Attention: I only recommend this tutorial to people who have the iPhone in a drawer for having updated and who need the release to use it, do it at your own risk, you will modify the baseband, which has no reverse gear and is easily detectable by Apple; also from now on it will give you an error every time you want to update to an official firmware, you can only update with Custom Firmwares.
Don't do this process on an iPhone 4 or you run the risk of messing it up. ONLY FOR IPHONE 3G and 3GS
With that said, we start:
If you have one of the following basebands you don't need this process, just install ultrasn0w from Cydia:
04.26.08
05.11.07
05.12.01
05.13.04
06.15.00
You will only need it if you have:
05.14
05.15
This is the tutorial for Windows, you will need redsn0w 0.9.6b5, download it here.
Download the IPad 3.2.2 IPSW by clicking here.
and the iPSW 4.2.1 of your iPhone, download it here.
The first thing you have to do is update your iPhone from iTunes to the official version 4.2.1, you will have to do it with SHIFT + Restore and with the firmware that you have downloaded above
Once this is done open Redsn0w to jailbreak iOS 4.2.1 and install the baseband of the iPad (from the IPSW of the iPad).
Select firmware 4.2.1 of your iPhone first
Choose install Cydia, install iPad baseband and the extra options you want.
(I don't recommend multitasking on iPhone 3G)
Follow the steps to put it in recovery mode.
Once this process is done, our phone will start with jailbreak and the baseband 06.15.00
We entered Cydia and installed ultrasn0w and voila, our free iPhone.
NOTE: it is a tethered (tied) jailbreak for new 3GS bootrom, it will be necessary to restart with Redsn0w each time.
Could anyone help me find ultrasn0w 1.2 in .deb? I do not have Wi-Fi and I cannot use the internet on the mobile because it is not released yet.
Well, nothing, haha, I have also achieved it.
Gnzl this part I don't understand. I found it on the team dev blog. I don't know if you can help me: If you have an iPhone3GS with an old bootrom, use redsn0w for an untethered 4.2.1 jailbreak (it can now install the iPad baseband too).
Is the tethered jailbreak not only for 3GS with new bootroom? In the 3G and 3GS old bootroom there has never been tethered.
Obviously it is tethered for 3gs new bootrom.
Puxa, I think the title of the tutorial itself is your answer.
gnzl, could it be done with 4.1 so as not to lose the untethered that we have not uploaded to 4.2.1 ???
Thank you
Is it possible that having the 4.1 have the baseband 05.14.02? so I would have to update to 4.2.1 and release it with the ipad thing?
He tells me that if so, I will get a card from my other operator, and so I don't have to use the ultrasn0w.
As always errors .. where it says open redsn0w to create a custom firm you should put pwnage tool .. see that the post is short and it is easy to verify that there are no shits in a process like this, in which if something is done wrong you can load the phone. A bit of professionalism.
lluevert, it is advisable to read before criticizing, because if you do not make yourself look ridiculous.
Knowing the difference between Windows and Mac is usually good too.
Let's see if you value my work more and appreciate it, instead of criticizing saying NONSENSE
How about you stop saying lluevert nonsense? Before saying atrocious read a little, you weren't even able to read the entire title.
As specified in the title, it is for Windows, and the tool that corresponds to this OS is redsn0w, if it were to speak of Mac OSX it would be pwnage tool.
Have a little professionalism.
Well, I think I have the first brick.
Gnzl, lucky you have corrected the last part, right? After passing the redsn0w there is no need to restore again with iTunes, right?
I have just done all the steps and now I am going to apply ultrasn0w. Although I have not followed your tutorial to the letter, I appreciate your effort 🙂
Hello-2
Let's see if you can help me because I no longer see a possible solution. I have a 3G iphone. I had the 4.1 on jail and 05.14.02. Install 4.2, I followed this tutorial and everything is fine. When finished, since I don't have Wifi, download a .deb from ultrasn0w and install it with diskaid. It did not work and I entered Cydia and said that I needed to have mobiles installed. I downloaded a .deb del and put it in autoinstall, and when I restarted the mobile it stayed in the apple and did not go from there, alone and restarted. I tried to pass the redsn0w to it and it gave me an error, so I went through iTunes to put 4.2 and do it all over again, but it gave me an error. Now the iPhone is in recovery mode (you can see the cable and the logo) and I don't even know how to get out (I already tried several programs) or what I should do after quitting ...
Thanks in advance if you help me
gnzl
I have followed the steps scrupulously, but the redsn0w hangs on me indefinitely in "wating for reboot" ... why is this?
@ Adrián, to restore from now on, you will have to do it with the custom fw that you created via redsn0w, no original fw will work for you.
@air_alex, that's because you have Windows Vista or 7, before running redsn0w, left click and put it in compatibility mode with Win XP.
And where do I get it from?
Thank you pablo…
The problem now is that redsn0w gives me the Done, but the terminal stays with a black screen and nothing happens ...
@ Adrián, you were supposed to do the custom fw with the redsn0w.
@air_alex, does your screen go black at what point? When trying to put it in DFU? If it is there, follow the steps, it is easy to put it in DFU.
Yes, but it installs automatically, it doesn't 'give' any files. If I had a file of that firmware I could install it from iTunes, but I don't have it.
can anybody help me???
I have carried out all the steps, and correctly, but the moment the iPhone restarts, it doesn't go from there, the redsnow stays in »waiting for reboot», and I don't know what to do ...
@ Adrián, my fault, then I can't help you, if I read or something occurs to me I'll let you know.
@ iv @ n, read the comments, I already answered that, it is because you have Windows Vista or 7, you have to put the redsn0w in compatibility mode with XP.
I know, but I have windows xp, and if I do the compatibility in the drop-down menu, windows XP does not appear ... I don't know what to do ... would you know how to help me Pablo?
Thanks in advance…
2 questions I have a 3g with 4.1 and baseband 05.14.02.
1st: If I use this, every time I turn on the iPhone will I have to start it with that?
2nd: Since I have 4.1 to apply the custom firmware, first I have to update to the official Apple 4.2.1?
Please help me I'm desperate! Thanks!
I don't know what I'm going to do .. right now I have a paperweight ..
Wender, you won't have to rip it off with that. Yes, install the official one and then follow the tutorial.
I had my iphone 3gs (new bootroom) in 4.1 with baseband 05.14.02, I restored through itunes to 4.2.1 and followed the steps of this guide with redsnow, everything perfect, the images of the jailbreak came out on the iphone, and the redsnow gave me the donation. When the iPhone did the reboot to turn on, it stays on the apple logo and after a while the little circle comes out loading, and from there it doesn't come out ... does anyone have the same problem? Does anyone know what could be due or the solution? Thanks in advance
OMG!!!!!!
How many times do you have to say it!
It's tethered !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!
You need to restart it using Redsn0w ALWAYS!
@HH, you messed it up, as I think I should have waited for the Pwange Tool (or done it from MAC) since you have a 3GS New Bootroom. Sorry 🙁
That is the problem that I had when I tried to install the mobilesubscribe. After that I tried to restore it with iTunes DO NOT DO IT, if it does not stay on the recovery mode screen and there is no way out of there for now ... (that I know of)
Gnzl if that goes for me, my installation is untethered
It goes for hh.
.
YOU WILL NOT BE ABLE TO RESTORE IT WITH A CUSTOM, YOU NEED TO PUT THE IPHONE IN A DFU MODE THAT WILL ONLY GIVE YOU PWNAGE TOOL.
.
Please read the post.
I'm downloading a custom 4.2.1 firmware, I hope I can restore it from there ...
I have managed to put it in DFU via Redsn0w. Adrian, if this works for you, I have managed to put it in DFu with redsn0w and I have found a custom 4.2.1 firmware for iphone 3gs made with pwnagetool 4.1.3
And why do you have to download the ipsw from the ipad? I do not see that he makes it work, because he does not ask me at any time
I think that if you don't have the ipad baseband, it won't do me any good .. if you do, you could send me a link to 'amshun @ gmail.com' (without the space between the g and the at.
Regarding my problem ... someone could tell me something ... that the redsnow does not pass the "waiting for rebbot", and of course, I cancel and the iPhone is useless ... what do I do please ... thank you ...
If someone could upload 4.2.1 with ipad baseband to megaupload, he would do me a BIG favor .. or at least explain how I can patch it.
GNZL a question if it's not too much of a hassle. I have the iphone 3gs new bootroom in 4.1 with a custom. I just went to cydia to install an application and it said that it had 4 updates, one of them from ultrasnow. What do I do, do I update everything or do I not update the ultrasnow? Because as I have read that you have to install the baseban of the ipad… .but I don't know if for 4.2.1 or for all oq…. Thank you very much
djdared, in theory the new ultrasn0w should not modify anything on your device, but if it suits you now I would not install it.
Hello. I only have a simple question, because I have understood the whole process and it seems clear.
I have a 3GS newboot with iOS 4.1. As I want untethered, I would not update to 4.2.1 and it would be enough to put the baseband of the iPad and everything would work fine.
Now one thing: if I want to sell the mobile for this I will have to reset it and then ... how would the new owner start it? I think it could no longer be standard, right? From this Ultrasnow, would I depend forever on Jailbreaks and Ultrasnows to work and would my mobile be unsaleable?
Yes, to sell it would give you problems because the buyer could not restore it except with a custom
you have to go up to 4.2.1, I don't think I will let you stay at 4.1
Do you know if you can make custom firmware to 4.1 + baseband of the ipad?
Thank you very much gnzl! You are doing an incredible job.
Gnzl, in Foroiphone there is a tutorial to do it in 4,1
and to do it on a 3GS 5.14 UNTETHERED? I don't like the idea of tethered
I have 3Gs, iOs4.1, BB 6.15.00, FREE !!!, without having to install iOs4.2.1 and return my iDevice Tetherer ... any help you need just let me know ...
gnzl, I managed to fix it, now I have it in 4.1 and baseband 06.15.00 !! If someone had the same problem as me, I can show you the steps to follow, they are very simple. Good luck with the unlocks!
Hello! It would be good if CesarGT and hh upload a tutorial or how they did to release the 3GS with firm 4.1 ... I have my BB on 05.14.02 and I am not interested in having 4.2.1 if tetherer lets me ...
Thank you
Friends if you can help me, I see that everyone speaks on their iphone with firm. Baseb .. 5.14 .. and 5.15… that I am clear about the whole process how to do it…. My question, I have an iPhone 3gs (boot old) Illegal, at the moment with Firm 4.1 and basb .. 5.11.07 released with ultrasn0w 1.2 without problems, can I update to firm 4.2.1 without uploading my baseband or do I have to update it to ipad baseband
TUTORIAL 4.1 ON THE COVER; THANKS TO THOSE WHO HAVE NOTIFIED
Hello everyone, I have had a problem with the update and I was left in recovery mode (the one with the symbol with iTunes) so I thought about downgrading to 4.0 and there I was blown away because the upgrade has been made and I have the baseband from the ipad hehehe wno I put this for who there had the same problem as jo
greetings and I hope it serves you
Man .. finally ... at this frim I was waiting to upload my iphone 3g
that now I have it in 3.1.3
I will pass it to 4.2.1
goes well no? ¿? ¿?
i will do it tonight
The firmware does not load, it says that it is not compatible with my iphone 3gs 4.1 5.14, what can I do?
My iPhone 3G remains in installing activation Bundles and does not continue and does not load me and always appears in restoration mode in iTunes and does not allow to restore the downloaded and modified fw. Any fw that is well modified to fix this problem? PS: I am desperate !!!!
Hi, how are you.
I have a question, with the Redsn0w process I can put cydia on my iphone 3GS, it is legal, already updated with the latest version 4.2.1
I am looking forward to your response.
Thank you so much!!
Dummy you had the same problem as me but mine is a 3gs and I have solved it by downgrading from 4.2 to 4.0 and now it works perfectly and I have kept the baseband of the ipad, it will not work for you since it is not the same iphone
Hey there..
After having my iPhone as a paperweight for almost 6 months, it finally works for me.
perfect, I don't recommend activating the multitask.
Thank you, iPhone
Hi, I have done all the steps but when loading the apple he has been thinking, and he has not started or left it for 20 minutes. I have tried again to load the firmware and repeat the process and I have not achieved anything, it dies anyway.
Now I only get the cable and the itunes logo.
I don't know if I can restore it again or not ... answer me here if you can
https://www.actualidadiphone.com/foro/viewtopic.php?f=3&t=17073&start=15
Thank you very much
my question is the same I have a 3g 4.1 with bb .05.14.02 with jailbrake. Now my question is if I can upload the bb from ios 4.1 without losing the jail and only upload the ipad bb and then do the unlocking with ultrasnow and unlocking the mobile without any problem
Hello, I had a problem, I did the jailbreak with redsnow and it has done everything right but the iphone at the end of the jailbreak has restarted and does not turn on .. it has been left with the apple as starting and does not start .. it carries as half an hour like this. Is it normal? What can I do?
thanks in advance
What you have to do once the apple appears is to start it with the dev team tool and put the option that says that it only starts the boot… .. this happens because your procedure is thetered
Hi guys. First thanks to Gnzl for the magnificent tutorial to unlock the iPhone. I have the 3G since it came out in Spain. I had firm 4.1 with baseb. 05.14.02. I did it as it says above and it came out to me first. I have two mobile numbers in Spain and the main one was from Orange, but my legal iPhone as you know is from «Vomistar». As before, now I am going to use the iPhone also in my country of origin Bulgaria. Good luck to all and a lot of patience , everything will be settled.
then ami I also get the apple where I find the dev team tool to put it in the option that only starts the boot ?? !!!
I already did all the steps and everything went well, it is released but the signal of the sim goes away at all times, what can I do, help?
I couldn't restore it or anything. Now it is time to have the paperweight mobile, because it is no longer even an ipod touch
Friend, my iphone 3gs 16 Gb that was fine, it had 3.1.3 and I updated it to, 4.1 and the base band 05.14.02 and it crashed they told me that in a few days the Ultrasnow 1.2 came out in cydia the Ultrasnow 1.1.1 appeared to me .1.2, and yesterday I checked it and I already had the Ultrasnow XNUMX install it and I put the Sim card in it, it stayed in Searching and searching and did not find anyone I have no signal that I should do or that I did bad help please Thank you in advance I from Venezuela
to all those who don't know how to do it:
1.- download the 2 firmwares and the redsn0w tool
2.- once this is done update the iphone from itunes smash shift + update (the tutor says shift and restore must be the same, just in case smash shift + update that one has already been verified by me ……………… I have already taken 2 unlocked iphones)
3.- Once the update is done, open redsn0w and open the firmware of the iphone and there choose the option to install the "ipad baseband"
4.- once everything is done (your iphone can be blocked in the apple) if that happens open redsn0w and choose the option "just boot tethered rigth now" so you will have to enter the same as your iphone every time you turn it off ... …… .. apparently in certain versions if it grabs well…. meanwhile if your iphone is locked you will have to do a tethered boot
It worked perfectly for me, thanks for the tutorial!
robert you can add me and by msn explain it to me because I'm about to throw it out the window !! 😀
ritucillo@hotmail.com
Help !, I already did the tutorial as is for pwnage tool 4.1.3 to the FW4.2.1 version, I mean I already uploaded the baseband to 6.15 and everything was perfect, and I recognized it perfect, nothing else was missing the unlock but the cydia did not open it , then I decided to restore it to the original 4.2.1 without custom FW and from that moment on it won't let me do anything, it always stays in restore mode with the itunes logo, and I put it in DFU mode and iTunes also finds it but it fails at the time of restoring it in any version 4.2.1 custom and 4.2.1 original and the errors that come out are 1600 and 1015 that I can do thanks and greetings!
Help!!!! Please!!!
It happened to me like Adrián 61, does anyone know how to solve it?
I really hope your answer !!!
Cheers.!!
What I did was, do the whole procedure as is but after uploading the baseband, I installed the original fw 3.1.3, after it gave me an error on itunes I went to redsnow 0.9.4 which is the one that works with that fw, I tried to do the jb with 2 unsuccessful attempts, it was stuck in the pineapple with feet and the itunes usb cable came out, but on 3 try VUALA worked and I hacktivated the iphone, now I have it released and with fw 3.1.3 which is the What I like the most because there are several useful applications that work and since it is 3g it lowers performance a lot in 4.x
I have found a solution for my Iphone 3g, about error 1015.
i first jailbreaked, but my phone crashed so it became 1015: (
But after that I am solution unlocked + jailbreaked with 6.15.00
You have to restore with IPSW 4.1
then the error will come, but that is normal, click OK and ignore it.
After that, Redsnow is running, select the ipsw 4.1 and select (update bb 6.15.00) again
after the jb I could get out of the trap dfu
Copied from Dev Team, I have tested it and I have the mobile working and released !!! Mine was 4.1 3gs, I peto with the procedure that did not start apple, it was kedaba with usb ... everything possible has happened to me and now everything is perfect
Good luck guys I did not see light at the end of the tunnel and I already have everything ok
I have the same problem but my iphoneeeee does not start and when I want to restore it with itunes I get error 1015.
HELP!
I have done everything accordingly, I updated my iPhone 3G to iOS 4.2.1, I did the jailbreak with Redsn0w raising the baseband to 06.15.00 and I did the unlock with Ultrasn0w, and when doing the jailbreak I multitasked and I regret why not it goes well and crashes, and now I want to remove it and I need to restore and do everything again so that the iPhone is clean, but since I cannot restore with an original firmware I need a custom firmware
Please can you post custom firmware for iPhone 3G with baseband 06.15.00 so that I can restore and jailbreak with Redsn0w and unlock with Ultrasn0w?
I'm asking you because I'm a Windows user and I don't like Sn0wbreeze at all, if it can be used ...
THANKS IN ADVANCE
For all those who kept the apple logo and do not know what happened, it is because their i phone is tied. what they have to do is go back to the redsn0w software, give browse to mark the firmware that we had already used on 4.2, then the options come out and mark: just boot ... and he guides them to restart their i phone from the computer, until the wonderful pineapple comes out on the run. enter cidia release it (in manage, then source and there mark ultrasnow) and the i phone does a reboot. Then they perform the operation that I just explained to you again with the redsnow and voila i phone with jailbreack and the bands released. Good luck to me, it's 4 in the morning and so far I have managed to do everything right.
Good morning, I read all your comments to be sure that someone would answer my questions but it was not like that.
I have an iphone 3gs with ios 4.1 and baseband 5.14.02 that is blocked only for a cellular company I cannot use it except with O2 from the US. I would like to be able to use it with Personnel from Argentina and release it for that with the procedure that they name here.
Is it possible to unlock my iphone even if it is not already unlocked?
Since it is locked with ios4.1, is it safe to upload it to ios 4.2?
At the beginning of everything I only have to update with the ios 4.2 that I download and then apply the redn0w to it?
If, as it happened to me many times, when updating it throws an error of any kind telling me that I cannot update, that has already happened to me many times?
I hope you can clarify some doubts for me 🙂
Hola!
I did everything but in the redsn0w I do not see the option Install Ipad Baseband, nor many, just install Cydia, install custom bundle, Just boot tethered right now and Just enter pwned DFU mode righr now.
I already tried all these and it always remains in limara1n explooting.
Now my iphone is in DFU: /
I managed to do the jailbrake without problems, then I entered cydia to install the ultrasnow and it did not leave me due to a version problem of the mobilesubstrate, when I was going to update the mobilesubstrate I ran out of wi-fi and did not want to grab the wi-fi anymore, What can I do to install the ultrasnow and the mobilesubstrate, or to make the wi-fi work for me, is it because it has stopped working? help please, thanks!
Hello aver, I have the 4.1 with jail. It's from moviestar, if I put another moviestar card on it, it won't work? Because this is how I happened to update and I don't have to install ultran0w to use the other moviestar card, right?
the solution to the error (1015) friends I found this I did it and it works
Many people are concerned about the 1015 error (same as the picture below shows), that is after the iPhone 3G / 3GS have jailbroken when the band have been updated to iPad 06.15:1015, and then when trying to unlock the phone it hangs on apple logo, and then if you try to restore, the error 1015 appears. Worry no more. Here is a perfect solution for fixing error 3 on IOS 3GS / iPhone 4.2.1G XNUMX.
If you take this method, you don't need custom firmware, but you must download the following tools:
1. Download RedSn0w 0.9.6 beta 5: Mac / Windows.
2. Download IOS 4.1.2 firmware for iPhone 3GS / 3G;
3. Download IOS 4.1
About the detailed jailbreak process, you can refer to this tutorial: Download Redsn0w 0.9.6 beta5 to update iPhone to 3GS / 3G baseband 06.15.00 (Tutorial).
Now let's take a look at how to troubleshoot a 1015 error.
After your iPhone is jailbroken, if your iPhone stuck on the app logo, don't worry, we just need the basband for unlocking.
Step 1: Put iPhone in recovery and restore mode with IOS 10.1 4.1 with iTunes, then error 1015 appears when iPhone is already in recovery;
Step 2: Download iREB;
Step 3: Fix boot, we already have our iPhone with new basband.
Step 4: Take Redsn0w 0.9.6 beta 5 again from our iPhone with firmware 4.1 IOS. It does not matter to install the 'iPad baseband update, only just to install' Cydia '; in accept.
Step 5: Now go to Cydia to install Ultrasn0w 1.2.
Bingo!
What happens to me? It turns out that everything worked out for me because I did everything with a CUSTOM, everything works perfectly, I have done it on 2 devices in 3g and 3gs new bootrom (obvious in 3gs with 4.1) well the issue is that I wanted to try my GPS location today but it doesn't give me an exact point! In neither of my 2 devices, I turned down the MOTIONX GPS to see the signal and nothing does not connect as if the GPS had disappeared from the face of the earth !!! Does it happen to someone?
good I have done everything step by step, I put my orange card and he catches it but without the coverage it is a 3g of 16g, which may be I am desperate
Carlos if you don't get coverage, there are 2 reasons one of which your iPhone is legal and maybe the imei is blown up (it happened to me) and another one of which maybe the sim is not right, try another to see how it is !!! by the way someone out there who gets me out of this problem and tells me if the exact location of the GPS works for him because it doesn't work for me !!!!!
When I launch the resdnow, I select the firmware, it takes it, but suddenly I get an error windows message, that the program should be closed and the iphone is left with the hard disk in the background…. Has anyone passed it on?
the most practical, change the machine or with one with windows xp! if it has happened to me and to avoid turning the matter around, change pc with windows xp !!!!
The same thing happened to me with my 3gs (new boot) but I managed to put it in dfu through redsnow and then I restored with a custom firmware of ios 4.1 and baseband of ipad (06.15.00) then when I finished restoring I got an error (1015) and se. And I left the mobile in "recovery mode" I turned on the tinyumbrella and with the iphone plugged in I gave "exit recovery mode" and voilá ... iphone in 4.1 with jailbreK unthetered and baseband of the iphone, from there, download the ultrasn0w and released iphone Any questions about a similar problem, ask me and I will try to help you, greetings, and good luck
Excuse me Hh who is that for?
Good, here again, I do not understand something in this tutorial well, the steps to free it are clear yes but there is a variant that I cannot understand, I update to ios 4.2 with itunes yes? later I go to ios 4.2 with shif and that's good, all that with i tunes at the end I open the redsn0w and go back to look for the ios to download if? But then so that under the ios of the ipad is what I can not understand hopefully help me is that I want to release my phone but I do not want to end up locking it even more.
Thank you, I'm looking forward for your answer
hello tgo iphone 3gs version 4.1 baseband '5.14 I did everything from the turorial ..
worse my iphone is stuck in installing activation bundles…. or if it doesn't stay stuck in the intalling baseband,…. it stays stuck until it restarts and the itunes logo appears with the usb cable… I can't restore it because in itunes I get error 10 15… ..
now I can't use my iphone 3gs .. neither as a cell phone nor as an ipodd …….
I miss everything that has been published and even so, I don't recognize anything… ..
my mail is
francisco.dinamarca@live.cl
I'm from chile…. help….
FOR THE MINEROSSS¡¡¡¡¡¡
It was not for you, but for those who are having problems that the iphone remains in the apple logo or that they cannot restore it with itunes because it gives them an error for having the baseband 06.15.00
Francisco, if after the error 1015 you have been in recovery, use the TinyUmbrella to get it out of there, and the iphone should start you
Pablos08 I have seen several guides that say that you have to download it, but then you do not need it at any time
I had Aplique that!!!!!
what he did Hh and IF IT WORKS !!! THANK YOU HH
«The same thing happened to me with my 3gs (new boot) but I managed to put it in dfu through redsnow and then I restored with a custom ios 4.1 firmware and ipad baseband (06.15.00) then when I finished restoring I released a error (1015) and se. And I left the mobile in "recovery mode" I turned on the tinyumbrella and with the iphone plugged in I gave "exit recovery mode" and voilá ... iphone in 4.1 with jailbreK unthetered and baseband of the iphone, from there, download the ultrasn0w and released iphone , Any questions about a similar problem, ask me and I will try to help you, greetings, and good luck »
Nice to contact me.
I have an iPhone 3G with 3.0.1, which I wrongly jailbroken 4.1 leaving a brick for a couple of weeks. Today I found out about the unlocking and I couldn't take it anymore and I did the process with redsnOw 0.9.6b5. All very well I stopped having a brick but now I have an iPod because everything except the phone icon appears to me !!! Help if someone can help me a lot I will appreciate it since I am super lost without my work tool. My regards to all and thanks for listening to me, CARLOS.
How to use the tinyumbella does not recognize me, the iphone gives me some numbers and I give it exit recovery and it remains on the screen with iyunes and a usb cable
everything was perfect
io i have firmware 4.1
what I did was open the redsn0w
I loaded the firmware 4.1
I clicked on activate the ipad baseband and put it in dfu mode
everything else I charge alone
Greetings race, here we go for anything
@Hh Hey man give me the Link of your umbrella that mine does not have the exit recovery mode option enabled. thanks brother
Thank you very much for the clarification, now a question because everyone says that the redsn0w is doing them by clicking on broswer choosing the ios everything to me no 🙁 there is no case that the redsn0w takes the ios tells me that ios does not work; Although I occupy windows 7 in many places, I read that it does nothing, it is only a matter of putting it in compatibility mode, it opens everything to me, ok, but it does not let me add the ios that you are doing great :(.
Once again, thank you very much for the clarification of the ipad baseband.
rodrigo80 is this valid for 3gs with a new boot?
Thank you.
I'm already, I solved the problem that the redsnow was not working, now I just downloaded it to the ios again and it worked, an error must have occurred when I downloaded it but it is already there, thank you very much people 🙂 as soon as I release it, I write to you
Served me !!!! 😀
working !!!!
but I have a doubt ...
FOR Q LOWER THE FIRM OF THE IPAD IF IN THE STEPS TO DO IT IT DOES NOT TAKE ANYTHING ??? v___V
My data network works for somebody the same thing happens to help ::.
I did the jailbreak but I put everything on it but the cydia did not pull me so I put it back in dfu mode and now I can't get it out of there I put it to update I put a custom on it and it doesn't pull that I make custom install helpmennnn plizzzzzzzzzzz
Performing the Redsn0w in 3gs starts me fine, but the cydia icon like the safari icon opens and closes immediately. You know what can happen, I have already done the steps several times and the same thing continues to happen to me. I have it activated with an original card. This case happened to someone.
Thank you
I just want to install cydia on my iphone 3gs 4.2.1 legal without uploading the bb sera, what can I do? what should I do? thanks for anticipating
update with original base 4.2.1 I followed these steps, cage it, restore it with the itune and the bad thing is that it does not let me put the 4.2,1 back in because I put the baseband of the ipad to the maximum that I have reached is to be able Put the 4.1.1 custumisada, the mobile is perfect, for photos and music in an ipad plan but not a mobile one, it does not let me receive or call, someone would know what I can do, I don't know if you can put a base that is 4,2,1, 4 customized, because official does not leave me now, for now I have been on the paperweight mobile for XNUMX days, now I don't even want to move
Because when I download the iOS 4.2.1, for my 3GS, the download comes out compressed in RAR; I unprinted it and I don't have it in ipsw format, so I can't load it with iTunes.
Thank you
I have good news for you, look, maybe it sounds silly, what I did was do it with 4.1, first I restored it with the original it is the same as here, and then I open redsnow and look for the same file with which I restore, and I do the dfu and it begins to be done the job of just uploading baseban already just install ultrasnow and if it worked, thanks salu2
Hi, how are you.
I have a question, if I update my iPhone 3GS to 4.2.1 and my phone is legal, it is from telcel.
and with the redsn0w, I select my original iOS 4.2.1 and just select the option to install cydia and do the whole process, in the end I will have cydia on the phone without problems?
I am looking forward to your response.
Thank you very much.
Greetings.
CARLI666 if you have internet explorer try to download it with firefox before downloading it you must have itunes installed when you are going to save it at the moment it tells you to open with itunes just put save and voila you will have it in the format you need
Guys I need help when doing this I must have the cell without the sim card I am from Panama and the original operator of my iPhone 3G is at & t but there is no such phone here, there is only 4 movistar, digicel, more mobile and clear and the only one that It sells Iphone here is movistar that ago I should leave it without the sim card at the time of doing the process ???? Tell me the sim card should I put it on when I finish the cydia and ultrasn0w ??????? It helps me that it worries me because the last time I updated I stayed on an emergency call and in order to remove that I had to buy one of those sims online and this one I already lost
Please help me as soon as possible in 15 hours I plan to carry out this process
slaifer, using these steps, you can do it with 4.1, I did it a few hours ago to use sim telcel, and it worked for me, I just uploaded the baseband and installed cydia
Hello, excuse me when I downloaded the files they came out compressed and I unzipped them on my desktop but Redsn0w 0.9.6b5 talks about the folders as they should but when I unzipped the iPSW 4.2.1 I got several folders and files I don't get that icon of the cube ? Or I have it to put in a special folder ok ago my iphone is the 3g and it is already updated through itunes but that is my doubt the cube does not appear as I do or what and when I put in browse and I open it in My desktop only appears these 2 folders all_flash and also dfu but none contains anything, please can you help me
People just released it to the iphone wonderfully I told them that the procedure is the same for IOS 4.1 as the one that says here, just download 4.1 and do the redsnow.
Juan, see if you downloaded the "cube" since this you must download the second link by selecting the IOS corresponding to your iphone ipad whatever. The only thing you should keep in mind is to download the cube that is the ios that corresponds to your computer, for example I have ios 4.1 and download it to 4.1 without updating them by iTunes to the new version but it depends on what you have and What do you want to do? If you want to update, you go to iTunes and do it legally, you wait and while you download the one that the tutorial tells you, in addition to downloading the redsnow that is the little program that appears in the images of the tutorial. See what's going on how you like it. I tell you that I did it with 4.1, I didn't update anything from iTunes.
I DID NOT LOSE ANY DATA WHEN DOING IT FROM MY IOS 4.1 WITHOUT UPDATING.
Juan, download it with firefox before downloading it you must have itunes installed when you are going to save it at the moment it tells you to open with itunes just put save and voila you will have it in the format you need
Your rating: Thumb up 0 Thumb down 0
Greetings, I have updated the 3g with itunes I have followed the steps to jailbreak and release it but it asks me to reboot device so it restarts again and I lose the release, it is not like that, please I need help. Thank you
nothing happens adolfo, reboot, there is no such thing as losing the release by rebooting.
And read the cover, there is a tutorial to improve the battery that lasts very little
Thanks, I have rebooted and my card is from yoigo and it does not seem to recognize it, it says out of service, it does not find network. I will try again, thanks
but have you checked that you have baseband 6.15?
have you installed ultrasn0w 1.2?
hello again Gnzl, again when I install ultrasnow, I do the rebbot and it starts looking for the network but it does not find anything, the fact is that if it asks me for the pin I have of yoigo, but then nothing, it stays looking, what can I do? do, leave it as it was before, with 4.0, I don't want to buy a new one until a better jailbrek comes out. Thank you
I have the baseband 05.15.04 and I have used redsnow
Don't you read eh Adolfo? see what the tutorial says:
«If you have one of the following basebands you don't need this process, just install ultrasn0w from Cydia:
04.26.08
05.11.07
05.12.01
05.13.04
06.15.00
You will only need it if you have:
05.14
05.15 »
----------------
«Select install Cydia, install the iPad baseband»
-----------------
If you have not installed the baseband of the iPad, 6.15, it is impossible for it to work because it only works on that baseband!
thank you machine
of nothing
Juuuuigan !!!!
I already did the Jailbreak but Safari and Cydia don't work for me ...
HELP !!!!
by god, when you have a problem say your iPhone and iOS, I am not a fortune teller!
Reboot using redsn0w (tethered)
Hello everyone, I'm very lost and I need help… it happens to me like Randy m2, did you solve it? I've done the steps up to Cydia, which I can't because it won't open ... I don't know why it is .. before I had 4.2.1 with 5.15, but when doing the steps with redsn0w it changed me to 6.15, as expected, but to when installing ultrasn0w I get lost, because cydia or safari does not open and I don't know how to fix it ... what you say Gnzl about restarting, I don't know if it was Randy m2, so it would be useful to me. but I don't know how to restart that ... what do you mean?
Thank you all! All the comments have helped me a lot, because the same thing has happened to me that many of those who have written before .. I hope I can finish with the release ...
In the last step I see "redsnow.exe stopped working", it is a 3GS with 05.15. I've tried a thousand times and nothing ...
run as administrator and in xp service pack 2 compatibility mode
(Luckily I'm a maquero ...)
good, thank you so much for helping us !!
I have a question, I have the 05.14.02, but with version 3.1.2, I do the same going to version 4.2 ??
It is a 3G (model MB760Y) released with the blackrain, and neither with cydia nor with snow I get it to catch the network, it recognizes the SIM, it asks me for the pin, everything is perfect, but then Network not available and Operator not available ... wifi if I have .
Please tell me what to do.
THANKS!
ah! another important question.
during the process: SIM in or SIM out ???
grazie mile again
You can with the SIM inside and in the other issue, you can use 4.1 there is no problem, the only thing you do is raise the baseband to 6.15 salu2
Hello, I wanted to ask you a question, is it possible to unlock an iPhone that is blocked by imei? Greetings!
not Julian
if it is blocked by imei ... doubtful origin
Thanks for answering Gnzl, its origin is not doubtful, it belongs to a friend who had lost it, he made the complaint to the company to block it, they blocked it and gave him another one for insurance ... and now they came to return it to him and only pops up for emergency calls… no way to revive it? greetings, thank you very much
no, call and say you found it and unlock it.
The same thing has happened to me as to some compi around here, I have a 3 GB 16GS, and I have jailed with redsnow uploading to baseband 06.15 this new one, and both with firm custom 4.1 and with 4.2.1 or neither cydia nor safari work, they paste a blank screen and close again, it cannot be released, any solution? I tried to connect via ssh but it won't let me, any other solution? thanks
By God, I do not know how many times I have said it already, is that you do not read?
.
It is a tethered jailbreak, for it to work you have to:
.
Turn off iPhone
Connect it
open redsn0w
load your original firmware
siguiente
press ONLY the option «just boot tethered right now»
kid relax, he's going to give you something, that doesn't work either, I've done it more than 20 times and nothing, cydia and safari are closed
I am very calm, on top of that I help ...
if safari and cydia do not work specifically it is that, the tethered.
Have you listened to the podcast?
Yes now
it's a way of speaking don't worry man, what's the podcast?
is that I do not have to answer Willow comments, I just have to post news, I do it to help, and it gets tired of being told the same thing 20 times ...
listen to the podcast that I talk about jail tethered:
http://www.youtube.com/watch?v=aZThpfEThjA
I understand my friend, thanks for everything and I'm sorry for the inconvenience
neither running as administrator nor in xp service pack 2 compatibility mode… the error always appears. Please help !
I have taken it out, with the ireb, at the end when it finishes you tell yourself to restore it with the firm custom and I got out of the problem, the truth was that it was luxury, greetings
I'm glad to hear that
quillo, when you sleep?
Call it Architorture Willow ...
¬¬
I sleep, but a little ...
Well, good morning friend, it's always good to have a guardian angel there in case the flies, heh, heh, heh
Hello, I followed all these steps as you indicate, everything is fine, but when I was about to start, I got hung up on the block and did not go from there. what I do?
I have taken two like this with the ireb, also in 5 minutes, you pass it to him, then he asks you to restore with a custom and luxury firm, working
I can't install the ipad firmware, can you help me, why is this happening to me?
Men would kiss you if you were a woman XD you don't know how MUCH the post helped me!
Hello. I have a problem. iPhone 3g ios4.1 bb 06.15 (ipad) I want to update it to 4.2.1.
And my question is, if I have to shift restore and version 4.2.1 or how ?? Thank you
You can't, Isma, we already warned you, you can't for now.
who would you kiss?
If possible, I have already done it with two, really, what I have not tried is to lower them, but to raise them yes
but with the iPad baseband already installed willow? sure?
Yes, it is already installed, you pass the reb to it with the itunes open and it tells you to restore, restore with a custom 4.2.1 and working, I assure you that it has given me results with two that were for dragging
and if you update to 4.2.1 for itunes it does not change the baseband if it remains functional by the way I must thank this forum because only then I could make my iphone work that had already been as an ipod with camera for 20 days thanks
Of course, you have the same baseband, which on the other hand is a little risky, but we would have the 06.15 of the ipad
I do not understand why we have to download the IPSW of the iPad 3.2.2 if when we run the redsnow it only asks us for the iPSW 4.2.1 of the IPhone.
With windows 7 the redsnow hangs.
that is the ipad baseband which can be unlocked, the baseband is the tool that makes the device, that is, the phone can communicate and if you do not put the ipad baseband you will not be able to use it as a phone at the moment ok because apple has blocked the baseband of 4.1 and 4.2 I hope it has been helpful
neither running as administrator nor in xp service pack 2 compatibility mode… the error always appears. Please help !
Look first of all, open the task manager and in process, close the ituneshelper, then download and open the ireb and then restore with a custom, the truth is that I have already resurrected two, the last one yesterday and the truth is that it is very easy , regards
Hello, I have a little problem to see if someone can help me I did the whole process and everything worked fine but it started Yesterday when someone calls me or my iPhone does not detect the call I can call or send texts but if someone calls me it does not let me know what I can do I have a 3GS 4.1 06.15.00 please help.
Well I tell you that everything was already there, but the vibration did not work when receiving calls and messages even when it was switched to silence, so I day to the task of passing the redsnow again but since it did not work it occurred to me that restoring it was the best idea and what do you think, it does not work now it is on a black screen and it does not happen from there later I went back to do the tutorial and now the jalibreak does not happen I do not know what happens but it does not come out in dfu mode and well if someone knows what happened they could help me is a 3g with official 4.2.1 and 6.15.0 baseband
I did the whole procedure but I get looking for network and the firmware of the mode remains the same in 05.15, what did I do wrong?
I installed the new update 4.2 but I did it from ituns without using the edited update, that is why I do not change my firmware to 6.15, how do I re-install the update?
When it is in uploading ramdisk is when redsnow stops working ...
Hello I have a problem. When the execution of the post-recovery mode processes starts, it gets stuck in a window that says "waitin for reboot" and nothing happens… .what can I do ??….
thanks!
help ... when I try to recover the iphone with the itunes to version 4.2.1 in the middle of the process it gives me the error 1015 I can not recover it ??? ...
For those who have problems with compatibility (Redsn0w freezes in waiting for reboot)
1. We open redsn0w.
2.Press CTRL + ALT + Del
3. We look for redsnow in the list of processes.
4. Right click, establish affinity.
5. If it does not allow it, you have Vista, click on Show processes of all users.
6.Now yes, establish affinity, we leave ONLY CPU1 checked
Ready
when it loads the mobile Redsn0w it gives me an error and closes !! why can it be? thank you
friend, I try, but I can't do this procedure ... my iphone was sent to me from the usa, and I'm from guatemala ... when I put the sim on it, it doesn't detect it ,,, now, I have to do this procedure with the sim on ?????? and besides, I can't connect or update through itunes ... you could explain me, but with a language for dummies, haha.
thousands of thanks
I have iphone 3gs mc 4.1 bb 06.15 it works for me, but what would you get or what would it improve if I go up to
4.2 and if it is possible to do it, what do you recommend?
Hello, I have an illegal iPhone 3GS, and I did everything that the tutorial says but less download the ipsw from the ipada 3.2.2, well what happens is that I have done many times with redsn0w to jailbreak it and upload the bb to my iphone, and I succeeded After having done it the first time, the iPhone stayed stuck in the block for a long time, so I preferred to turn it off. And I wanted to try to update it with itunes, and I remembered that I can't because I uploaded the bb, so now it's like the fifth time I do the redsn0w thing with installer cydia installer bb ipad, and after doing that, and put it in DFU mode, for that my iphone at this moment is in recovery mode. I just jailbroken redsn0w and I get this, mounting rootfs as read-only… ERROR! AppleBCMWLAN :: handleIOKi t Busywatchdogtimeout (): Error, no successful firmware download after 60000 ms !! giving up… and that I put deactivation, what can I do now! I don't know what to do, I need your help. please upgrade to ios 4.2.1, it is supposed to have bb 6.15…. now i need your help please uu
You explain yourself like a closed book!
You have to update with a custom iOS 4.1 and click on redsn0w only install cydia, because the baseband of the iPad you do not want to install since you already have it installed, you want the baseband to remain.
Thank you all for your explanations. I have an Iphone 3GS version 4.1; I updated to version 4.2.1; I got an error message from the sim; later I restored in the itunes and now is when the iphone has died, I only get the itunes and the cable. I have the Baseband 05.15.04. I'm going to try to follow the steps in this tutorial but I don't understand the first paragraph: «The first thing you have to do is update your iPhone from iTunes to the official version 4.2.1, you will have to do it with SHIFT + Restore and with the firmware that you have downloaded above »I already have the Iphone in 4.2.1. So I skip this step?
well of course!
Thanks Gnzl: I have done the whole process, the screens of the Redsn0w 0.9.6b5 change a bit. The iphone has been left with the apple and it won't let me turn it off. I don't know if I've done something wrong.
Hello, I have a 3gs and I want to know what you mean "will have to restart with Redsn0w every time." This is that every time I turn off the phone I have to pass the Redsn0w?
Thank you
Yes, exactly
And how is it solved does anyone know? Can't unlock it easier? haha!
Have the IPSW of the Ipad when it is necessary to install it?
IS THERE ANY SOLUTION FOR 3GS? IS THERE A WAY TO UNLOCK IT WITHOUT HAVING TO PASS THE Redsn0w EVERY TIME I REBOOT? THERE ARE NO MORE OPTIONS?
I AM NOT INTERESTED IN UPDATING IT, JUST UNLOCKING IT.
THANK YOU VERY MUCH FOR YOUR HELP!!
Uncle I will not speak cydia can you tell me why is it?
Hey man come back and pass him redsnow but now you just mark the option of bootthester and there the cydia will open for you, lucky man
Question, what is the new bootrom number and what is the old one? with the old one you can without passing the Redsn0w to restart? to know whether or not I can do this process.
Thank you very much
mmmm any of you could do this with the iphone 3GS with the 6.04 bootloader ??? since I currently have the baseband 5.15 and the firm 4.2.1 but I have seen many have problems with the release 😛 and I don't know if it can be released by doing this xD?
Once this is done, with version 4.2.1 baseband 06.15.00 throughout the day the iphone is caught on the order of 5 or 6 times having to restart each time it happens. Do you know the reason? You know why or how to avoid getting caught. Thanks
hello thanks when you put waitting roobot an error comes up saying that the program has stopped working you would not know what the reason is? thanks krack
Good for those who have doubts like me 😛 well if I got the base band to 6.15 but I did it with custom firmware, there they look for it in google and they find it 😛 I tell them this since with the custom it did not give me any problem of battery or anything 😀
answer for marprito:
You have to enter every time you go to turn on your iphone or ipod touch tied with the redsn0w where you will have to select the part of —— just boot tethered right now—– and diske the jail process again…. And if what you mean is that you are in waiting for reboot or something like that xD when you are doing the jail do not release the HOME button until the hard drive or the pineapple comes out 😀
answer for face21:
If you have windows 7 or the filthy windows vista you have to put your program in compatibility mode with windows XP sp2 and if you don't have to do this:
waiting for reboot or something like that xD when you are doing the jail do not release the HOME button until the hard disk or the pineapple comes out 😛
If that does not solve anything for you ps add me to facebook and I will help you easier 😀
Answer for Menudo PROBLEMON I have with the iphone:
You only have to do the normal jail without installing the base band 😛 ocea install cydia and the complete jail is done and that's it 😀 if you have more questions just read the comments that I have posted here arr
NOTE for the beginning of this post…. get to answer what they say here or did you just copy and paste: S ????
Hello, I have a 3gs 4.2.1 based on 05.15.04, and I would like to know if I can use this method to unlock it, and what risks do I run ,,, well I await your answers ,,,,,,
HELP ME ……………… .. GREETINGS
Hello, I have a 3gs 4.2.1 phone with baseban 05.15.04,, and I want to know what risk the phone runs with this procedure ,,, I await your answers ,,,,, help
Hello, good afternoon everyone, I have the 3g and in the last step when the jailbreak is done, the redsn0w closes and does not let me finish the process, I have repeated it several times and nothing, what can I do? Thanks in advance, regards
They will tell you a solution about this problem. I'm the same… what did you do ????
Good to everyone, look at what the iPhone 3gs has, do the same but first put your iPhone 3gs in 4.1 from iTunes then at the end it will throw error 1015 do not be scared use tinyumbrella to remove it from recovery and that's it in 4.1 and then do this but Instead of 4.2.1, use 4.1 and that's it, it worked for me 100% and that my iphone 3gs is bootrom again, see you later
THANK YOU!! It is so !!
I had done it previously with an iphone 3gs new bootroom and it worked perfect .. then he brought me another one and I lose the operator signal and sometimes I get it back .. I have done everything and nothing with this condition
He showed me how great it served me… .thanks I thought I had damaged the iPhone in 24 hour tensely menus
now I ask why the hell do we need to download the firmware of the ipad ???????
I have the iphone 3g ... I used ireb rc to put DFU mode ... I put the firmware 4.2.1 of iphone 3g ... then I entered redsn0w and I did the jailbrake ... I entered cydia use ultrasn0w and everything is perfect, only it does not grab me any simcard !!!!! : @ now always says no service !!
I followed all the instructions, but my iphone 3g stayed in the apple at the end of the RedsnOw process, I turn it off and on and it always stays there, what can I do?
Someone who can help me please.
SOLVED THE PROBLEM THAT IT DOES NOT TURN ON (STAYS IN THE APPLE)
As willow34 said, in a previous post, he was right, when the apple comes out and it gets stuck, what you have to do is the following:
1.-Lower the ireb - - - http://ih8sn0w.com/index.php/welcome.snow
2.- download sn0wbreeze-2.2.1
3.- download the ipsw of your iphone
4.- open sn0wbreeze and do the custom ipws
2.- open the ireb, and press the button of the device you have
4.- it will go into recovery mode
5.- open itunes
6.- install with a "custom" ipws that we create
Everything is ready, I have already done tests and I am already calling by phone.
Many thanks to those who contributed to the forum, if I can help with something, do not hesitate to ask me
hello I have done the whole process, download the cidya folder but I have no signal on the mobile that I do
nothing man just your iphone is now ipod touch the same as mine 😀
if you uploaded the baseband to 6.15 you should wait for the necessary programs to fix it ... as well as I ... if you didn't upload it..look for how to put the baseband in version 5.14.13 with the fuzzyband..you download it from cidya ... after that use redsn0w and voila !! Luck!
Hi, I have a problem, I already have version 4.2.1 and I don't know if I have to just turn off my phone and do the redsh0wn thing like I did ????
Excuse me, I'm a newbie 🙂
Greetings to everybody and thanks
does not recognize IPSW with Utrasn0w
hello I have an iphone 3g, and I have the cidya program, and I have the ultrasn0w 1.2.4 installed and I still have it locked ,, I want to know if I can acr something to unlock it ,,
I have an iphone 3gs, one day it just stuck and when I plugged it into itunes I restored to the latest version and with bb 6.15.
I managed to download the version to 4.1 and it continues with the same bb, my question is if I can release it anyway because I tried to do it with ultrasn0w from cydia and no sim recognizes me, it stays in "searching" all the time.
Thank you
Excellent contribution friend..I worked wonderfully now my iphone 3g works wonderfully ,,,,, in addition to having an excellent signal since I am occupying it with telcel ... my iphone is a 3g came with firmware 4.2.1 and baseband 5.15 ... so I raised the baseband to 6.15…. I lowered the rendsnow… and it worked like a charm… thanks friend
Hello, where did you download the programs from because it closes to me .. which redsnow did you use and where did you download it from .. and also where did you download the ipsw from .. thanks
Hi, you know, I have an iPhone 3 but I don't know how to do the first step of iTunes, I need help because I'm afraid of doing something wrong and throw it away = (
that thanks anyway!
Thank you very much fierce, I have flushed my brains looking for a solution and of the hundreds of posts about it that I have read, yours is the only one that guarantees the unlocking of 3g.
Follow the steps that are described to the letter, they are very simple, and in just over twenty minutes you will have the phone working.
Thanks again, greetings!
Where did you download the programs from, it doesn't work for me, my redsnow closes
I do it but it does not happen to me ... that is, when I finish doing the dfu mode and it goes on to do the ipad bb, the redsnow closes
Guys the solution to when resn0w crashes (it happened to me) is that when it detects the device, keep counting on the mind until it reaches the necessary 15 seconds and so it does not move (I already jailbroken it) 😀
Friend, how do I go from tethered to unthetered?
Hello! I am new to this, I have an iPhone 3g with ios 4.2.1 and baseband 05.14 and from what I read all these steps help me to free my mobile but, this only serves to be able to insert a SIM from any company or tbm to download applications that in the normal way, I couldn't because they were superior to mine? Thanks a lot
It remains in Upload Ramdisk ... Please help me ..
Hi all!
More than two years ago I did this tutorial and everything went perfect, but for a few months I had problems with some applications that are no longer compatible with ios 4.2.1 and ask that they be at least 4.3.
For these reasons I began to investigate (since I do not understand much of these things) and I read that in movistar if you gave your data they could release it to you.
By giving them my IMEI they released it, they send a request to Apple and the mobile is supposed to stay free. They told me that I only had to connect it to iTunes with a card that was not movistar, which would give me a message that it was released.
At the same time in some forums I read that if you had the iphoe with jailbreak, it was enough to connect it to iTunes and restore it, which would return to the initial mode. So gice that, I connected the iphone to itunes, gave it to restore, it restored and updated. But now on the mobile it tells me that it has to be activated, it asks me to insert the language, location and when trying to activate it gives me an error. Before configuring anything, there is an information i that if I press on it it tells me the IMEI: the complete code and sim: unknown.
I have no idea how to fix it now… is there a way ??
Thank you very much!
I can not download the ultrasn0w in cydia can someone say xk?
I tried it and it will always lose the signal, the best thing is to do what I did, you updated it to 4.2.1, download it back to 4.1 and limp the signal again
I have an iphone 3g with ios 4.2.1 and firmware 06.15.00, already with jailbreak and cidya installed, but it does not allow me to install the ultrasn0w that appears in cidya, which is 1.2.8, someone could pass a repo or something that it works for my iphone?
please help!!! I already have cydia on my iPhone 3G, in fact I was able to download many applications such as facebook, whatsapp etc, but it does not recognize my SIM card. How can I do it? already install the ultrasnow and nothing. what I do not understand is that you comment on the baseband, thank you ...
Hello friends, you just have to do the process without the sim on, they put it on until they find the url in the cydia later ...
In Cydia, they go to Manage / Edit / Add, and add http://repo666.ultrasn0w.com (that's a 0, not an o)
Now they look for and install ultrasn0w 1.2
Restart the phone, and voila! They can use any chip to have the phone unlocked in iOS 4.2.1
THAT IS JEVI AS DESIMO AKI IN REP. DOM GRASIA FOR THE CONTRIBUTION
Does anyone know how I can release it without the cydia? what happens that my wifi is damaged and therefore I can not use the software, thank you !!! it urges me !!!
excuse me, does anyone know how to release 3g without cydia or any way to get internet to cell? what happens is that my wifi is damaged and therefore I cannot use the software! Thank you, I am very urgent!
Hi, I want to unlock a 3G now but the files are corrupted. How can I do it in a simple way? Since iTunes can't be unlocked, it doesn't work, I don't know why ...
Any help I would appreciate.
Regards!