Tutorial: Jailbreak, Unlock and Activate iPhone 2G with Blackra1n

iPhone 2G

Requirements

Just for him iPhone 2G (Edge)

Download Blackra1n for Mac or for Windows, by clicking here

It is necessary to have installed the Firmware 3.1.2.

Download: Firmware 3.1.2

DO NOT it is recommended to restore a backup with iTunes.

Recommended set iPhone as "New" through iTunes

Tutorial


Click on the Blackra1n icon to start the application.

A window will open with the button: "Make it ra1n"

blackra1n_1

Will go into mode  "Recovery", what will the jailbreak, la activation and install the application Blackra1n on the device

blackra1n_2

On the iPhone, Geohot will appear full screen, followed by the following image

blackra1n_3

Now, will appear, the jailbreak has been completed and was a success.

Wait some 20 seconds for the phone to restart.

Open Blackra1n and download Cydia.

blackra1n_4

Reopen Cydia and make essential changes

Install "BootNeuter"

BootNeuter_1

The BootNeuter must have this configuration

BootNeuter_2

When the settings are correct, like the one in the image above, select the button «Flash" and after a few seconds the Phone 2G (Edge) will have been unlocked.


Follow us on Google News

118 comments, leave yours

Leave a Comment

Your email address will not be published. Required fields are marked with *

*

*

  1. Responsible for the data: AB Internet Networks 2008 SL
  2. Purpose of the data: Control SPAM, comment management.
  3. Legitimation: Your consent
  4. Communication of the data: The data will not be communicated to third parties except by legal obligation.
  5. Data storage: Database hosted by Occentus Networks (EU)
  6. Rights: At any time you can limit, recover and delete your information.

  1.   pabloo said

    Are contact data lost etc ?? ...

  2.   berlin said

    pabloo
    Before installing it, synchronize with itunes and when you have finished it, synchronize again and that's it

  3.   Esteve said

    Pernda but what is this for?
    I have the iPhone 2g released and with the jalbreak made in the evrsion 3.0
    should I do it?

  4.   pears said

    Well, I restored the orginal 3.1.2 with itunes. He asked me for a sim from att, if I put a sim on him, he would put the pin on it but he did not do anything else, nor did the icons appear.

    I started the blacrain (in windows) and it already showed me the icons.

    But I saw that YouTube was not going, not even with wifi, that which positions you on the map of the googlemaps application, it was not going either .. what could happen?

  5.   pears said

    I have seen that the program installs you that of the black drop, that of rock that is like the extinct installer?

    If you want to delete that app from the icons, it is not deleted, you have to uninstall with the option and restart the phone. so it goes

  6.   ana said

    that firm k low is the original?

  7.   ana said

    The bootneuter, had to be executed 2 times. this he asked me,

  8.   Hobbes said

    Hello! I have a problem, I update with itunes to 3.1.2 and I can't jailbreak with blackra1n: S what can I do?

  9.   berlin said

    ana
    Of course, you don't see the original when you open it that it is directly from Apple
    Hobbes
    I can not…???
    Specify a little more what is happening to you or what comes out on the iphone and what type of iphone you have.
    We are not fortune tellers

  10.   Hobbes said

    Sorry for the little info, I have an iPhone 2g imported from the USA, update to 3.1.2 through itunes. After this download blackra1n and try to jailbreak. The process seemed to work but after restarting the iPhone I got the iTunes connection image and it only allows me to make sos calls and receive any type of call. I have tried both on windows and mac os and I don't get anything.

    By the way, are you from Salamanca? if so, we are neighbors hehe
    Thanks in advance 😀

  11.   Hobbes said

    Finally I opted to restore to 3.0 and re-jail with redSnow. Thank you anyway! a hello 😀

  12.   fading said

    in the tutorial there is an error… .lol where it says there will be cydia and download blackrain should not be the other way around !!!

  13.   fading said

    excuse my animal spelling… ..it's the fault of MSN

  14.   kristian said

    HOBBES (the same thing happens to you !!)

    The process seemed to work but after restarting the iPhone I got the iTunes connection image and it only allows me to make sos calls and receive any type of call. I have tried both on windows and mac os and I don't get anything.

    WHAT HAVE YOU DONE TO RESTORE? THANKSSS

  15.   rookie pericon said

    Berllin, I'll tell you:
    The tutor is ready, I take charge, but you try to guess what you do not read and little by little you prosper ... until you stop.
    I have managed to get to:
    «The BootNeuter must have this configuration:»
    But I can't change that configuration ... I get this warning:
    please wait
    Determining current settings… »
    and after 10 ′, 20 ′, 30 '... or more another notice says:
    «Necessary restoration. The iPhone cannot make or receive calls. Restore it from iTunes. »
    Press OK and go back to "please wait ... blablabla ..."
    Anyway, ahem…. restore? or what do I do?

  16.   Z Thor said

    From the previous comments, it seems that unlocking and activating the iPhone EDGE through Blackra1n is causing problems.
    I gather that berllin has had none. If someone else has worked out the method well, post it here, because I need to update to firmware 3.1.2 but I can't quite make up my mind.
    Greetings.

  17.   berlin said

    I have not had any problems doing it, I have only done it with 2 iPhones.
    It is very fast and easy.
    But if it has given you problems, use the modified fimware that I uploaded to the Blog, which is going very well.
    rookie pericon
    You have not finished the sentence and what you should do is go to the iPhone Settings «Settings» - General - Automatic lock and select none

  18.   berlin said

    By the way the 2G is an SUV and we can do the jailbreak and release perfectly with the Pwnage Tool with Mac, With a modified firmware and with the Blactra1n, we are in the firm that we are

  19.   rookie pericon said

    Sorry berllin but I don't know what phrase you mean. And in the settings I always have it as you say: General - blocking - none.

  20.   berlin said

    Well then it is not what I thought.
    but anyway it changes to a minute, go back to the normal screen and go back in and select NEVER again, reboot and try

  21.   ana said

    Berlin what blog?

    Does anyone know if with the 2g and the firm 3. there are mms? or how do i activate it?
    what a pity the 3g does not have

  22.   berlin said

    ana
    this blog

  23.   Z Thor said

    With the tranquility that berllin has transmitted to me, I have updated without any problem.
    I have upgraded, instead of restoring as on other occasions, to the new firm 3.1.2, and then I have run blackra1n.
    The surprise is that when the process has finished I had my iPhone 2G already FREE, without having to use BootNeuter, and with all the applications from the App Store, contacts, etc. What was not installed was Cydia and the applications installed with it.
    Through blackra1n I have installed Cydia and then everything that depends on it.
    Good luck to everyone.

  24.   rookie pericon said

    berllin, nothing, there is no way ... Anyway, the Cydia is there. I have removed the BLACKRA1N and BOOTNEUTER and nothing seems to happen. It's enough? Can I get by with the Cydia nothing else?

  25.   Z Thor said

    periconovato: if you have problems with Blackra1n, why don't you follow the advice of berllin and update with the firm modified by him? Directly unlock and unlock iPhone 2G without further hassle.
    Luck.

  26.   rookie pericon said

    Ok, berllin. Thank you very much for everything as always; you are a luxury, man!

  27.   Dr Ortega said

    hey berllin a doubt ... the BootNeuter is necessary to do it as the tutor says .. ?? I finished hcr everything and it was super simple .. iia was updated to firmware 3.1.2 and my iphone was released but my question is if the bootneuter is necessary or if I said it like that, there is no failure? grax

  28.   cuba24 said

    it stays in done wait for rebbot but does not restart aaaaaaaaaaaaa

  29.   berlin said

    Dr Ortega
    If it goes well, you leave it like that
    cuba24
    That is a problem of YOUR iphone or your USB cable
    Please try more times or try to remove the USB cable when it stays that way and put it back

  30.   Mickey said

    sitve for an iphone 2g with baseband 05.11.07?

  31.   berlin said

    Mickey
    The Blackra1n is specific to that Baseband.

  32.   marina said

    Hello, I am keda caught where it says done, wait for reboot ... and after half an hour nothing turns on normal and I don't feel like it ... I know I'm wrong because I have the 2G itouch with the itounes 3.1.2 version. two .
    can you give me the steps?
    all the best

  33.   cuba24 said

    Thanks Berllin, it was changing the usb port and it worked, there was no need to install the boot neuter, it kept the previous base, the hard battery as when we had 2.2.
    All the best

  34.   berlin said

    Mars
    Only 3 comments above yours have the possible solution, which worked most of the time.
    if it doesn't work like that, try another computer

  35.   Ernest cancun said

    Hello berllin my question I have 2g baseband Antigua. If I update through iTunes, upload the baseband? And with this tutorial he is free with baseband ,? Greetings

  36.   berlin said

    If the baseband goes up
    In the 2G at the moment the baseband does not influence
    but I would put the modified firmware since it is in the Blog for the 2G with 3.1.2

  37.   siero ramon jose said

    I no longer know what to jilbreak my iphone 2 g with redsnow and it always puts me back on the screen of the usb cable and itunes
    what I do ………….

  38.   little balloon said

    Well this was much easier than I expected, I updated to the official 3.1.2, I did the blacra1n and now I am released, I do not need the bootneuter and everything working at 100%

  39.   berlin said

    siero ramon jose
    you can do this tutorial

  40.   Carlos Andres Henao Agudelo said

    the post is very good but it happens that I cannot make changes in bootneuter

  41.   sanpedro said

    Install the berllin update, the cydia is included, but at the end, the bands are supposedly open, but my sim does not recognize me, the configuration of the neuter boot is the same except for the version since the berllin firmware configures it like that by itself and I can not put any sim card from any operator does not recognize it I'm from Colombia, everything else goes well but I can't use it as a phone, what can I do? I hope you can help me

  42.   berlin said

    Carlos Andres Henao Agudelo
    if you can't make the change it must be because you already have the correct one
    sanpedro
    Replace the modified firmware and reboot repeatedly
    another solution is to put it in airplane mode and remove it

  43.   sanpedro said

    another thing berllin the iphon has a modem version 04.05.04_g has this something to do I still cannot recognize the sim it detects the operators that are movistar comcel and you but I get a restricted network

  44.   sanpedro said

    of course when I try to connect to one of them with their respective sim

  45.   cauly said

    It worked perfectly and I did not need to install the bootneuter, I have an iPhone 2g brought from the US, it is unlocked and released.

    Thank you very much

  46.   splash0rz said

    Berlin, I have the US iPhone 2g with version 3.1 installed through a restoration with custom firmware ... the only reason I would do this is to fix the push notifications that now go half yes, half no, because I lose many of them, we never arrive….

    By doing this, I ensure an official certificate for push notifications and would I have them working 100%?

    Thank you very much!

  47.   berlin said

    sanpedro
    What you comment is not normal since the modified firmware is already carried by thousands of iPhones.
    What iphone do you have?
    splash0rz
    As you will understand, I cannot assure you of anything.
    It is your responsibility ...

  48.   sanpedro said

    GOOD ANOTHER THING HOW CAN I BRING IT TO VERSION 1.1.4 SINCE I
    I KNOW THAT THE PROBLEM IS THE IMEI WHEN I HAD IT I HAD IT IN VERSION 1.1.4 WHEN I ACUTALIZED THE PROBLEMS STARTED AS THE IMEI WAS CHANGED OR BECAUSE OF NATURE THE IPHON WAS WITH AN IMEI CHANGED SO THAT I HAVE RED NOW THAT I HAVE THE IMEI THE ORIGINAL OF THE IPHONE DOES NOT RECOGNIZE ME THE NETWORK EITHER BECAUSE IT IS REPORTED IT WAS SOLD TO ME BEING OF Doubtful ORIGIN NOW I KNOW THAT THE ONLY THING I CAN DO IS DOWNLOAD IT TO VERSION 1-1-4 BUT I JUST MANAGED TO TAKE IT TO 2.2.1 OF THERE FOR BELOW I DON'T KNOW HOW SINCE ITUNES SHOWS ME ERRO 1601 OR 1600 OR 20 IF SOMEONE CAN TELL ME HOW TO DOWNLOAD IT FROM 2.2.1 TO 1.1.4 THEY WOULD SOLVE THE PROBLEM BECAUSE I CAN MAKE FAKE IMEI USING THE ZIPHONE THANKS AND I'M IN PROBLEMS WITH THIS IF SOMEONE HELPS ME I WOULD BE VERY GRATEFUL THANKS TO ALL OF YOU, ESPECIALLY BERLLIN ...

  49.   sanpedro said

    SALLE ANOTHER THING I PUT IT IN DFU MODE IN VERSION 3.0 THEN I TRY TO DOWNLOAD IT DIRECTLY TO 1.1.4 AND IT GIVES ERROR 1601
    CLEARLY DOING THIS BY ITUNES IN THE ITUNES VERSION 9.0.2 I NEED AS I ALREADY TELL YOU TO TAKE IT TO THE 1.1.4 AND THEN TAKE IT TO THE 3.1.2 WITHOUT CHANGING THE IMEI THAT I WILL PLACE WITH THE VERSION 1.1.4 THE BASE BAND IS EL 04_05_04_G HELPAAAAAAAAAAAAA PLEASE…

  50.   sanpedro said

    I think that with itunes 9.0.2 I cannot and with the ones from before I am not desperate I think that my iphon does not even work to wedge the door of the house so that it does not close

  51.   sanpedro said

    I FINALLY TAKEN IT TO VERSION 1.1.4 I CHANGE THE IMEI AND FREE IT NOW THE DILEMMA IS TO BRING IT TO VERSION 3.1.2 IF TO CHANGE THE BASEBAND OR THE IMEI AND WITH CYDIA INSTALLED BECAUSE IN VERSION 1.1.4 THE PHONE SERVES BUT VERY REDUCED FOR NOT SAYING UQE ALMOST NULL I CANNOT DOWNLOAD ANYTHING FOR THE INSTALLER THANK YOU IF SOMEONE HAS A CUSTOM TO BRING IT TO 3.1.2 WITHOUT LOSING ALL MY WORK CANNOT BE CHANGED IMEI REPEAT IT AND THE ORIGINAL IS STILL REPORTED. IF SOMEONE IS PACKAGED WITH THE LIBERATION, YOU CAN HELP THEM… SOLUTION THANKS…

  52.   Arnaldo said

    Thanks Berllin for the tutorial, it is excellent.
    It worked with a few obstacles:
    1.- Blackra1n installs perfect, wifi works (uf) and Cydia is installed.
    2.- Bootneuter does not appear in Cydia. Reset the iPhone and when I restart it, it updates to a new version, when it finishes, YES there is the Bootneuter (BN).
    3.- I install BN and hang up the iPhone. I have to turn it off by pressing the two buttons.
    4.- I restart BN and it tells me that it cannot read the baseband because it is starting «comm loader»?
    5.- Again to reset the iPhone, I start BN again and it goes well and unlocks, long live!
    The only thing that happens to me now is that I write notes and it does not store them. When I give OK it goes back to the springboard. Is it a problem with the apple software, Blackra1n or my iPhone?

  53.   alex said

    perfect! wonderful! how simple and easy ...
    do not need to install the BN. fully freed. I honestly notice a bit more speed on the iphone, although maybe it's pk I haven't filled it yet with apps hehehe releasing an itouch 2g with blackra1n is it so simple with the edge?

  54.   sanpedro said

    Help me to upload from version 1.1.4 to 3.1.2 without changing the imei made by ziphone or to 3.1.2 but if I upload it I have several problems starting that I do not have applications because the installer says error when installing anything I repeat uqe I can't change the imei because it blocks my phone, I have no service, the original is reported

  55.   berlin said

    sanpedro
    This custom holds the baseband. test it:
    https://www.actualidadiphone.com/2009/10/14/tutorial-jailbreak-con-el-custom-firmware-3-1-2-modificado-para-el-iphone-2g/
    If you get an error, use IREB which is also on the Blog, at the time of the error
    Arnaldo
    Use the custom firmware above your name in this post.

  56.   sanpedro said

    berlliin use your firmwarea but as expected I update the baseband to 04.05.04_G and therefore I change the imei and the phone is without service I need to update without changing the baseband or imei thanks ...

  57.   gipu said

    Are sms lost?

  58.   berlin said

    sanpedro
    Read «Manuk» here, it may help you
    It's in the comment before the last one of mine
    https://www.actualidadiphone.com/2009/10/14/tutorial-jailbreak-con-el-custom-firmware-3-1-2-modificado-para-el-iphone-2g/comment-page-5/#comment-94273
    gipu
    If you sync with iTunes before doing it, they are NOT lost

  59.   gipu said

    Thank you berllin

  60.   michel7878 said

    Sanpedro, I'm looking for the same as you, so far the only thing I've got is a custom 3.0 that keeps the fake imei ...
    The links:
    http://rapidshare.com/files/246914026/iPhone_2G_Firmware_3.0_Fake_IMEI.part1.rar

    http://rapidshare.com/files/246917888/iPhone_2G_Firmware_3.0_Fake_IMEI.part2.rar

    I hope they serve you and if you have got one in 3.2.1 help me!

  61.   omytronic said

    healthyhedron:

    I am in the same as you with the difference that movistar and you accept but comcel that it is the one that matters most to me, no. I need help for the imei

  62.   Gysell Cobos said

    mine is blocked I receive messages and used the Balckra1n but it says there is an error! I have an iPhone 2g

  63.   George said

    Good evening, berllin:

    I have a problem. I have installed your firmware on my 2g brought from the USA and the phone works fine, but when I open iTunes I get the following message "iTunes does not recognize the content of this iPhone ..." and it won't let me do anything with it.

    Can you think of a solution?

    Thank you. Greetings.

  64.   berlin said

    George
    Check you have the latest itunes 9

  65.   Leonel said

    hello berllin i restored and updated my iphone 3gs to version 3.1.2 i did the jailbreak with blackra1n and the release of it with snow but the itunes 9.0.2 when connecting the iphone tells me that the sim card is not compatible and not open youtube or the maps I use the operator line movistar he does everything else he enters the internet but at the moment of synchronizing it with itunes 9.0.2 that message does not appear sim card is not compatible please help me thank you very much

  66.   Leonel said

    I insist please I trust your help

  67.   Leonel said

    I rectify at the time of synchronizing it with iTunes 9.0.2 the unsupported sim card appears the iphone is 3gs 32gb with 3.1.2 software jalbreak with blackra1n and released with snow I wait for the answer and I forgot it enters YouTube but I can not see the videos does not load the maps please help me

  68.   pato said

    I struggled, I leave my situation for whoever has been in a situation like mine, I updated my iPhone EDGE through iTunes to 3.1.2 Restoring it as new, and when running Blackra1n if the image of this guy appeared in the iPhone, and Blackra1n said it was ready, but I returned to the iTunes Emergency screen on the iPhone, the solution was, download the firmware that is at the top of this page, I restored the iPhone again, and the rest, as explained , I didn't need the Boot Neuter to unlock. Greetings

  69.   Sergio Ivan said

    Hello Berllin,
    Please enlighten me with your wisdom. After restoring and updating my iPhone 2G to version 3.1.2 by jailbreaking with Blackra1n, I have NOT been able to regain access to Wi-Fi. I think I have tried almost EVERYTHING, and NOTHING! ... I'm desperate !!! ... I'll be grateful if you can provide me with an alternative that DOES work, beyond the simple one: "Restore network settings" ... Thank you.
    Regards,
    Sergio

  70.   omytronic said

    Sergio Ivan

    1. Test if the problem is only with your own wireless network. If you can connect and navigate correctly in other wireless networks, the first step to take is to get to the list of wireless networks, click on the blue Arrow icon to get to the detail of the wireless connection, and scroll down, up to the "Forget this Network" button. After that, disable the WiFi, and re-enable it. Try to reconnect to your network.
    2. If the problem is with your network, but the “Forget this Network” solution doesn't work for you, there are two other options.
    First - Reset Network Settings
    A) Go to the dashboard (main screen)
    B) Click on Settings
    C) Click on General
    D) Click Reset
    E) Click on "Reset Network Settings"
    Second - Refresh the configuration of your modem or wireless router
    A) Enter the configuration panel of your wireless network (to the portal of your modem, or router)
    B) Look for an option that says "Enable SSID Broadcast". (What makes the router or publicly display the name of your wireless network)
    C) Disable this option, save the changes, and re-enable the same option (so that it does show the name of your network)
    D) Try connecting again.
    The latter was the solution that worked for me. After spending two hours reading forums and posts, I hope this information helps you.
    If you still have a problem anyway, you can post a comment here and I will try to help you.

  71.   Lucretius said

    @ michel7878 and SanPedro: I tell you that I have the same problem as you, although mine is more serious because the only thing I can do to my iphone is to put firmware 1.1.4 ″ because of the IMEI reported,
    I would appreciate your help to download version 3.0 or if there is 3.2.1 better!… since in the links that are there above I get the following error: »» Unfortunately right now our servers are overloaded and we have no more download slots left for non-members. Of course you can also try again later. »»
    and I have not been able to download the files.
    appreciate your help
    My iphone is a 2g of 8gb

  72.   berlin said

    Leonel
    If you use Movistar and have released the iphone, I understand that the iphone is not Spanish, that you will have bought it from someone outside of Spain.
    The only solution I see is for you to restore it again.
    Sergio Ivan
    Try my custom firmware to see if it solves.
    Many times it is solved only by making firmware changes, do not ask me why. since I do not know, of course on other occasions it is not solved.
    https://www.actualidadiphone.com/2009/10/14/tutorial-jailbreak-con-el-custom-firmware-3-1-2-modificado-para-el-iphone-2g/

  73.   dieferpo said

    PLEASE!!! HELP!! I NEED TO MODIFY MY IMEI AND I DON'T KNOW WHAT ELSE TO DO. I HAVE AN IPHONE 2G WITH THE 3.1. THE UNLOCK WORKS SUCCESSFULLY BUT EVIDENTLY THERE IS AN IMEI LOCK. THE TEAM BUY IT IN THE USA WITH AN INVOICE, AND I BROUGHT IT TO ARGENTINA RUNNING, THE PROBLEM ARISED AFTER AN UPDATE THROUGH ITUNES. IF THEY HAVE ALREADY GOED THROUGH THIS SITUATION THANK YOU FOR ALL INFO !!

  74.   Lucretius said

    @Dieferpo:
    The only thing in which I can help you, in which I have knowledge and that I have done myself, is the following:
    for your iPhone to have a functional version 1.1.4
    downgrade to version 1.1.4 download firmware http://appldnld.apple.com.edgesuite.net/content.info.apple.com/iPhone/061-4313.20080226.Sw39i/iPhone1,1_1.1.4_4A102_Restore.ipsw
    download itunes version 7.5
    http://www.oldapps.com/itunes.php
    download the ziphone
    http://download.ziphone.org/
    After downloading the above, you install iTunes, eye it must be that version since it requires some controllers ...
    Once you have installed the iTunes, connect the iPhone to the PC, you choose the option to restore with the SHIFT key, you select the downloaded firmware, you wait for it to finish restoring the firm, and then you apply the ziphone tool, you apply the tool and it was
    then if you close the option, you go back to the ziphone and use the imei exchange tool.
    that's all I did and it worked, now I'm trying to update it to version 3.0 with a fake imei but with a firm that doesn't update the base band.
    thanks to berllin

  75.   dieferpo said

    Lucretius:
    From already very grateful for the data. I know that this is a difficult subject to play, but I bought the cell phone in good faith when I went to the USA, and I took it walking! Now it is impossible for me to return with the corresponding invoice to claim the malfunction ... (I make this clarification because a lot is said about not making this change, since most are made to stolen cell phones, it is not my case)
    Now a query regarding the IMEI change:
    How do you choose the new IMEI? do you write a random number ???? or are the last numbers of the IMEI that appears on the display randomly altered?
    Thank you in advance!

  76.   Lucretius said

    @Dieferpo:
    Ok, I understand perfectly that good faith works, in my case the iPhone I performed this maneuver on belongs to a friend who bought it for free market and well, he had no luck and they killed him as a cocoon ... I came to me screaming to help him , and well, what I do is for purely educational purposes, not commercial since free information is something of which we must be aware and handle with prudence,
    Returning to the topic, the imei can be generated randomly by inventing the numbers "so I did!" and it worked for me XD
    any problem do not hesitate to post.
    remember:
    "Ignorance enslaves, knowledge sets us free"

  77.   michel7878 said

    Something quite confusing happens to me, I am from Ecuador, I have managed to lower to 1.1.4 and change the imei and go up to 3.0 with several iPhones without mess, I tell you that in Ecuador there are two large operators (Movistar and Porta), I recently worked with A cell phone that was reported in Movistar, but obviously it did not work for any operator, when I lowered to 1.1.4 and changed the imei, eye that I tried with many imeis, the cell phone gives me service for Porta, but for Movistar nothing to see, I The question then arises as to whether there is any other way in which the cell phones are registered in the operator other than imei, since changing the imei does not give me service in movistar, only in porta. Greetings

  78.   dieferpo said

    Lucretius / Michel7878
    One more query:
    I have downloaded the Itunes version 7.5 for Mac (I am a MAC user). But the point is that when I connect my iPhone, Itunes opens, but it never shows me the iPhone in the Itunes window. If I go to the menu> preferences> Itunes devices it does not find the iPhone, I have even tried in the different power modes, but in no way do I have a connection from the Mac to the cell phone? What I can do????

    Michel7878:
    How did you go down to version 1.1.4 ... Firmware gives an error from iTunes. Have you also done it with version 7.5? Have you tried doing it with a Mac?

    Thanks in advance to both!

  79.   michel7878 said

    dieferpo:

    If you use itunes 7.5 and your iphone is in a higher version it is obvious that it does not recognize it because it does not know what the hell is what you are connecting, you have to put your iphone in DFU or Restore mode and use itunes 7.5 there if you are going to acknowledge, and do the restore to 1.1.4.

    Once the restoration process is completed to 1.1.4, it gives you an error and remains in restoration mode, you must use one of the programs that existed at that time, for example ziphone or iliberty to remove it from the "restore" mode, then you do the jailbreak with the ziphone, then you use Kiphone to erase the baseband, you restore once more normally to 1.1.4 and from there you do the JB again with Ziphone and change the imei, and voila, I've only used PC. Regards

  80.   Lucretius said

    @ DIEFEPRO I agree with michel7878 those are the steps: on mac it gives you trouble because you already had an itunes installation higher than 7.5 and when one uninstalls there are some things that remain from the last installation.
    I recommend that you look for a relative, neighbor or friend who can lend you their pc to do the downgrade. I am a Mac user but this time to downgrade I had to resort to an old pc that I stored in my home studio, believe me it worked without any problem »it is better to install iTunes 7.5 for the first time and not have to uninstall,
    do not forget to comment

    @ michel7878 in Colombia I have not had trouble with Movistar
    maybe try another valid iphone imei
    salu2

  81.   eddyolay said

    hello Michel7878
    I want to know Please what is the itunes to install the firmWare 3.0, in your links and you say that it does not modify the baseband and imei?
    Thank you.

  82.   eddyolay said

    hello Michel7878
    I want to know Please what is the itunes to install the firmWare 3.0, in your links and you say that it does not modify the baseband and imei?
    Thank you. and the files to unzip from the links have a password or passW

  83.   eddyolay said

    hello Michel7878
    I want to know Please what is the itunes to install the firmWare 3.0, in your links and you say that it does not modify the baseband and imei?
    Thank you. and the files to unzip says that part 3 is missing

  84.   radabom said

    thanksssssssssssssssssssssssss.chamo.meas saved.look on like this you're going very well.mil congratulations

  85.   Sergio Ivan said

    My dear Berlin,
    I'm about to abort the frustrating mission to re-enable my iPhone 2G Wi-Fi access. After rigorously following the procedure that you indicate, which did not report any problem and as such I was able to conclude successfully, it did not manage to "revive" the disabled and gray Wi-fi.
    HELP !!!… Do you have any recommendations to "revive" Wi-Fi beyond the known restoration alternatives? Thanks.

  86.   Mariad said

    Hello, I have a situation that is not so serious but it is not ideal.
    I have an iPhone 2g 8gb brought from the USA already released.
    I had version 2.2. I did the update through i tunes by downloading the firmware 3.1.2 to the phone. When it finishes I have the usb icon with the itunes and it lets me only call and receive calls, I cannot access the springboard, and on the pc in the itunes I get a sign that the sim is not compatible or something like that. I look a bit in the forums to see what I can do and launch the blackra1n from the PC. Miraculously after launching this program, it does everything they said was happening, the photo of that little boy appears, dsp la manzanita and finally the springboard with various applications, messages, photos, songs, etc. and the applications of the apple store but not those of cydia . The blackra1n icon, the famous droplet does not appear so I cannot install cydia and its applications. I ran the blackra1n again a couple of times, I restored it from the phone (restore by saving content), turned it off and on, and nothing, the blessed drop does not appear on the springboard x what I run out of cydia.
    Is there any other way to download cydia? I looked for it in the apple store and it is not there. Apart from that the phone works perfect, the wifi, the messages, calls, music, everything. What do you think could be happening? Can you think of a solution? Thank you in advance. Maria from Argentina.

  87.   berlin said
  88.   Mariad said

    Berlin, Thanks for your suggestion, but I have no idea how to do that. Do I have to reset the iPhone first? How do I install that firmware with my PC? the other issue I have is that every time I try to restore the computer to do the whole process again the machine hangs when it wants to copy the iphone. I did not do it because I got bored of waiting but I had thought about restoring to the original settings from iTunes. As I see above on this page it is not a good idea. To install your firmware from the point where I am (I already have 3.1.2 installed to which I could not download cydia) how should I proceed? Thanks and sorry for the ignorance.

  89.   berlin said

    At the point where you are, it is very simple if you already have the firm 3.1.2 installed.
    You just have to do this:
    https://www.actualidadiphone.com/2009/11/04/tutorial-jailbreak-liberacion-y-activacion-del-iphone-2g-con-blackra1n/
    ---
    If you already had it released previously, it is most likely that it is not necessary to pass the Bootneuter at the end

  90.   Mariad said

    Berlin, I already did that and my problem is that after applying the blackra1n it does everything but the droplet does not appear. I did it like 5 times and nothing! I can't get my cydia back, what do I do?

  91.   berlin said

    If the Blacra1n installs completely and does not give an error, the droplet has to appear accurate.
    Have you checked that it is on another page of the iphone?

  92.   Mariad said

    Yes, of course I checked that the blessed drop was not on any page. What I finally did was restore the iphone from itunes by saving a backup. When I finished, that usb icon appeared with an arrow to iTunes and with the sim active. In the itunes of the pc it appeared that the sim was not compatible blah blah. Anyway, I passed the blackra1n and the phone returned to appear with the factory settings but version 3.1.2. From there I went to the itunes of the pc and restored the contents that I had saved. guala! I have my iPhone back with everything with droplet, I installed cydia and all the applications I wanted, the only thing I did not copy the music so I will take the opportunity to update my music since I had too much more music. Anyway I appreciate the help, I hope this helps someone. This whole process took me like six hours. What took the longest was to save a backup, in fact I thought the pc was hanging, but I left it like that, I went to sleep and in the morning I was done. Greetings to all iphone addicts 🙂

  93.   berlin said

    Mariad
    From what I am reading the problem you had it in your firmware since the Balckra1n only works with Firm 3.1.2 and it is specified in the tutorial

  94.   eddy said

    sanpedro and michel7878
    use the following firm 3.1 fake imei which is the last one I have got that keeps the fake imei, http://rapidshare.com/files/291069672/iPhone_2G_3.1_Fake__ME_.part1.rar
    http://rapidshare.com/files/291099942/iPhone_2G_3.1_Fake__ME_.part2.rar
    http://rapidshare.com/files/291103299/iPhone_2G_3.1_Fake__ME_.part3.rar
    Password: iPhoneTR.org
    They tell me how it went.
    chao

  95.   freddy said

    Hello Berlin could you help me I have an iPhone which I installed 3.1.2 to unlock everything was working but now the wi fi does not work, also when I configure the apn in the data network and the mail accounts for some reason the phone does not ring nor does it notice that you received text messages. I would like to know if there is any possibility of installing an application to send and receive MMS

  96.   berlin said

    The wifi thing is most likely misconfigured.
    If you do not get a Wi-Fi signal on your iphone, restart it several times ...
    If it gives you a signal but it does not work, check the configuration data when it does not suit you and you will see how the IP is not yours.
    With regard to MMS, it depends on the operators and it can hardly work if the operator does not leave. In any case, it is a subject that I do not touch and I cannot explain it to you with certainty.
    Disconnect APN which is possibly one of the things that is giving you problems

  97.   Sergio Ivan said

    Hello Berllin,
    This is the third, and it will be the last time I address the issue of an unfinished problem ... NO Wi-Fi .. !!!

    I can tell you that rereading all the previous information exchange, I was struck by Mickey's question, on November 8th, 2009 10:31 pm, which mentions if your custom firmware is suitable for a 2G iphone with Baseband 05.11.07, at the same time which you replied that the Blackra1n is specific to that Baseband.

    However, my iPhone 2G has the version: 04.05.04_G. Is that the reason why the Wi-Fi was permanently disabled (gray) and out of service? ... The phone works without any problem but the Wi-Fi is dead.

    I promise NOT to ask you more about it, but the previous recommendations, which I appreciate, failed to re-enable Wi-Fi. Thanks.

    Regards!

  98.   berlin said

    Sergio Ivan
    If I answered that, I said it wrong, since the 2g gives the same baseband. I would think it was a 3G

  99.   navabest said

    I am in the same situation as Sergio Iván, my WiFi is dead ... and I have already tried with Blackra1n and he tells me to wait for reboot and the process does not follow, I have already tried with all the USB on my PC and nothing ...

  100.   javier02 said

    Berlin
    Hi how are you download the___ iPhone1,1_3.1.2_7D11_berllin_Restore.ipsw __
    and it works perfectly on my iphone 2g, it just has one problem.
    The problem is that the iPhone turns off suddenly, so I read it may be the light sensor but I really don't know, what do you recommend I do to solve my problem and have the phone working at full capacity ???

    Thank you very much in advance!

  101.   silvina said

    Hello berllin
    I've been reading tutorials since yesterday and I'm getting more and more lost
    I update my iPhone classic with Itunes from the first version to 3.1 I think ... and the screen is locked with the cable and it says Itunes ... and only emergency calls
    Please help me find a program that unlocks it for me ... I no longer care to have the latest version that I am satisfied with.

    many thanks

  102.   silvina said

    Days go by and I keep trying everything… I have your firmware 3.1.2 installed as requested in this tutorial. I open the blackra1n in recovery mode… and after that, NOTHING MASSSSS… ..please help me… I don't know what else to do… I want you to walk¡¡¡¡¡
    i need to get my iphone back
    PLEASE

  103.   berlin said

    navabest
    When you get "wait for reboot", disconnect the USB cable for a few seconds and reconnect it and as normal it will pick up again after a white screen.
    ———–
    javier02
    completely reboot the iPhone and if you continue with the same restore it again
    it doesn't have to turn off ...
    ———–
    silvina
    this is the simplest tutorial. but if you don't get a try with this one:
    https://www.actualidadiphone.com/2010/02/06/tutorial-jailbreak-con-el-custom-firmware-3-1-3-modificado-para-el-iphone-2g/
    Or with this:
    https://www.actualidadiphone.com/2010/02/05/tutorial-jailbreak-con-redsn0w-0-9-4/

  104.   Javier said

    BERLIN.

    I have restored the iphone several times and with different software but it keeps shutting down.
    Do you know what it could be and if it is a hardware problem that is failing?
    almost always when it goes off is when I have it in my pocket for "long" moments, (1 hour).

    Greetings.

  105.   berlin said

    Javier
    It doesn't have to turn off.
    If it happens, it is a motherboard or battery problem

  106.   lupeto77 said

    Thanks Duck. For those who, after restoring the iPhone edge, they kept getting an emergency call, the solution really is to download the firm that appears here. Do not be stubborn that because of my stubbornness it takes 2 days to do it. Read the duck post. Thank you Berlin

  107.   Daniel Miranda said

    yeahhhhh to thank you man !!!!!!!!!!

    everything works now !!!!! 3.2.1, jailbroken and released
    ready to talk: D: D: D: D
    now I have telcel and the whole thing
    facebook twitter, everything 😀
    I am very happy: D: D: D: D

    thanks berllin

  108.   Oscar said

    Thanks !!! The tutorial was very helpful, it is excellent! Thank you !!!

  109.   Daniel Miranda said

    A month ago I did the whole process and everything was cool, but I have realized that it uses up my battery a lot more: S: S: S: S: S is there any way that I no longer spend it so much?

    or in any case, is there any way to go back to 1.1.4 jailbreak and released?

  110.   MP said

    Hello I wanted to know what happened if in the BootNeuter part of the version part I put 3.6 instead of 4.9?

  111.   aga said

    hello bellin your tutorials are great and very simple one thing is true, you are an iphone genius congratulations for so much dedication to the ignorant like me, so much technology at hand.

  112.   Alexander said

    excellent contribution

  113.   jonathan said

    Thanks bro the net at first I was scared because it did not recognize my chip, but in the end everything went well I only have a doubt that it is useful to unlock the EDGE.

  114.   josep said

    hello io i saw it but no more a white man came out with 3 iphone i ia no more than the apple

  115.   Laura said

    Hello! I do the whole procedure and the screen goes black and if I get the little window that says "Enjoy your jailbroken iPhone ..." But I don't get any geohot, as I mentioned the screen stays black. I had already tried several times and after a while, the black screen is removed and I get the same image as at the beginning, that of the iTunes logo and the white cable. What can be wrong? Thanks

  116.   Luis said

    2015 and if it worked thanks