you can help me, I do the restore, I get the error 1015 I give it ok, I open> TinyUmbrella and I put exit recovery ... but it leaves me again with the itunes icon and the cable .... I want to dierrr… .. what do I do ??? Help please !!!

  91.   pedro said

    Jackie you are using 4.2.1 right? It is because that comes out like this, you have to use 4.1, or in any case double click on the video and check out my other videos that there are for 3gs Good luck!

  92.   Rodrigo said

    Hello,
    I restored my iPhone 3G with the custom firmware that I downloaded on this site, error 1015 occurs when I finish restoring, I use TinyUmbrella to exit Recovery Mode and it recognizes my iPhone, but with a (?), I press exit Recovery, it restarts , but it stays in Recovery Mode, what do I do? Thanks a lot!

  93.   mario said

    Peedroo, I need your help. I don't know what I see on the iPhone, and all the applications have been erased, that come with the iPhone and the screen comes out with the pure background of the screen with nothing else and I tried to restore it through iTunes and it doesn't happen. nothing everything is still iwal, how can I do it to restore it again. help me pliss

  94.   mario said

    aahh I have an iphone 3gs with software version 4.3

  95.   pedro said

    Mario send me a private to my youtub channel, double click on the video and it will open my channel! there I help you!

  96.   kukin said

    Hi Pedro, I restored the iPhone and I got the error 1015. Then I give the tinyumbrella to exit the recovery but it restarts all the time in recovery. what could it be? I have been trying to correct it for several days and there is no way please help me! Thanks in advance!

  97.   pedro said

    which iphone do you have 3gs? or 3g? If you have 3g use firmware 4.1 there if it works but if you want 4.2.1 use sn0wbreeze, if you have 3gs pass it the redsn0w so that no problem appears during the restoration in 4.2.1, 4.3 does not have official JB yet!

  98.   matias said

    Hi Pedro, I bother you to know from where I can download the firm 4.1 since I do not want to do it with the 4.2.1 to have problems. I tell you that I have an iPhone 3g 16gb with jailbreak and released the firm that it now has is 4.2.1 with baseband 6.15.0. greetings matias

  99.   George said

    Hello, good afternoon, I have a problem with the 3GB iPhone 8G, it was with OS 4.1, bb 05:13:04, OS 4.2.1 and updating everything BB 06:15:00 went well, but in Cydia hours update the wifi it does not work,
    I do everything right but when I open TinyUmbrella instead of the options that appear, either in the first video, so enjoy a question mark followed by a code, so as not to give the situation continues.
    Help me!
    Thank you!

  100.   pedro said

    matias I have not found any 4.1 link that I had deleted, but if you already have the 6.15.00 baseband you can use the sn0wbreeze that I have in my videos! It is easy and simple, I hope I have helped you, PS: ios 4.2.1 works very well for me on 3g! Luck!

  101.   pedro said

    George I do not understand your question or your problem, but I deduce that your WIFI died? altogether? does not detect networks? Have you tried with other networks that you have not had before? With the tiny thing if I don't understand you, I hope you are more precise, you can write me anything on my YouTube channel, double click on the video so you can send me some comment since I don't see it here much!

  102.   fared said

    Thanks to the one who did this, I had an iPhone 3g 16 gb 4.2.1 6.15 and I gave it to restore and it got hung up with the cable on the screen, I did the steps and it did not recognize me, but I gave it a bit of numbers and it started thanks brother.

  103.   Chris said

    Hello Pedro, I would like you to help me with this that causes me a lot of discomfort, update the BB 6.15.00 (firm 4.2.1) and restart it with the same iphone 3g to restore it again but it does not give me the redsnow x to go back to install it and release it xq it returns to DFU mode and to top it all in itunes error 1015 that must be x the bb that I put it, what do I do?

  104.   chris said

    Oh I forgot and to top it all I don't have the SHSH for the TinyUmbrella to restore ...

  105.   pedro said

    Chris give a double click to the video and go to my channel, there I have the video about your problem !!!

  106.   ivan said

    Pedro could not put the costum firmware that you use in that video is that I can not get it anywhere!

  107.   Manuel said

    Hi Pedro, I jailbroken my iPhone with the redsn0w and I uploaded the band to 6.15.00 and I already have it but my iPhone froze once it downloaded to me and I did not go beyond the apple screen, I decided install again a custom firmware made by sn0brezze but when I put it in DFU mode and give it install in iTunes it freezes me and throws me the error 1604, 1600, 1603 and I use the iREB ​​to supposedly pass that error but nothing happens. I have a screen with the apple and a wheel spinning down it is an iPhone 3g I would appreciate it a lot if you could help me what to do.

  108.   kenny strawberry said

    http://www.felixbruns.de/iPod/firmware/ sorry I had not put it in the previous one haha ​​well I'll leave it to you.

  109.   jjdike said

    brilliant friend, everything to the first perfect.

    a greeting.

  110.   Adam said

    HELLO PEDRO, SO ... I ALREADY FOLLOWED ALL THE STEPS AND WHEN I INSTALL THE ULTRASNOW NOTHING HAPPENS IT DOES NOT DETECT MY MOVISTAR SIM IT SAYS SEARCHING AND THEN IT IS PUT OUT OF SERVICE. I DO NOT KNOW WHAT ELSE TO DO. MIGHT YOU HELP ME? THANK YOU.

  111.   pedro said

    Take out the SIM and put it in again until you get the signal, so it happens to me after installing ultrasn0w, but once it finds a signal it will always load quickly!

  112.   Adam said

    HELLO AGAIN, PEDRO, I ALREADY REMOVED THE SIM MANY TIMES AND NO MORE, IT DOESN'T GET THE SIGNAL ... WILL I HAVE TO REPEAT THE WHOLE PROCESS FROM RESTORATION? WHAT DO YOU RECOMMEND ME? SALU2.

  113.   Frank Granados said

    How do I know from which company my iPhone is, I bought it from 2nd and I would like to know the company where my iPhone comes from to be able to activate the notifications I am desperate, please help

  114.   Oscar said

    Hello please help me, I have a 3GS 16G on BB 6.15 and 4.2.1
    It is possible to change it to 4.3, and if it is worth doing, also if you know if
    it is possible to change the BB 6.15. Thanks for your support
    Send me your YouTube channel Thank you.

  115.   Geimar said

    IMPORTANT!!
    to those who something like this happened «Hello, I hope you can help me, I do the restore, I get the error 1015 I give it ok, I open> TinyUmbrella and I put exit recovery ... but it leaves me again with the itunes icon and the wire…. I want to dierrr… .. what do I do ??? Please help !!! »

    I HAVE THE SOLUTION, IT IS VERY SIMPLE MAKE A JAILBREAK WITH REDSNOW AND IOS 4.1 AND READY, THE JAILBREAK VIDEO IS ON YOUTUBE !!
    luck!

  116.   Sebastián said

    IS THERE A WAY TO UNLOCK OR CHANGE THE IMEI OF 3G? I CLOCKED AND I DON'T KNOW WHAT TO DO?
    THANKS!

  117.   niko said

    I have a problem, I follow the tutorial as it is but when tinyumbrella passes it, it leaves me the iphone in emergency call mode and at the same time it restarts repeatedly, I hope you can help me, thank you

  118.   Amras cyriatan said

    Pedro help please look I have my iPhone 3G with 4.1 and with the 6.15.00 Baseband but it turned off when I started it did not reload beyond the apple I wanted to install a custom firmware I followed your torial but in iTunes I only get the errors 1600 to 1604 I use the iREB ​​but it is a reverend lie it does not make that happen those errors always come out and I no longer know what to do HELP PLEASE !!!!

  119.   pedro said

    do it with 4.2.1 click on the video and my youtube channel will open, and there I have there you ask me and I will help you better!

  120.   KENNY STRAWBERRY said

    GOOD SEE THAT IT SERVES YOU MUCH BETTER THAT YOU DOWNLOAD YOUR FIRMWARE THEN IT SERVES YOU PERFECTLY PEDRO'S VIDEO BUT VERY IMPORTANT THAT YOU SYNCHRONIZE IT WITH 4.1 SO THAT IT WORKS… HELLO PEDRO

  121.   Diego M said

    What an excellent tutorial, thank you very much

  122.   kain said

    Sorry, can you do this to a 2g, the truth is I have suffered a lot with push messages and nothing, push fix and push doctor and nothing I put auto detect and I get an activation menu for at & t on itunes, what can I do ???

  123.   Diego M said

    I deleted an element from the custom SAM and my phone was only for the emergency call, how can I fix it?

  124.   CONIN BALDERAS said

    On my iphone 3g, when I raised the baseband to 6.15, the gps started to fail, I know that now cannot be fixed, but also the signal goes away very often and it consumes too much battery now even when charging it turns off it consumes more than what What load, DO YOU THINK that with this I can solve the problem of the battery and signal? REGARDS

  125.   KENNY STRAWBERRY said

    Diego, you can synchronize it with iTunes to restore it with your signature or put it in DFU mode so that it recognizes it for the restoration.

  126.   Carlos said

    Hi, I would like to know if there is any way to know the company of origin of the iPhone, since I cannot complete the process without knowing it, and since it is a second hand iPhone, I do not know where it was initially bought ... I already tried with the options that me da from venezuela and they have not worked for me: S

  127.   Bernie said

    Has anyone been able to solve the iPhone Without Service, after installing ultrasn0w?

  128.   ALEJANDRO said

    I CAN'T FORWARD BECAUSE I DON'T KNOW WHICH ORIGINAL COMPANY IS MY IPHONE ,,,, HOW CAN I KNOW IT?

  129.   Gerson said

    Good afternoon can someone help me please I have an iPhone 3g with baseband 6.15.0 it gives me the error 1015 and when I give it in the tinyumbrella it only restarts it and it goes back to DFU mode and also I already used the ireb but it has not worked for me !! Please someone help me!!

  130.   Diego said

    Pedro
    I have a 3G with 4.2.1 and 06.15.00 and the GPS that I should do is not working well. Thank you

  131.   pedro said

    Diego, when putting the baseband of the iPad, which is 6.15.00, the GPS dies !!! there is nothing to do but get used to having an iPhone with a dead GPS!

  132.   Diego said

    But it can't be changed to 4.1 ?????? I bought it and it was like this ???

  133.   Giancarlo said

    Hi Pedro, a query when doing the 4.2.1 jailbreak in settings m comes out 4.1 but hey, I have done the ultrasn0w and it does not recognize my sim, it is clear, I can not make calls, I can do not know where they brought it from, I think it is from the US please help me

  134.   LOUIS GERARD said

    GOOD AFTERNOON PEDRO
    LOOK, I HAVE A 3G 8G, SOMETHING HAPPENED, BRING THE 4.2 AND BASEBAND 6.15, I SEE THAT THEY SEND YOU A LOT OF DETAILS LIKE THIS, BUT THE TRUTH I WOULD BE THANK YOU FOR SOME WAY TO CONTACT YOU TO EXPLAIN ME, YOU KNOW, ERROR 1015 1016 AND EVERYTHING I KNOW DOES IT HAPPEN TO YOU, ALREADY UNINSTALL THE ITUNS, ALREADY CHANGE THE COMPU, THE USB, FROM THE ITUNS PULL THE 4.1, UNLESS THIS IS BAD, YOU DON'T WANT IT, YOU COULD GIVE ME THE STEPS TO FOLLOW, SURE I'M DOING SOMETHING WRONG.
    THANK YOU luis_gerardo_castillo@hotmail.com

  135.   pedro said

    it is impossible to lower the baseband, you can lower the system to 4.1 but the baseband will remain the same !!!!! for those who wish to contact me, double click on the video to enter my channel and voila… Luis Gerado, I'll add you and we'll talk !!!!!

  136.   gustavazo said

    I got error 1015 and I saw your post and it came out .. what a relief I fixed my iphone 3g, what many do not say is that the firmware that has to be put is "custom" or "restore"…. THANK YOU ... my soul returned to my body ...

  137.   Luis Gerardo said

    PEDRO, LOWER THE NETWORK FOR WIN, AND THE TINY FOR WIN, BUT IT DOES NOT RECOGNIZE 4.1 AND THE TINY ONLY OPENS SOME FOLDERS, IT DOES NOT OPEN AS A PROGRAM, GREETINGS

  138.   gustavazo said

    I forgot to mention, I had firmware 4.2.1 with bb 6.15.00 and as the cell phone signal of the low iphone (it is the only bad thing I had) I wanted to reinstall it but I melted ... I got the error 1015 and by no means On the other hand, I was able to recover my iphone and everywhere they say that 6.15.00 can no longer be turned back or anything ... it was already hurting my soul to lose my iphone because of that nonsense ... so reading I got to this blog ... THANK YOU ... I hope you have my luck because I read in many places that many people keep the iPhone in the form of recovery ... I had 4.2.1 and with this tutorial I lowered it to 4.1 but the custom not the restore, I passed the TinyUmbrella as the tutor says and ALREADY the bar came out ... then I jailbrequie it with the redsn0w with the same firmware ... and ALREADY ... THANKS AGAIN !!!!

  139.   marlon said

    Hello, my iphone 3g was working but when I upload the baseband the wifi stopped working, then I tried to mount the OS 4.2.1 with redsnow and now I am in dfu mode and it does not want to start. Could you tell me how to get it going again. I followed your tutorial but now instead of error 1015 I get errors 1604 and 3194. I don't know what I did wrong or if my cell phone is in the grave

  140.   maury said

    I am desperate I need help ……… !!!!!

    I updated my iphone 3g to version 4.2.1 and I put the ipad baseband and everything was worth it but cydia came out in a white icon and without sources so I could not put any sim so I wanted to delete everything and put it back to itunes in DFU mode but the restoration could not be completed, it stops in restoring baseband and stops and stays on the usb cable and the itunes icon that I do please help ………………… .. !!!!! I leave my email if someone can help me
    maury-acosta@hotmail.com

  141.   Max said

    good I have a problem I have the firmware 6.15 and no operator enters so I want to download it to 4.1 or 4.2 is this possible?

  142.   edgar said

    Hello good my problem is the following I have an iPhone with firmware 4.0 and baseband 6.15 but it stayed in recovery mode and I use tynyumbrella to exit recovery mode and restart and everything when turning on continues in recovery mode does not happen nd I had already done it once and Yes it worked for me but now I no longer what can I do

  143.   Gains said

    Señor Pedro is the master p..to. Congratulations on such a well-crafted tutorial. For people who have the problem of notifications use the second video tutorial. The only clarification for people that the SIM is not activated through the BY BUNDLE NAME option simply because they do not know what the original operator is, that I leave it in AUTO DETECT, which worked perfectly for me.

  144.   Miquel said

    Good Pedro ...
    First of all… I would like to thank you effusively for the great explanation and step-by-step guide to restore and activate my iPhone 3G version 4.2.1 and baseband 6.15.00…
    In fact I almost gave it up for lost… and I found your explanatory videos… and I followed your explanations step by step… and right now the iPhone works like a charm for me… as if it were new.
    But I had two little problems:
    - I had to look for a 4.2.1 firmware that did not give me the 1015 error (at this address: http://ul.to/5lzsk8) ... since I was unable to get the tinyumbrella to work ... and it was a firmware that came with SAM included. Once installed ... I had to pretend to reinstall from Cydia the repo ...http://repo.bingner.com and install SAM and SAMprefs again ... it gave me an error and I deleted one of the SAM installations ... and from here on ... I followed your instructions and ... everything was fabulous ...
    - The notifications did not work for me ... for which I had to install from Cydia a program called DOCTOR PUSH ... and after 2 attempts ... the notifications also go to me!
    I do not know if I have been involved a lot ... I just wanted to contribute my experience ... since that of others has served me ... Again ... thank you very much !!!

  145.   Oscar Gutierrez said

    Mano… .. THANK YOU !! more clearly you can not be in the videos, I had my iphone 3g 4.2.1 baseband 6.15 that could not unlock it, search and search the network and nothing until I came to stop here, very good tutor and I can not believe how simple it was XD, the problem that I had not put the ios custom and then the one with SAM that I had to look for the operator, Thanks brother you saved my wallet because it was my mother's cell hahahahaha

  146.   JEBA said

    hey friend, I have the iphone 3g 6.15 4.2.1 is in use and everything but the push and the battery fail me, my question is, do I install the sam like this or do I have to restore it as you did? It is American and I use it in Mexico. Thank you I hope you answer me.

  147.   Ruben said

    Hello, I have tried for 2 days reading and looking at many tutorials and finally I have been able to make the notifications work and the battery lasts longer, you are a genius, I thank you very much after so many tutorials, yours is real! I assure you that it works if you do it verbatim, thank you very much.

  148.   Ed Aguilar said

    I have an Iphone 3G IOS 4.2.1 BB 6.15 released with Ultrasn0w, the problem I have is that the GPS and WiFi are gone, and the battery discharges quickly, CAN SOMEONE HELP ME IN DOING THIS PROCESS ABOVE MENTIONED BY FRIEND PEDRO , MY IPHONE WILL RETURN THE GPS AND WIFI AND THE BATTERY WILL NOT DISCHARGE THANKS IN ADVANCE

  149.   Diego said

    Pedro
    With the 4.2.1 and 6.15.00 and the 5.09 bootloader, everything is working except the GPS. It doesn't work at all, it finds perfect which street you are on, it makes me poor GPS reception. I think the worst thing is the battery. Notifications work fine without having that SAM. Improve the GPS ??

  150.   They were said

    It does not work for me. I have followed all the steps one by one and when after doing Exit Recovery with the Tiny, it restarts and is back in Recovery (usb + iTunes).

    I do not know what else to try, I have reviewed a lot of websites and in the end I have an expensive paperweight.

    Thanks for the help

    1.    antonio said

      I am like you! exactly the same, what did you do? or do you still have the problem?

      1.    They were said

        I finally got it to work. Create my own Firmware from an existing one, I did not add or remove anything. It was only to open one with Sn0wbreeze and save with the basics (I looked at several websites) but without making any invention.

        So I retraced these steps and then it worked. I imagine that the file generated with the same PC that does the restoration creates some mark, label or I know what. The point is that this way it has worked and the truth is that it goes much better than with 4.1. or 4.2.

        Luck.

  151.   koko said

    Hello I have an iphone 3G firmware 4.1 BB 6.15 what happens is that I put it to itunes to update and what happened in the end is that I got error 1015 with the itunes logo and the usb ... I do not know how to recover it ... help me tell me that it is possible but and tried some tutorials and nothing… ..

  152.   Alberto said

    Help me, two weeks ago I tried to update my iphone 3g had firmware 4.2.1. and baseband 6.15, but it gave me the error 1015, and now unfortunately they fixed it for me but they put firmware 3.1 on me, and it still has baseband 6.15, but I want to put firmware 4.2.1 on it. I tried to do it once, but it gave me the same error 1015, I need your help, since with 3.1, I cannot download applications from the app store. help me please.

  153.   Cristian said

    What's up??? I would like to know if with the procedure after installing SAM and going to redsn0w, my iphone will reset ??? or in other words ... I lose my contacts ??? what would hurt me the most ... or if there is a solution for my contacts ??? (in case you missed them with the procedure)… Thank you….

    1.    Rafael said

      If you lose your contacts and everything you have on the iPhone, but no problem, when you connect the iPhone to iTunes, it creates a backup that saves all the settings, from the alarms to the phone book, it's just a matter follow the steps and after having the iphone restored, recover the information with the backup.

  154.   hunkix said

    The videos are not seen, you can place the links again

  155.   Edgardo said

    Could you upload re-upload the firmware?
    Thank you.